3D-printed upper limb prostheses: a review

References

• Andrianesis K, Tzes A. Development and control of a multifunctional prosthetic hand with shape memory alloy actuators. J Intell Robot Syst 2014;78:257–289
   Web of Science ®Google Scholar
• Bahari MS, Jaffar A, Low CY, et al. Design and development of a multifingered prosthetic hand. Int J Soc Robot. 2012;4:59–66.
   Web of Science ®Google Scholar
• Laliberte T, Baril M, Guay F, et al. Towards the design of a prosthetic underactuated hand. Mech Sci. 2010;1:19–26.
   Web of Science ®Google Scholar
• Gretsch KF, Lather HD, Peddada KV, et al. Development of novel 3D-printed robotic prosthetic for transradial amputees. Prosthet Orthotics Int. 2015;40:400–403. 0309364615579317.
   PubMed Web of Science ®Google Scholar
• Groenewegen MWM. Design of a compliant, multi-phalanx underactuated prosthetic finger [Master Thesis]. Delft: Delft University of Technology; 2014.
   Google Scholar
• O’Neill C. An advanced, low cost prosthetic arm. In: SENSORS, 2014 IEEE. New York: IEEE; 2014.
   Google Scholar
• Simone F, York A, Seelecke S. Design and fabrication of a three-finger prosthetic hand using SMA muscle wires. In: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics; 2015.
   Google Scholar
• Enabling The Future [Online]. [cited 2015 Jun 19]. Available from: http://enablingthefuture.org/
   Google Scholar
• Robohand [Online]. [cited 2015 Jun 4]. Available from: http://www.robohand.net/wp-content/uploads/2013/03/2013-03-29-11-10-58-b.jpg
   Google Scholar
• Resnik L, Meucci MR, Lieberman-Klinger S, et al. Advanced upper limb prosthetic devices: implications for upper limb prosthetic rehabilitation. Arch Phys Med Rehabil. 2012;93:710–717.
   PubMed Web of Science ®Google Scholar
• van der Riet D, Stopforth R, Bright G, Diegel O. An overview and comparison of upper limb prosthetics. In: AFRICON, 2013. New York: IEEE; 2013.
   Google Scholar
• Campbell T, Williams C, Ivanova O, Garrett B. Could 3D printing change the world. In: Technologies, potential, and implications of additive manufacturing. Washington, DC: Atlantic Council; 2011.
   Google Scholar
• Doubrovski Z, Verlinden JC, Geraedts JMP. Optimal design for additive manufacturing: opportunities and challenges. In: ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers; 2011.
   Google Scholar
• Gibson I, Dongping S. Material properties and fabrication parameters in selective laser sintering process. Rapid Prototyping J. 1997;3:129–136.
   Web of Science ®Google Scholar
• Zhou JG, Herscovici D, Chen CC. Parametric process optimization to improve the accuracy of rapid prototyped stereolithography parts. Int J Mach Tools and Manufacture. 2000;40:363–379.
   Web of Science ®Google Scholar
• 3D-printed prosthesis Ecuador [Internet]. [cited 2015 Jun 25]. Available from: http://www.gizmag.com/3d-printed-prosthetic-hand/34615/
   Google Scholar
• Zuniga J. Adjustable Thumb [Internet]. [cited 2015 Jun 22]. Available from: http://www.cyborgbeast.org/devices/
   Google Scholar
• Biohand [Internet]. [cited 2015 Jun 30]. Available from: https://hackaday.io/post/19887
   Google Scholar
• Bionico hand [Internet]. [cited 2015 Jun 29]. Available from: http://bionico.org/about/
   Google Scholar
• Zuniga J. Cyborg Arm [Internet]. [cited 2015 Jun 22]. Available from: http://www.cyborgbeast.org/devices/
   Google Scholar
• Zuniga J. Cyborg Beast [Internet]; 2014 Mar 2. [cited 2015 Jun 22]. Available from: http://www.thingiverse.com/thing:261462
   Google Scholar
• Zuniga J. Cyborg Beast with Increased Wrist Movement [Internet]. [cited 2015 Jun 22]. Available from: http://www.cyborgbeast.org/devices/
   Google Scholar
