Influence of thermal modification and sanding parameters on finest particle content in pinewood dust

References

• Amyotte, P.R., et al., 2007. Moderation of dust explosions. Journal of Loss Prevention in the Process Industries, 20, 675–687. https://doi.org/10.1016/j.jlp.2007.05.011.
   Web of Science ®Google Scholar
• Aro, M.D., et al., 2019. Particle size analysis of airborne wood dust produced from sawing thermally modified wood. European Journal of Wood and Wood Products, 77, 211–218.
   Web of Science ®Google Scholar
• Aro, M.D., Brashaw, B.K., and Donahue, P.K., 2014. Mechanical and physical properties of thermally modified plywood and oriented strand board panels. Forest Products Journal, 64, 281–289.
   Web of Science ®Google Scholar
• Boonstra, M.J., et al., 2006. Microstructural and physical aspects of heat treated wood. Part 1. Softwoods. Maderas. Ciencia y tecnología, 8, 193–208.
   Google Scholar
• Box, G.E.P., and Draper, N.R., 2007. Response surfaces, mixtures, and ridge analyses, 2nd ed., Wiley Series in Probability and Statistics. Hoboken, NJ, USA: Wiley.
   Google Scholar
• Callé, S., et al., 2005. Influence of the size distribution and concentration on wood dust explosion: experiments and reaction modelling. Powder Technology, 157, 144–148. https://doi.org/10.1016/j.powtec.2005.05.021.
   Web of Science ®Google Scholar
• Chakravarty, S., et al., 2019. Towards a theoretical understanding of dustiness. Granular Matter, 21, 97. https://doi.org/10.1007/s10035-019-0929-z.
   Web of Science ®Google Scholar
• Chatterjee, S., and Hadi, A.S., 2013. Regression analysis by example, 5th ed. Somerset, UK: Wiley.
   Google Scholar
• Dado, M., et al., 2022. Effect of grit size on airborne particle concentration and size distribution during oak wood sanding. Applied Sciences, 12, 7644.
   Google Scholar
• Dzurenda, L., and Orlowski, K.A., 2011. The effect of thermal modification of ash wood on granularity and homogeneity of sawdust in the sawing process on a sash gang saw PRW 15-M in view of its technological usefulness. Drewno: Prace Naukowe, Doniesienia, Komunikaty, 54, 27–37.
   Google Scholar
• Dzurenda, L., Orlowski, K., and Grzeskiewicz, M., 2010. Effect of thermal modification of oak wood on sawdust granularity. Drvna Industrija, 61, 89–94.
   Web of Science ®Google Scholar
• Fujimoto, K., Takano, T., and Okumura, S., 2011. Difference in mass concentration of airborne dust during circular sawing of five wood-based materials. Journal of Wood Science, 57, 149–154.
   Web of Science ®Google Scholar
• González-Peña, M.M., and Hale, M.D., 2009. Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 2: Property predictions from colour changes.
   Google Scholar
• Hemmilä, P., Gottlöber, C., and Welling, I., 2003. Effect of cutting parameters to dust and noise in wood cutting, laboratory and industrial tests. In: Presented at the 16th International Wood Machining Seminar, Matsue, Japan, 375–384.
   Google Scholar
• Hemmilä, P., and Usenius, A., 1999. Reducing the amount of noise and dust in NC-milling. In: Presented at the IWMS 14 (September 12-19, 1999, Paris, Epinal, Cluny-France. Volume 1, Proceedings), 355–365.
   Google Scholar
• Hlásková, L., et al., 2015. Sawing processes as a way of determining fracture toughness and shear yield stresses of wood. BioResources, 10, 5381–5394. https://doi.org/10.15376/biores.10.3.5381-5394.
   Web of Science ®Google Scholar
• Hlásková, L., Rogoziński, T., and Kopecký, Z., 2016. Influence of feed speed on the content of fine dust during cutting of two-side-laminated particleboards. Wood Industry/Drvna Industrija, 1, 9–15.
   Google Scholar
• Hnilica, R., et al., 2017. Use of the analytic hierarchy process for complex assessment of the work environment. Quality & Quantity, 51, 93–101.
   Google Scholar
• Júda, M., et al., 2023. Effect of low-thermal treatment on the particle size distribution in wood dust after milling. Polymers, 15, 1059.
   PubMed Web of Science ®Google Scholar
• Kauppinen, T., et al., 2006. Occupational exposure to inhalable wood dust in the member states of the European Union. The Annals of Occupational Hygiene, 50, 549–561.
