Bamboo scrimber production: optimization of post-impregnation drying process using a heat pump dryer

References

• Babu, K., and Chandrasekhara, S, 2023. Properties of bamboo fibres: physical, performance, comfort, thermal, and low stress mechanical properties. In: B. Guerin, ed. Bamboo fibres: processing, properties and applications. Kidlington: Woodhead Publishing, pp. 101–135.
   Google Scholar
• Banik, N, 2020. Manufacturing of bamboo composite in the industrial aspect. Materials Today: Proceedings, 26, 2875–2887. doi: 10.1016/j.matpr.2020.02.596
   Google Scholar
• Guo, X., et al., 2023. An evaluation of different pretreatment methods of hot-air drying of garlic: drying characteristics, energy consumption and quality properties. LWT-Food Science and Technology, 180, 114685. doi: 10.1016/j.lwt.2023.114685
   Web of Science ®Google Scholar
• Guo, J., Zheng, L., and Li, Z, 2021. Microwave drying behavior, energy consumption, and mathematical modeling of sewage sludge in a novel pilot-scale microwave drying system. Science of the Total Environment, 777, 146109. doi: 10.1016/j.scitotenv.2021.146109
   PubMed Web of Science ®Google Scholar
• Hu, B, et al., 2022. Flame-retardant single-component epoxy resin cured by benzimidazolyl-substituted cyclotriphosphazene: storage stability, curing behaviors and flame retardancy. Polymer Degradation and Stability, 204, 110092. doi: 10.1016/j.polymdegradstab.2022.110092
   Google Scholar
• Kluppel, A., and Mai, C, 2013. The influence of curing conditions on the chemical distribution in wood modified with thermosetting resins. Wood Science and Technology, 47 (3), 643–658. doi: 10.1007/s00226-013-0530-2
   Web of Science ®Google Scholar
• Liang, E., et al., 2022. Highly efficient preparation of bamboo scrimber: drying process optimization of bamboo bundles and its effect on the properties of bamboo scrimber. European Journal of Wood and Wood Product, 80 (6), 1473–1484. doi: 10.1007/s00107-022-01821-7
   Web of Science ®Google Scholar
• Liang, E., et al., 2023. Feasibility of one-time drying for manufacturing bamboo scrimber: fresh bamboo bundle at high initial moisture content impregnated by PF. Industrial Crops and Products, 194, 116302. doi: 10.1016/j.indcrop.2023.116302
   Web of Science ®Google Scholar
• Lou, Z., et al., 2021a. Fabrication of crack-free flattened bamboo and its macro-/micro-morphological and mechanical properties. Journal of Renewable Materials, 9 (5), 959–977. doi: 10.32604/jrm.2021.014285
   Web of Science ®Google Scholar
• Lou, Z., et al., 2021b. Bamboo flattening technique: a literature and patent review. European Journal of Wood and Wood Products, 79 (5), 1035–1048. doi: 10.1007/s00107-021-01722-1
   Web of Science ®Google Scholar
• Lou, Z., et al., 2021c. Nano-Fe3O4/bamboo bundles/phenolic resin oriented recombination ternary composite with enhanced multiple functions. Composites Part B: Engineering, 226, 109335. doi: 10.1016/j.compositesb.2021.109335
   Web of Science ®Google Scholar
• Meng, Z., et al., 2022. Drying characteristics of banana slices under heat pump-electrohydrodynamic (EHD) combined drying. Sustainable Energy Technologies and Assessments, 54, 102907. doi: 10.1016/j.seta.2022.102907
   Web of Science ®Google Scholar
• Menon, A., Stojceska, V., and Tassou, S, 2020. A systematic review on the recent advances of the energy efficiency improvements in non-conventional food drying technologies. Trends in Food Science and Technology, 100, 67–76. doi: 10.1016/j.tifs.2020.03.014
   Web of Science ®Google Scholar
• Milazzo, M., et al., 2021. Curing efficiency of novolac-type phenol–formaldehyde resins from viscoelastic properties. Macromolecules, 54 (24), 11372–11383. doi: 10.1021/acs.macromol.1c01598
   Web of Science ®Google Scholar
• Motevali, A., et al., 2012. Effective moisture diffusivity, activation energy and energy consumption in thin-layer drying of jujube (zizyphus jujube mill). Journal of Agricultural Science and Technology, 14 (3), 523–532.
