249
Views
8
CrossRef citations to date
0
Altmetric
Original Articles

Reliability assessment of ultimate limit state of twin caverns

&
Pages 48-59 | Received 05 May 2014, Accepted 02 Mar 2016, Published online: 01 Apr 2016

References

  • Aksoy, C.O., Kantarci, O., and Ozacar, V., 2010. An example of estimating rock mass deformation around an underground opening using numerical modeling. International Journal of Rock Mechanics and Mining Sciences, 47 (2), 272–278. doi:10.1016/j.ijrmms.2009.12.001
  • Attoh-Okine, N.O., Cooger, K., and Mensah, S., 2009. Multivariate adaptive regression (MARS) and hinged hyperplanes (HHP) for doweled pavement performance modeling. Construction and Building Materials, 23, 3020–3023. doi:10.1016/j.conbuildmat.2009.04.010
  • Barla, G. and Ottoviani, M., 1974. Stresses and displacements around two adjacent circular openings near to the ground surface. In: International Society for Rock Mechanics, ed. Proceedings of the 3rd international congress on rock mechanics. Vol. II. Denver: National Academy of Sciences, 975–980.
  • Barton, N., et al., 1980. Application of the Q-system in design decisions. In: M. Bergman, ed. Subsurface space. Vol. 2. New York: Pergamon, 553–561.
  • Basarir, H., 2006. Engineering geological studies and tunnel support design at Sulakyurt dam site, Turkey. Engineering Geology, 86 (4), 225–237. doi:10.1016/j.enggeo.2006.05.003
  • Bieniawski, Z.T., 1978. Determining rock mass deformability: experience from case histories. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 15, 237–247. doi:10.1016/0148-9062(78)90956-7
  • Bieniawski, Z.T., 1989. Engineering rock mass classifications. New York: John Wiley and Sons.
  • Brinkgreve, R.B.J. and Bakker, H.L., 1991. Non-linear finite element analysis of safety factors. In: Beer, G., Booker, J.R. & Carter, J.P., eds. Proceedings of the 7th international conference on computer methods and advances in geomechanics, Cairns, AU: A.A. Balkema 1117–1122.
  • Esterhuizen, G.S., Dolinar, D.R., and Ellenberger, J.L., 2011. Pillar strength in underground stone mines in the United States. International Journal of Rock Mechanics and Mining Sciences, 48, 42–50. doi:10.1016/j.ijrmms.2010.06.003
  • Friedman, J.H., 1991. Multivariate adaptive regression splines. The Annals of Statistics, 19, 1–67. doi:10.1214/aos/1176347963
  • Gercek, H., 2005. Interaction between parallel underground openings. In: A. H. Okur & M. Tanriverdi, eds. Proceedings of the 19th international mining congress and fair of Turkey, IMCEV2005. Izmir, Turkey: Chamber of Mining Engineers of Turkey, 73–81.
  • Ghaboussi, J. and Ranken, R.E., 1977. Interaction between two parallel tunnels. International Journal for Numerical and Analytical Methods in Geomechanics, 1, 75–103. doi:10.1002/(ISSN)1096-9853
  • Goh, A.T.C., Xuan, F., and Zhang, W.G., 2013. Reliability assessment of diaphragm wall deflections in soft clays. In: James L. Withiam, Kok-Kwang Phoon, and Mohamad Hussein, eds. Foundation engineering in the face of uncertainty (GSP 229). San Diego: ASCE, 487–496.
  • Goh, A.T.C. and Zhang, W.G., 2012. Reliability assessment of stability of underground rock caverns. International Journal of Rock Mechanics and Mining Sciences, 55, 157–163. doi:10.1016/j.ijrmms.2012.07.012
  • Hammah, R.E., Yacoub, T., and Curran, J.H., 2007. Serviceability-based slope factor of safety using the shear strength reduction (SSR) method. In: Luís Ribeiro e Sousa, Claudio Olalla, N. Grossmann, eds. The second half century of rock mechanics 11th congress of the international society for rock mechanics. Leiden, The Netherlands: Taylor & Francis, 1137–1140.
  • Hastie, T., Tibshirani, R., and Friedman, J., 2009. The elements of statistical learning: data mining, inference and prediction. 2nd ed. New York: Springer.
  • Hoek, E. and Brown, E.T., 1997. Practical estimates of rock mass strength. International Journal of Rock Mechanics and Mining Sciences, 34 (8), 1165–1186. doi:10.1016/S1365-1609(97)80069-X