   PubMed Web of Science ®Google Scholar
• Kminiak, R., et al., 2021. Granulometric characterization of wood dust emission from CNC machining of natural wood and medium density fiberboard. Forests, 12, 1039. https://doi.org/10.3390/f12081039.
   Web of Science ®Google Scholar
• Kos, A., Beljo-Lucic, R., and Kresimir, S., 2001. Influence of woodworking material on dustiness near the circular saw, in: Proceedings of the Fifth International Conference on the Development of Wood Science, Wood Technology and Forestry. In: Presented at the ICWSF 2001, The fifth international conference on The Development of Wood Science,. Wood Technology and Forestry, Forest Products Research Centre, Ljubljana (Slovenia).
   Google Scholar
• Kučerka, M., and Očkajová, A., 2018. Thermowood and granularity of abrasive wood dust. Acta Facultatis Xylologiae Zvolen res Publica Slovaca, 60, 43–51.
   Web of Science ®Google Scholar
• Lučić, R.B., et al., 2006. Influence of feed speed on emission of fine sawdust during circular sawing, in: Trieskové a Beztrieskové Obrábanie Dreva 2006: V. Medzinárodná Vedecká Konferencia : Zborník Prednášok : 12.-14. 10. 2006, Starý Smokovec-Tatry. Presented at the Trieskové a beztrieskové obrábanie dreva 2006, Technical University in Zvolen, Starý Smokovec-Tatry, pp. 49–55.
   Google Scholar
• Majka, J., et al., 2022. Quantifying the finest particles in dust fractions created during the sanding of untreated and thermally modified beech wood. BioRes, 17, 7–20. https://doi.org/10.15376/biores.17.1.7-20.
   Web of Science ®Google Scholar
• Martinka, J., et al., 2016. Investigation of the influence of spruce and oak wood heat treatment upon heat release rate and propensity for fire propagation in the flashover phase. Acta Facultatis Xylologiae Zvolen res Publica Slovaca, 58 (1), 5.
   Google Scholar
• Nasir, V., and Cool, J., 2020. A review on wood machining: characterization, optimization, and monitoring of the sawing process. Wood Material Science & Engineering, 15, 1–16. https://doi.org/10.1080/17480272.2018.1465465.
   Web of Science ®Google Scholar
• Nylander, L.A., and Dement, J.M., 1993. Carcinogenic effects of wood dust: review and discussion. American Journal of Industrial Medicine, 24, 619–647. https://doi.org/10.1002/ajim.4700240511.
   PubMed Web of Science ®Google Scholar
• Očkajová, A., et al., 2006. Reduction of dustiness in sawing wood by universal circular saw. Drvna industrija, 57, 119–126.
   Google Scholar
• Očkajová, A., et al., 2014. The granularity of dust particles when sanding wood and wood-based materials. AMR, 1001, 432–437. https://doi.org/10.4028/www.scientific.net/AMR.1001.432.
   Google Scholar
• Očkajová, A., et al., 2016a. Efficiency of sanding belts for beech and oak sanding. BioResources, 11, 5242–5254.
   Web of Science ®Google Scholar
• Očkajová, A., et al., 2016b. Factors affecting the granularity of wood dust particles. Chip and Chipless Woodworking Processes, 10, 137–144.
   Google Scholar
• Očkajová, A., et al., 2018. Granulometric analysis of sanding dust from selected wood species. BioResources, 13, 7481–7495. https://doi.org/10.15376/biores.13.4.7481-7495.
   Web of Science ®Google Scholar
• Očkajová, A., et al., 2019. Wood dust granular analysis in the sanding process of thermally modified wood versus its Density 14.
   Google Scholar
• Očkajová, A., et al., 2020a. Occupational exposure to dust produced when milling thermally modified wood. International Journal of Environmental Research and Public Health, 17, 1478.
   PubMed Web of Science ®Google Scholar
• Očkajová, A., et al., 2020b. Granulometric composition of chips and dust produced from the process of working thermally modified wood. Acta Facultatis Xylologiae Zvolen res Publica Slovaca, 62, 103–111.
   Web of Science ®Google Scholar
• Očkajová, A., and Banski, A., 2009. Characteristic of dust from wood sanding process. Wood Machining and Processing–Produkt Quality and Qaste Characteristics, 116–141.