   Web of Science ®Google Scholar
• Nguyen, D., et al., 2021. A critical review of current imaging techniques to investigate water transfers in wood and biosourced materials. Transport in Porous Media, 137, 21–61. doi: 10.1007/s11242-020-01538-2
   Web of Science ®Google Scholar
• Rao, F., et al., 2020. Outdoor bamboo-fiber-reinforced composite: influence of resin content on water resistance and mechanical properties. Construction and Building Materials, 261, 120022. doi: 10.1016/j.conbuildmat.2020.120022
   Web of Science ®Google Scholar
• Rao, F., et al., 2021. Rapid process natural bamboo into outdoor bamboo-fiber-reinforced composite with high surface photostability. Forests, 12 (4), 446. doi: 10.3390/f12040446
   Web of Science ®Google Scholar
• Rao, F., et al., 2022. Water resistance and mechanical properties of bamboo scrimber composite made from different units of bambusa chungii as a function of resin content. Construction and Building Materials, 335, 127250. doi: 10.1016/j.conbuildmat.2022.127250
   Web of Science ®Google Scholar
• Ratna, D, 2022. Chemistry and general applications of thermoset resins. In: Edward Payne (Ed.), Recent advances and applications of thermoset resins. Amsterdam: Elsevier, pp, 86–87.
   Google Scholar
• Shukla, S., et al., 2022. Studies on laminated and scrimber composites produced from thermally modified D. strictus bamboo bonded with melamine-based adhesive. Industrial Crops and Products, 188, 115649. doi: 10.1016/j.indcrop.2022.115649
   Web of Science ®Google Scholar
• Stefanowski, B., Spear, M. and Pitman, A. (2018) Review of the use of PF and related resins for modification of solid wood. In: S. Morwenna, ed. Timber 2018. Proceedings Wood Technology Society Conference, 26–27 June, London, UK, pp. 165–179.
   Google Scholar
• Strzemiecka, B., et al., 2014. Assessment of the chemical changes during storage of phenol-formaldehyde resins pyrolysis gas chromatography mass spectrometry, inverse gas chromatography and Fourier transform infrared methods. Journal of Chromatography A, 1359, 255–261. doi: 10.1016/j.chroma.2014.07.045
   PubMed Web of Science ®Google Scholar
• Torki-Harchegani, M., et al., 2016. Dehydration behaviour, mathematical modelling, energy efficiency and essential oil yield of peppermint leaves undergoing microwave and hot air treatments. Renewable and Sustainable Energy Reviews, 58, 407–418. doi: 10.1016/j.rser.2015.12.078
   Web of Science ®Google Scholar
• Wang, Q., 2014. Research on curing process of water-base phenolic resin. Thesis. South China University of Technology, pp. 15
   Google Scholar
• Wang, J., et al., 2022. Morphology, structure and property of high consistency mechano-enzymatic fibrillated cellulose: effect of treatment consistency of bamboo pulp fibers. Industrial Crops and Products, 188, 115731. doi: 10.1016/j.indcrop.2022.115731
   Web of Science ®Google Scholar
• Wei, Y., et al., 2017. Impregnated veneer scrimber properties affected by open assembly time. China Wood Industry, 31 (5), 36–39. doi: 10.19455/j.mcgy.20170508
   Google Scholar
• Wei, X., et al., 2022. Effect of chemical composition and cell structure on water vapor sorption behavior of parenchyma cells and fiber cells in moso bamboo (phyllostachys edulis). Industrial Crops and Products, 178, 114652. doi: 10.1016/j.indcrop.2022.114652
   Web of Science ®Google Scholar
• Wu, F., et al., 2023. Experimental study of bamboo scrimber-filled steel tube columns under axial compression. Engineering Structures, 280, 115669. doi: 10.1016/j.engstruct.2023.115669
   Web of Science ®Google Scholar
• Yu, Y., et al., 2017. Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber. Construction and Building Materials, 157, 1032–1039. doi: 10.1016/j.conbuildmat.2017.09.185
   Web of Science ®Google Scholar
• Yu, X., et al., 2022. Experimental study on effect of drying air supply temperature on performance of a quasi-two-stage closed loop heat pump drying system for lentinus edodes. Renewable Energy, 201 (1), 1038–1049. doi: 10.1016/j.renene.2022.11.027
   Google Scholar
• Zhang, Y., et al., 2011. Glue-impregnation bamboo-mat drying temperature effect on crushed bamboo-mat composite properties. China Wood Industry, 25 (6), 1–3. doi: 10.19455/j.mcgy.2011.06.001
   Google Scholar
• Zhang, Y., et al., 2022. Effects of the resin directional penetration by rolling technology on the drying process of bamboo bundles and bamboo scrimber properties. Journal of Forestry Engineering, 7 (5), 44–49. doi: 10.13360/j.issn.2096-1359.202108034
   Google Scholar
• Zhao, Y., Zhu, Z., and Zhao, F, 2016. Simultaneous control of drying temperature and superheat for a closed-loop heat pump dryer. Applied Thermal Engineering, 93, 571–579. doi: 10.1016/j.applthermaleng.2015.09.117
   Web of Science ®Google Scholar
• Zheng, Q., et al., 2022. Operating characteristics of sludge heat pump dryer and influencing factors of performance: A field experiment in an electroplating factory. Applied Thermal Engineering, 212, 118602. doi: 10.1016/j.applthermaleng.2022.118602
   Web of Science ®Google Scholar