Pull-out behaviour of wood bolt fully grouted by PS-F slurry in rammed earth heritages

References

• Benmokrane, B., Zhang, B.R., and Adil, C., 2000. Tensile properties and pullout behaviour of AFRP and CFRP rods for grouted anchor applications. Construction and Building Materials, 14 (3), 157–170. doi:10.1016/S0950-0618(00)00017-9
   Web of Science ®Google Scholar
• Bui, Q.B., et al., 2009. Durability of rammed earth walls exposed for 20 years to natural weathering. Building and Environment, 44 (5), 912–919. doi:10.1016/j.buildenv.2008.07.001
   Web of Science ®Google Scholar
• Chang, Q.L., et al., 2013. Anchoring mechanism and application of hydraulic expansion bolts used in soft rock roadway floor heave control. International Journal of Mining Science and Technology, 23 (3), 323–328. doi:10.1016/j.ijmst.2013.05.017
   Google Scholar
• Chinese Engineering Construction Specification, 2005. CECS 20:2005. Technical specification for ground anchors. Beijing: China Plan Press.
   Google Scholar
• Chu, L.M. and Yin, J.H., 2006. Study on soil–cement grout interface shear strength of soil nailing by direct shear box testing method. Geomechanics and Geoengineering: An International Journal, 1 (1), 259–273. doi:10.1080/17486020601091742
   Google Scholar
• Deb, D. and Das, K.C., 2011. Enriched finite element procedures for analyzing decoupled bolts installed in rock mass. International Journal of Num and Analysis Methods in Geomech, 35 (15), 1636–1655. doi:10.1002/nag.970
   Web of Science ®Google Scholar
• Feilden and Bernard, M., 2003. Conservation of historic buildings. Oxford: Architectural Press.
   Google Scholar
• Freeman, T.J., 1978. The behavoir of fully grouted bolts in the Kielder experimental tunnel. Tunneling, 10, 37–40.
   Google Scholar
• Hamed, N. and Khairul, A.K., 2013. Pullout capacity of irregular shape anchor in sand. Measurement, 46 (10), 3876–3882. doi:10.1016/j.measurement.2013.07.042
   Web of Science ®Google Scholar
• Huang, K.Z., 1998. Conservation of heritage building of rock and soil. Beijing: Building Industry Press.
   Google Scholar
• Hyett, A.J., et al., 1995. A constitutive law for bond failure of fully grouted cable bolts using a modified hoek cell. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 32 (1), 11–36. doi:10.1016/0148-9062(94)00018-X
   Web of Science ®Google Scholar
• Hyett, A.J., Moosavi, M., and Bawden, W.F., 1996. Load distribution along fully grouted bolts with emphasis on cable bolt reinforcement. International Journal for Numerical and Analytical Methods in Geomechanics, 20 (7), 517–544. doi:10.1002/(ISSN)1096-9853
   Web of Science ®Google Scholar
• Ivanović, A. and Neilson, R.D., 2009. Modelling of debonding along the fixed anchor length. International Journal of Rock Mechanics & Mining Sciences, 46 (4), 699–707. doi:10.1016/j.ijrmms.2008.09.008
   Web of Science ®Google Scholar
• Kilic, A., Yasar, E., and Celik, A.G., 2002. Effect of grout properties on the pull-out load capacity of fully grouted rock bolt. Tunnelling and Underground Space Technology, 17 (4), 355–362. doi:10.1016/S0886-7798(02)00038-X
   Web of Science ®Google Scholar
• Laura, B.M., Michel, T., and Faouzi, H.H., 2011. A new analytical solution to the mechanical behaviour of fully grouted rockbolts subjected to pull-out tests. Construction and Building Materials, 25 (2), 749–755. doi:10.1016/j.conbuildmat.2010.07.011
   Web of Science ®Google Scholar
• Laura, B.M., et al., 2013. Assessment of the bolt-grout interface behaviour of fully grouted rockbolts from laboratory experiments under axial loads. International Journal of Rock Mechanics & Mining Sciences, 63 (5), 50–61. doi:10.1016/j.ijrmms.2013.06.007
   Web of Science ®Google Scholar
• Li, Z.X., 2010. Conservation of ancient sites along the silk road. Beijing: Science Press.
   Google Scholar
• Li, Z.X. and Wang, X.D., 1997. The new progress of protection and reinforcement for the ancient earthen architecture site. Dunhuang Research, 4, 167–172.
   Google Scholar
• Li, Z.X., Yang, T., and Chen, W.W., 2005. Mechanical and physical properties of PS-F grouting material. Dunhuang Research, 4, 40–50.