   Google Scholar
• Pałubicki, B., et al., 2017. Influence of feed per tooth on particle size of chips created in particleboard peripheral milling. Annals of Warsaw University of Life Sciences-SGGW. Forestry and Wood Technology, 97, 144–149.
   Google Scholar
• Pędzik, M., et al., 2020. Influence of grit size and wood species on the granularity of dust particles during sanding. Applied Sciences, 10, 8165. https://doi.org/10.3390/app10228165.
   Google Scholar
• Pertti, V., et al., 1997. Method for improving biodegradation resistance and dimensional stability of cellulosic products. US 5678324 A.
   Google Scholar
• Piernik, M., et al., 2019. The influence of the thermal modification of pine (Pinus sylvestris L.) wood on the creation of fine dust particles in plane milling: fine dust creation in the plane milling of thermally modified pine wood. Journal of Occupational Health, 61, 481–488. https://doi.org/10.1002/1348-9585.12075.
   PubMed Web of Science ®Google Scholar
• Ratnasingam, J., et al., 2011. Dust-generation characteristics of hardwoods during sanding processes. European Journal of Wood and Wood Products, 69, 127–131.
   Web of Science ®Google Scholar
• Rautio, S., et al., 2007. Modelling of airborne dust emissions in CNC MDF milling. Holz als Roh-und Werkstoff, 5, 335–341.
   Google Scholar
• Rikala, J., Havimo, M., and Sipi, M., 2009. Variation in strength properties of Scots pine wood after two different heat treatments. In: Proceedings of the 6 th meeting of the. Tallinn University of Technology Press, Tallinn, Estonia.
   Google Scholar
• Rogoziński, T., et al., 2021. Influence of drying mode and feed per tooth rate on the fine dust creation in pine and beech sawing on a mini sash gang saw. European Journal of Wood and Wood Products, 79, 91–99. https://doi.org/10.1007/s00107-020-01608-8.
   Web of Science ®Google Scholar
• Rončka, J., and Očkajová, A., 2007. The influence of sanding machine type and grit size on granularity of sanding wood dust. In: Presented at the Proceedings of the 2nd International Scientific Conference Woodworking Technique, Zalesina, Croatia, 11-15 September, 2007, Faculty of Forestry, University of Zagreb, 289–294.
   Google Scholar
• Santamaría-Herrera, A., Hoyuelos, F.J., and Casado-Marcos, C., 2023. Characterization of the explosiveness of wood dust. Process Safety and Environmental Protection, 169, 252–259. https://doi.org/10.1016/j.psep.2022.10.087.
   Web of Science ®Google Scholar
• Sydor, M., et al., 2021. Efficiency of machine sanding of wood. Applied Sciences, 11, 2860. https://doi.org/10.3390/app11062860.
   Google Scholar
• Taylor, J.B., Carrano, A.L., and Lemaster, R.L., 1999. Quantification of process parameters in a wood sanding operation. Forest Products Journal, 49, 41.
   Web of Science ®Google Scholar
• ThermoWood® Handbook. 2003. International thermowood association. Available from: https://thermalwoodcanada.com/images/PDF/Thermowood_handbook.pdf.
   Google Scholar
• Thorpe, A., and Brown, R.C., 1992. Factors influencing the production of dust during the sanding of wood. Journal of Aerosol Science, 23, 237–240. https://doi.org/10.1016/0021-8502(92)90393-A.
   Google Scholar
• Ugulino, B., and Hernández, R., 2017. Effect of cutting parameters on dust emission and surface roughness during helical planing red oak wood. Wood and Fiber Science, 49, 323–331.
   Web of Science ®Google Scholar
• Vlckova, M., Gejdos, M., and Nemec, M., 2017. Analysis of vibration in wood chipping process. Akustika, 28, 106–110.
   Google Scholar
• Welling, I., et al., 2008. Wood dust particle and mass concentrations and filtration efficiency in sanding of wood materials. Journal of Occupational and Environmental Hygiene, 6, 90–98. https://doi.org/10.1080/15459620802623073.
   Web of Science ®Google Scholar
• WHO, 1995. Wood dust and formaldehyde, IARC monographs on the evaluation of carcinogenic risks to humans. Lyon, UK: WHO. International Agency for Research on Cancer (IARC).
   Google Scholar
• Zheng, J., et al., 2006. Thermal conversion of rice husks and sawdust to liquid fuel. Waste Management, 26, 1430–1435. https://doi.org/10.1016/j.wasman.2005.10.011.
   PubMed Web of Science ®Google Scholar