• Open Bionics. Dextrus EMG [Internet]; 2014 Apr 2. [cited 2015 Jun 22]. Available from: http://www.thingiverse.com/thing:287638
   Google Scholar
• Patrick S. DIY Prosthetic Hand & Forearm [Internet]; 2013 Aug 16. [cited 2015 Jun 25]. Available from: http://www.instructables.com/id/Voice-Controlled-Prosthetic-Hand-Forearm/
   Google Scholar
• Estep B. Falcon Hand V1 [Internet]; 2014 Aug 5. [cited 2015 Jun 25]. Available from: http://www.thingiverse.com/thing:418398
   Google Scholar
• Arabian A. Falcon Hand V2 [Internet]; 2014 Dec 20. [cited 2015 Jun 27]. Available from: http://www.thingiverse.com/thing:603039
   Google Scholar
• Silva C. Flexy Arm [Internet]; 2014 Jun 23. Available from: http://www.thingiverse.com/thing:894705
   Google Scholar
• Wood S. Flexy-Hand [Internet]; 2014 Mar 4. [cited 2015 Jun 20]. Available from: http://www.thingiverse.com/thing:242639
   Google Scholar
• Wood S. Flexy-Hand 2 [Internet]; 2014 Jul 3. [cited 2015 Jun 20]. Available from: http://www.thingiverse.com/thing:380665
   Google Scholar
• Wood S. Flexy-Hand – Filaflex Remix [Internet]; 2014 Apr 10. [cited 2015 Jun 20]. Available from: http://www.thingiverse.com/thing:754513
   Google Scholar
• Dlacrur. GalileoHand [Internet]; 2015 Feb 12. [cited 2015 Jun 26]. Available from: http://www.thingiverse.com/thing:655432
   Google Scholar
• HACKberry [Internet]. [cited 2015 Jun 25]. Available from: http://exiii.jp/hackberry.html, https://github.com/exiii/HACKberry
   Google Scholar
• Handiii [Internet]. [cited 2015 Jun 25]. Available from: http://exiii.jp/handiii-eng.html
   Google Scholar
• Handiii COYOTE [Internet]. [cited 2015 Jun 25]. Available from: http://exiii.jp/coyote-eng.html
   Google Scholar
• Chappell C. Hollies Hand [Internet]; 2015 Feb 24. [cited 2015 Jun 28]. Available from: http://www.thingiverse.com/thing:696343
   Google Scholar
• Langevin G. InMoov 2 hand [Internet]; 2013 Jul 14. [cited 2015 Jun 28]. Available from: http://www.thingiverse.com/thing:118031
   Google Scholar
• Alec. IVIANA 2.0 [Internet]; 2014 Aug 27. [cited 2015 Jun 24]. Available from: http://tiny.cc/lz1b3x
   Google Scholar
• JD-1 [Internet]. [cited 2015 Jun 25]. Available from: http://tiny.cc/pyzd3x
   Google Scholar
• K-1 [Internet]. [cited 2015 Jun 24]. Available from: http://3dprint.com/72594/3d-systems-e-nable-k-1-hand/
   Google Scholar
• Latest Bionic arm [Internet]. [cited 2015 Jun 24]. Available from: http://www.openbionics.com/
   Google Scholar
• UCFArmory. Limbitless Arm [Internet]; 2014 Jul 29. [cited 2015 Jun 29]. Available from: http://www.thingiverse.com/thing:408641
   Google Scholar
• Manu Print (Re Hand) [Internet]. [cited 2015 Jun 24]. Available from: http://tinyurl.com/oeb2cd5
   Google Scholar
• Kirshna L. Mind Controlled Robotic Hand [Internet]; 2014 May 11. [cited 2015 Jun 26]. Available from: http://www.instructables.com/id/Mind-Controlled-Robotic-Arm/
   Google Scholar
• Mikey77. Muscle Robot Hand [Internet]; 2014 Apr 24. [cited 2015 Jun 26]. Available from: http://www.instructables.com/id/3d-Print-An-Artificial-Muscle-Robot-Hand/
   Google Scholar
• Not Impossible [Internet]. [cited 2015 Jun 24]. Available from: http://notimpossible.com/
   Google Scholar
• NuHand [Internet]. [cited 2015 Jun 29]. Available from: http://tiny.cc/5y2d3x
   Google Scholar
• Profbink. Odysseus Hand [Internet]; 2014 Mar 4. [cited 2015 Jun 29]. Available from: http://www.thingiverse.com/thing:262930
   Google Scholar
• Zuniga J. One-hinged Cyborg Beast [Internet]. [cited 2015 Jun 22]. Available from: http://www.cyborgbeast.org/devices/
   Google Scholar
