Determination of a mass-transfer coefficient for wood drying by means of thermography

References

• Ananias, R.A., et al., 2009. Using an overall mass-transfer coefficient for prediction of drying of Chilean coigüe. Wood and Fiber Science, 41 (4), 426–432.
   Web of Science ®Google Scholar
• Carpenter, J.H., 1982. Fundamentals of psychrometrics. Carrier Corp, Syracuse, 57.
   Google Scholar
• Carrier, W.H., 1911. Rational psychrometric formulae. Transactions of the American Society of Mechanical Engineers, 33, 1005.
   Google Scholar
• Dalton, J., 1803. Experimental essays on the constitution of mixed gases: on the force of steam or vapour from water and other liquids in different temperatures, both in a Torricellian vacuum and in air; on evaporation and on the expansion of gases by heat. Journal of Natural Philosophy, Chemistry, and the Arts, 6, 257.
   Google Scholar
• Gong, L., 1992. A theoretical, numerical and experimental study of heat and mass transfer in wood drying. Ph.D. Thesis. Washington State University, Dept. of Mechanical and Material Engineering, U.S.
   Google Scholar
• Incropera, F.P., and Dewitt, D.B., 1996. Fundamentals of heat and mass transfer. New York: Wiley.
   Google Scholar
• Kawai, S., Nakato, S., and Sadoh, T., 1978. Prediction of moisture distribution in wood during drying. Mokuzai Gakkaishi, 24, 6.
   Google Scholar
• Lerman, P., Scheepers, G., and Wiberg, P., 2022. A laboratory setup for measuring the wood-surface temperature during drying by means of thermography. Wood Material Science & Engineering, 18 (2), 701–706. doi:10.1080/17480272.2022.2066479.
   Web of Science ®Google Scholar
• McCabe, W.L., Smith, J.C., and Harriott, P., 2001. Unit operations of chemical engineering. Boston: McGraw Hill.
   Google Scholar
• Milota, M.R., 1994. Mass transfer coefficients as a function of position in a lumber kiln. Paper presented at the 4th IUFRO Wood Drying Conference, Rotorua, New Zealand.
   Google Scholar
• Morén, T., 1992. Infrared thermography in the analysis of moisture flux from drying wooden surfaces. Drying Technology, 10 (5), 1219–1230.
   Web of Science ®Google Scholar
• Murray, F.W., 1967. On the computation of saturation vapor pressure. Journal of Applied Meteorology, 6 (1), 203–204. doi:10.1175/1520-0450(1967)006<0203:OTCOSV>2.0.CO;2.
   Google Scholar
• Plumb, O.A., Spolek, G.A., and Olmstead, B.A., 1985. Heat and mass transfer in wood during drying. International Journal of Heat and Mass Transfer, 28 (9), 1669–1678.
   Web of Science ®Google Scholar
• Rosenkilde, A., and Glover, P., 2002. High resolution measurement of the surface layer moisture content during drying of wood using a novel magnetic resonance imaging technique. Holzforschung, 56 (3), 312–317.
   Web of Science ®Google Scholar
• Salin, J.-G., 1996. Mass transfer from wooden surfaces and internal moisture non-equilibrium. Drying Technology, 14 (10), 2213–2224.
   Web of Science ®Google Scholar
• Salin, J.-G., 1997. Prediction of heat and mass transfer coefficients for individual boards and board surfaces. A review. Paper presented at the 5th International IUFRO wood drying conference, Quebec City, Canada, August 13–17, 1996 (11021071 (ISSN)). Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:ri:diva-28675.
   Google Scholar
• Salin, J.-G., 2010. Problems and solutions in wood drying modelling: History and future. Wood Material Science and Engineering, 5 (2), 123–134.
   Google Scholar
• Scheepers, G., Wiberg, P., and Johansson, J., 2017. A method to estimate wood surface moisture content during drying. Maderas Ciencia y Tecnología, 19, 133–140. https://scielo.conicyt.cl/scielo.php?script=sci_arttext&pid=S0718-221X2017000200001&nrm=iso.
   Web of Science ®Google Scholar
• Siau, J.F., and Avramidis, S., 1996. The surface emission coefficient of wood. Wood and Fiber Science: Journal of the Society of Wood Science and Technology, 2, 178–185.
   Google Scholar
• Söderström, O., and Salin, J.-G., 1993. On determination of surface emission factors in wood drying. Holzforschung, 47, 391–397. http://urn.kb.se/resolve?urn=urn:nbn:se:ri:diva-5684.
   Web of Science ®Google Scholar
• Tremblay, C., Cloutier, A., and Fortin, Y., 2000. Experimental determination of the convective heat and mass transfer coefficients for wood drying. Wood Science and Technology, 34 (3), 253–276.
   Web of Science ®Google Scholar
• Wadsö, L., 1993. Surface mass transfer coefficients for wood. Drying Technology, 11 (6), 1227–1249.
   Web of Science ®Google Scholar
• Wallace, J., and Avramidis, S., 2016. Impact of airflow on hem-fir kiln drying. Drying Technology, 34 (11), 1354–1358.
   Web of Science ®Google Scholar