Numerical modelling of staged stope extraction in a tabular steeply dipping deposit

References

• Bamber, A., et al., 2004. Reducing Selectivity in Narrow-Vein Mining through the Integration of Underground Pre-Concentration. Canada: Canadian Institute of Mining, Metallurgy and Petroleum.
   Google Scholar
• Bewick, R.P. and Kaiser, P.K., 2009. Numerical assessment of factor B in Mathews’ method for open stope design. ROCKENG09. In: M. Diederichs and G. Grasselli, ed. Proceedings of the 3rd Canus Rock Mechanics Symposium. Toronto, Canada.
   Google Scholar
• Capes, G. W., Milne, D. M., and Grant, D. R. 2005. Stope hangingwall design approaches at the Xstrata Zinc, George Fisher Mine, North Queensland, Australia. In: Proceedings of ARMA Alaska Rocks 2005: Rock Mechanics for Energy, Mineral, and Infrastructure Development in the Northern Regions, June, University of Alaska-Anchorage, Alaska.
   Google Scholar
• Cepuritis, P.M., et al., 2010. Back Analysis of Over-break in a Longhole Open Stope Operation Using Non-linear Elasto-Plastic Numerical Modelling. Canada: American Rock Mechanics Association, 10–124.
   Google Scholar
• Clark, L.M. and Pakalnis, R.C., 1998. An Empirical Design Approach for Estimating Unplanned Dilution of Rock Mass Relaxation and Degradation into Empirical Stope Design. Vancouver, Canada: CIM-AGM.
   Google Scholar
• Doerner, C.A., 2005. Effect of delayed backfill on open stope mining methods. MSc. Thesis. Canada: University of British Columbia.
   Google Scholar
• Dorssen, P., et al., 2002. A long hole stoping system for mining narrow platinum reefs. The Journal of the South African Institute of Mining and Metallurgy, 102 (03), 151–154.
   Google Scholar
• Elbrond, J., 1994. Economic effects of ore losses and rock dilution. CIM Bulletin, 87 (978), 131–134.
   Google Scholar
• Golder Associates Ltd., 2005. Report on: Eagle project geotechnical study.
   Google Scholar
• Hall, B.E., 1987. Mining of Narrow Steeply Dipping Veins. Brisbane: AMC Consultants Pty Ltd.
   Google Scholar
• Henning, J.G., 2007. Evaluation of long-hole mine design influences on unplanned ore dilution. Thesis (PhD). Montreal, Quebec, Canada: McGill University.
   Google Scholar
• Hutchinson, D.J. and Diederichs, M., 1996. Cable Bolting in Underground Mines. Richmond: BiTech Publishers Ltd, 17. Ch. 2.
   Google Scholar
• Karim, R., et al., 2013. Stability analysis of paste fill as stope wall using analytical method and numerical modeling in the Kencana underground gold mining with long hole stope method. Procedia Earth and Planetary Science, 6, 474–484. doi:10.1016/j.proeps.2013.01.062
   Google Scholar
• Mathews, K.E., Hoek, D.C.W., and Stewart, S.B.V., 1980. Prediction of stable excavation Spans for mining at depths below 1000 metres in hard rock. Report to Canada Centre for Mining and Energy Technology.
   Google Scholar
• Mawdesley, C., Trueman, R., and Whiten, W.J., 2001. Extending the Mathews stability graph for open-stope design. Mining Technology, 110 (1), 27–39. doi:10.1179/mnt.2001.110.1.27
   Google Scholar
• Mitri, H.S. and Rajaie, H., 1992. Shear bond stress along cable bolts. In: Proceedings International Conference on Ground Control in Mining. Morgantown: CSM, 90–95.
   Google Scholar
• Nickson, S.D., 1992. Cable support guidelines for underground hard rock mine operations. M.A.Sc. Thesis. Canada: University of British Columbia.
   Google Scholar
• Planeta, S., Bourgoin, C., and Laflamme, M., 1990. The impact of rock dilution on underground mining: operational and financial considerations. In: Proceedings 92nd CIM Annual General Meeting. Ottawa, Ontario, Canada.
   Google Scholar
• Potvin, Y., 1988. Empirical open stope design in Canada. Doctoral Thesis. Canada: University of British Columbia. doi:10.3168/jds.S0022-0302(88)79586-7
   Google Scholar
• Potvin, Y. and Milne, D., 1992. Measurement of rock properties for mine design. In: J.A. Hudson, ed., Proceedings of the ISRM Symposium on Rock Characterization: Eurock’92, Chester, UK.London: Thomas Telford Services Ltd, 245–250.
   Google Scholar
• Potvin, Y., Hudyma, M., and Miller, H.D.S., 1989. Design guidelines for open stope support. CIM Bulletin, University of British Columbia (UBC), Canada, 53–62.
   Google Scholar
• Rocscience Inc. RS2, 2016. Rock and Soil 2-Dimensional Analysis Program. Toronto, Ontario, Canada.
   Google Scholar
• Stewart, P.C. and Trueman, R., 2008. Strategies for Minimising and Predicting Dilution in Tabular Mines – The Tabular Dilution Method. Dr. Simon Dominy, ed. Carlton, Victoria: Australian Institute. of Mining and Metallurgy.
   Google Scholar
• Suorineni, F.T., 1999. Effects of faults and stress on open stope design. Thesis (PhD). Canada: University of Waterloo.
   Google Scholar
• Suorineni, F.T., Kaiser, P.K., and Tannant, D.D., 2000. Unifying application of the stability graph for open stope design. CIM Bulletin, Montreal, Canada.
   Google Scholar
• Suorineni, F.T., Tannant, D.D., and Kaiser, P.K., 1999. Determination of fault related sloughage in open stopes. International Journal of Rock Mechanics and Mining Sciences, 36 (7), 891–906. doi:10.1016/S0148-9062(99)00055-8
   Web of Science ®Google Scholar
• Thorne, L.J. and Muller, D.S., 1964. Pre-Stressed Roof Support in Underground Engine Chambers at Free Geduld Mines Ltd. Trans. Assoc. Min. Mngr. Sth. Afr. 411–428.
   Google Scholar
• Trevor, S.M., 1991. Dilution control at Hudson Bay Mining & Smelting, Flin Fion Operations. In: Proceedings 93rd CIM Annual General Meeting. Vancouver, British Columbia, Canada.
   Google Scholar
• Villaescusa, E., 2004. Quantifying open stope performance. In: Proceedings of MassMin2004. Santiago, Chile, 96–104.
   Google Scholar