• H, Dietz. Prosthetic/Robotic Hand Printable As An Assembled Unit Without Supports [Internet]; 2013 Oct 1. [cited 2015 Jun 29]. Available from: http://www.thingiverse.com/thing:158843
   Google Scholar
• Grunewald SJ. Prótesis Cosmética [Internet]; 2015 May 20. [cited 2015 Jun 27]. Available from: http://3dprint.com/66483/cocreate3d-stylish-prosthetics/
   Google Scholar
• E-Nable. Raptor Hand [Internet]; 2014 Sep 29. [cited 2015 Jun 22]. Available from: http://www.thingiverse.com/thing:476403
   Google Scholar
• E-Nable. Raptor Reloaded [Internet]; 2014 Dec 17. [cited 2015 Jun 22]. Available from: http://www.thingiverse.com/thing:596966
   Google Scholar
• E-Nable. RIT Arm [Internet]; 2014 Jul 30. [cited 2015 Jun 22]. Available from: https://www.youmagine.com/designs/rit-e-nable-arm-v0-43
   Google Scholar
• Roboarm (Unlimited tomorrow) [Internet]. [cited 2015 Jun 24]. Available from: http://theroboarm.com/
   Google Scholar
• Robohand. Robohand [Internet]; 2014 Apr 21. Available from: http://www.thingiverse.com/thing:305160
   Google Scholar
• Andrade M. Robot Hand [Internet]; 2013 Oct 26. [cited 2015 Jun 26]. Available from: http://www.thingiverse.com/thing:171898
   Google Scholar
• Allen S. Scand [Internet]. [cited 2015 Jun 26]; 2014 Jun 15. Available from: http://www.instructables.com/id/3D-Printing-Prosthetic-Hand-Make-it-Real-Challen/
   Google Scholar
• MakerBot. Snap-Together Robohand [Internet]; 2013 Jul 19. [cited 2015 Jun 22]. Available from: http://www.thingiverse.com/thing:92937
   Google Scholar
• Patrick S. Tact [Internet]; 2015 May 10. [cited 2015 Jun 25]. Available from: http://www.instructables.com/id/Tact-Low-cost-Advanced-Prosthetic-Hand/
   Google Scholar
• Profbink Talon Flextensor 1.0 [Internet]; 2014 Aug 1. [cited 2015 Jun 26]. Available from: http://www.thingiverse.com/thing:413983
   Google Scholar
• Profbink. Talon Hand 2.0 [Internet]; 2014 Jan 19. [cited 2015 Jun 26]. Available from: http://www.thingiverse.com/thing:229620
   Google Scholar
• Tenim Hand [Internet]. [cited 2015 Jun 29]. Available from: http://3dprint.com/73999/tenim-mechanical-hand/
   Google Scholar
• Thomas A. The Lucky Paw Prosthetic Hand [Internet]; 2014 Jun 24. [cited 2015 Jun 27]. Available from: http://www.thingiverse.com/thing:372727
   Google Scholar
• Victory Hand [Internet]. [cited 2015 Jun 25]. Available from: http://www.victoriahandproject.com/
   Google Scholar
• Youbionic [Internet]. [cited 2015 Jun 29]. Available from: www.youbionic.com/
   Google Scholar
• Zero Point Frontiers [Internet]. [cited 2015 Jun 24]. Available from: http://tiny.cc/miyd3x
   Google Scholar
• Zuniga J, Katsavelis D, Peck J, et al. Cyborg beast: a low-cost 3d-printed prosthetic hand for children with upper-limb differences. BMC Res Notes. 2015;8:10.
   PubMedGoogle Scholar
• Jones LA, Lederman SJ. Human hand function. New York: Oxford University Press, Inc.; 2006.
   Google Scholar
• Napier JR. The prehensile movements of the human hand. J Bone Joint Surg. 1956;38:902–913.
   Web of Science ®Google Scholar
• Weir RF, Sensinger JW. Design of artificial arms and hands for prosthetic applications. In: Standard Handbook of Biomedical Engineering and Design; 2003. p. 32-1.
   Google Scholar
• NinjaFlex: Flexible 3D-Printing with Strong Flexible Filament [Internet]. [cited 2015 Sep 14]. Available from: http://www.ninjaflex3d.com/
   Google Scholar
• Filament Filaflex [Internet]. [cited 2015 Sep 14]. Available from: http://recreus.com/en/4filaflex-filaments
   Google Scholar
• Plettenburg DH. Basic requirements for upper extremity prostheses: The Wilmer approach. In: Engineering in Medicine and Biology Society, 1998. Proceedings of the 20th Annual International Conference of the IEEE. Vol. 5. New York: IEEE; 1998.