  • Hoek, E., Carranza-Torres, C.T., and Corkum, B., 2002. Hoek-Brown failure criterion-2002 edition. In: Hammah R, Bawden W, Curran J, Telesnicki M, eds. Proceedings of the 5th North American rock mechanics symposium. Vol. 1, Toronto: University of Toronto Press, 267–273.
  • Hoek, E. and Diederichs, M.S., 2006. Empirical estimation of rock mass modulus. International Journal of Rock Mechanics and Mining Sciences, 43, 203–215. doi:10.1016/j.ijrmms.2005.06.005
  • Jekabsons, G., 2010. VariReg: a software tool for regression modeling using various modeling methods. Riga Technical University. Available from: http://www.cs.rtu.lv/jekabsons/. [Accessed 05 January 2012].
  • Karademir, S.M., 2010. A parametric study on three dimensional modeling of parallel tunnel interactions. Thesis (PhD). Middle East Technical University, Ankara, Turkey.
  • Lashkari, A., 2013. Prediction of the shaft resistance of non-displacement piles in sand. International Journal for Numerical and Analytical Methods in Geomechanics, 37, 904–931. doi:10.1002/nag.v37.8
  • Mirzahosseinia, M., et al., 2011. Permanent deformation analysis of asphalt mixtures using soft computing techniques. Expert Systems with Applications, 38 (5), 6081–6100. doi:10.1016/j.eswa.2010.11.002
  • Mortazavi, A., Hassani, F.P., and Shabani, M., 2009. A numerical investigation of rock pillar failure mechanism in underground openings. Computers and Geotechnics, 36, 691–697. doi:10.1016/j.compgeo.2008.11.004
  • Palmstrom, A., 2000. On classification systems. In: International Society for Rock Mechanics, ed. Proceedings GeoEng2000. Melbourne: Lancaster, PA, US.
  • Samui, P., 2011. Determination of ultimate capacity of driven piles in cohesionless soil: a multivariate adaptive regression spline approach. International Journal for Numerical and Analytical Methods in Geomechanics, 36, 1434–1439. doi:10.1002/nag.1076
  • Samui, P. and Kurup, P., 2012. Multivariate adaptive regression spline and least square support vector machine for prediction of undrained shear strength of clay. International Journal of Applied Metaheuristic Computing, 3 (2), 33–42. doi:10.4018/IJAMC
  • Serafim, J.L. and Pereira, J.P., 1983. Considerations of the geomechanics classification of Bieniawski. In: Laboratório Nacional de Engenharia Civil (LNEC), ed. Proceedings of the international symposium on engineering geology and underground construction, Lisbon, A.A. Vol. 1. Rotterdam, The Netherlands: Balkema, 1133–1144.
  • Tuǧrul, A., 1998. The application of rock mass classification systems to underground excavation in weak limestone, Atatürk dam, Turkey. Turkey Engineering Geology, 50, 337–345. doi:10.1016/S0013-7952(98)00034-9
  • Vermeer, P.A., Ruse, N., and Marcher, T., 2002. Tunneling heading stability in drained ground. Felsbau, 20 (6), 8–18.
  • Zarnani, S., El-Emam, M., and Bathurst, R.J., 2011. Comparison of numerical and analytical solutions for reinforced soil wall shaking table tests. Geomechanics and Engineering, 3 (4), 291–321. doi:10.12989/gae.2011.3.4.291
  • Zhang, W.G. and Goh, A.T.C., 2012. Reliability assessment on ultimate and serviceability limit states and determination of critical factor of safety for underground rock caverns. Tunnelling and Underground Space Technology, 32, 221–230. doi:10.1016/j.tust.2012.07.002
  • Zhang, W.G. and Goh, A.T.C., 2013. Multivariate adaptive regression splines for analysis of geotechnical engineering systems. Computers and Geotechnics, 48, 82–95. doi:10.1016/j.compgeo.2012.09.016
  • Zhao, B.-Y. and Ma, Z.-Y., 2009. Influence of cavern spacing on the stability of large cavern groups in a hydraulic power station. International Journal of Rock Mechanics and Mining Sciences, 46, 506–513. doi:10.1016/j.ijrmms.2008.10.002
  • Zienkiewicz, O.C., Humpheson, C., and Lewis, R.W., 1975. Associated and non-associated visco-plasticity and plasticity in soil mechanics. Géotechnique, 25 (4), 671–689. doi:10.1680/geot.1975.25.4.671

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.