   Google Scholar
• Liang, R.Y. and Feng, Y., 2002. Development and application of anchor-soil interface models. Soils and Foudantions, 42 (2), 59–70. doi:10.3208/sandf.42.2_59
   Web of Science ®Google Scholar
• Park, H., et al., 2013a. A numerical study of the pullout behavior of grout anchors underreamed by pulse discharge technology. Computers and Geotechnics, 47 (1), 78–90. doi:10.1016/j.compgeo.2012.07.005
   Web of Science ®Google Scholar
• Park, J., Qiu, T., and Kim, Y., 2013b. Field and laboratory investigation of pullout resistance of steel anchors in Rock. Joural of Geotechical and Geoenvironmental Engineering, 139 (12), 2219–2224. doi:10.1061/(ASCE)GT.1943-5606.0000953
   Web of Science ®Google Scholar
• Paul, J., 2012. Influence of Arabic and Chinese rammed earth techniques in the Himalayan region. Sustainability, 4 (12), 2650–2660. doi:10.3390/su4102650
   Web of Science ®Google Scholar
• Pinchin, D.J. and Tabor, D., 1978. Interfacial phenomena in steel fiber reinforced cement II: pull-out behavior of steel wires. Cement and Concrete Research, 8 (2), 139–150. doi:10.1016/0008-8846(78)90002-9
   Web of Science ®Google Scholar
• State administration of cultural heritage, 2012. Guide to citing Internet sources [online]. Available from: http://www.sach.gov.cn/art/2012/6/7/art_722_107227.html[Accessed 11 November 2014].
   Google Scholar
• Sun, M.L., et al., 2006. Study on immatural earthen sites reinforced with wood anchor. Chinese Journal of Geotechnical Engineering, 28 (12), 2156–2159.
   Google Scholar
• Sun, M.L., Wang, X.D., and Li, Z.X., 2010. Issues concerning earthen sites in northwest China. Journal of Lanzhou University(Natural Sciences), 46 (6), 41–45.
   Google Scholar
• Wan, X.D., 2010. Philosophy and practice of conservation of earthen architecture sites: a case study of the Jiaohe ancient site in Xinjiang. Dunhuang Research, 6, 5–9.
   Google Scholar
• Yang, T., Li, Z.X., and Wang, X.D., 2009. Performance test of compatible slurry grouting into soil fracture at ancient city of Jiaohe. Chinese Journal of Rock Mechanics and Engineering, 28 (Supp. 2), 3783–3788.
   Google Scholar
• Windsor, C.R., 1997. Rock reinforcement systems. International Journal of Rock Mechanics and Mining Sciences, 34 (6), 919–951. doi:10.1016/S1365-1609(97)80004-4
   Web of Science ®Google Scholar
• Wu, Z.M., et al., 2010. Analytical solution for the pull-out response of FRP rods embedded in steel tubes filled with cement grout. Materials and Structures, 43 (5), 597–609. doi:10.1617/s11527-009-9515-x
   Web of Science ®Google Scholar
• Yang, M.J., Zhao, Y.M., and Zhang, N., 2014. Creep behavior of epoxy-bonded anchor system. International Journal of Rock Mechanics & Mining Sciences, 67 (2), 96–103. doi:10.1016/j.ijrmms.2014.02.001
   Web of Science ®Google Scholar
• Yang, S.T., et al., 2008. Theoretical analysis on pullout of anchor from anchor–mortar–concrete anchorage system. Engineering Fracture Mechanics, 75 (5), 961–985. doi:10.1016/j.engfracmech.2007.05.004
   Web of Science ®Google Scholar
• Zhang, J.K., et al., 2013. Field tests on anchorage mechanism of wood bolts for conservation of earthen sites. Chinese Journal of Geotechinical Engineering, 35 (6), 1166–1171.
   Google Scholar
• Zhang, R.-J., et al., 2012a. A method for predicting mechanical behaviour of HPJG–Anchors – Part I: mechanical characteristics and load transfer models. Computers and Geotechnics, 45 (45), 62–73. doi:10.1016/j.compgeo.2012.05.004
   Web of Science ®Google Scholar
• Zhang, R.-J., et al., 2012b. A method for predicting mechanical behaviour of HPJG-Anchors – Part II: prediction procedure, verifications and parametric studies. Computers and Geotechnics, 45, 44–52. doi:10.1016/j.compgeo.2012.05.005
   Web of Science ®Google Scholar
• Zhao, Y.M. and Yang, M.J., 2011. Pull-out behavior of an imperfectly bonded anchor system. International Journal of Rock Mechanics & Mining Sciences, 48 (3), 469–475. doi:10.1016/j.ijrmms.2010.09.011
   Web of Science ®Google Scholar