   Google Scholar
• Biddiss E, Chau T. Upper-limb prosthetics: critical factors in device abandonment. Am J Phys Med Rehabil. 2007;86:977–987.
   PubMed Web of Science ®Google Scholar
• Gama Melo EN, Avilés Sánchez OF, Amaya Hurtado D. Anthropomorphic robotic hands: a review. In: Ingeniera Y Desarrollo. 2014. p. 279–313.
   Google Scholar
• Touch Bionics I-Limb Hand User Manual March 2010. [cited 2015 Jul 5]. Available from: http://www.touchbionics.com/docLibrary/US%20iLIMB%20user%20manual%20mar%202010.pdf
   Google Scholar
• Melendez D, LeBlanc M. Survey of arm amputees not wearing prostheses: implications for research and service. J Assoc Child Prosthetic Orthotic Clinic. 1988;23:62–69.
   Google Scholar
• Plettenburg DH. The Wilmer appealing prehensor. JPO: J Prosthet Orthotics. 2006;18:43–45.
   Google Scholar
• Smit G, Plettenburg DH. Comparison of mechanical properties of silicone and PVC (polyvinylchloride) cosmetic gloves for articulating hand prostheses. JRRD: J Rehabil Res Dev. 2013;50:723–732.
   PubMed Web of Science ®Google Scholar
• Chandler RF, Clauser CE, McConville JT, et al. (1975) Investigation of inertial properties of the human body. No. AMRL-TR-74-137. Air Force Aerospace Medical Research Lab, Wright–Patterson Afb, OH.
   Google Scholar
• Biddiss EA, Chau TT. Upper limb prosthesis use and abandonment: a survey of the last 25 years. Prosthet Orthotics Int. 2007;31:236–257.
   PubMed Web of Science ®Google Scholar
• Smit G, Plettenburg DH. Efficiency of voluntary closing hand and hook prostheses. Prosthet Orthotics Int. 2010;34:411–427.
   PubMed Web of Science ®Google Scholar
• Fishman S, Berger N. The choice of terminal devices. Artif Limbs. 1955;2:66–77.
   PubMedGoogle Scholar
• LeBlanc M. Patient Population and Other Estimates of Prosthetics and Orthotics in the USA. Orthot Prosthet; 1973;27:38–44.
   Google Scholar
• Kyberd PJ, Hill W. Survey of upper-extremity prosthesis users in Sweden and the United Kingdom. JPO: J Prosthet Orthotics. 2007;19:55–62.
   Google Scholar
• Smit G. Natural grasping, design and evaluation of a voluntary closing adaptive hand prosthesis [dissertion]. Delft: Delft University of Technology; 2013.
   Google Scholar
• Shima K, Tamura Y, Tsuji T, et al. Estimation of human finger tapping forces based on a fingerpad-stiffness model. In: Engineering in Medicine and Biology Society, 2009. EMBC 2009. Annual International Conference of the IEEE. New York: IEEE; 2009.
   Google Scholar
• Pandey R. Photopolymers in 3D printing applications [Thesis]. Helsinki: Arcada University of Applied Sciences; 2014.
   Google Scholar
• Photopolymer Jetting (PJ) [Internet]. [cited 2016 Jan 22]. Available from: https://www.additively.com/en/learn-about/photopolymer-jetting
   Google Scholar
• Wood S. How to 3D print with Flexible Filament [Internet]; 2014 Dec 10. [cited 2016 Jan 25]. Available from: http://www.gyrobot.co.uk/blog/how-to-3d-print-with-flexible-filaments
   Google Scholar
• Leapfrog Creatr HS 3D Printer [Internet]. [cited 2016 Apr 4]. Available from: http://www.leapfrog.com/en/creatr-hs
   Google Scholar
• Ultimaker Dual Extrusion [Internet]. [cited 2016 Apr 4]. Available from: http://wiki.ultimaker.com/Dual_Extrusion
   Google Scholar
• LN-4 Hand [Internet]. [cited 2016 Mar 19]. Available from: http://www.ln-4.org
   Google Scholar
• Enabling the Future: Media FAG. [Internet]. [cited 2016 Jan 24]. Available from: http://enablingthefuture.org/faqs/media-faq
   Google Scholar
• Floor JW. Getting a grip on the Ultimaker 2. Tensile strength of 3D printed PLA: a systematic investigation [dissertation]. TU Delft: Delft University of Technology; 2015.
   Google Scholar