176
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

Model pile behavior in calibration chamber under very large number of cycles of axial loading in saturated clay

, , , &

References

  • H.G. Poulos (1981). Cyclic axial response of single pile. J. Geot. Eng. Div. Proceedings of the ASCE. 107, N°GT1 41–58.
  • C.Y Lee, H.G. Poulos (1990). Experimental investigations of axial capacity of model grouted piles in marine calcareous sediments. Univ. of Sydney, Sch. of Civil and Mining Eng. Research report N° R618.
  • H.G. Poulos (1989). Cyclic axial loading analysis of piles in sand. J. of Geot. Eng. 115, N°6, 836-852.
  • D. C. Procter, & J. H. Khaffaf, (1987). Cyclic axial displacement tests on model piles in clay. Getechnique 37, No. 4, 505–509.
  • P.Doherty, K. Gavin (2008). Degradation of axial shaft capacity of piles in soft clay due to cyclic loading. Internat. conf. on case histories in geotech. Engineering. Paper No. 9.04.
  • H.G. Poulos (1981). Some aspects of skin friction of piles in clay under cyclic loading. Geot. Eng. ASCE, 12, 1–17.
  • J. T. Chin, H.G. Poulos (1996). Tests on model jacked piles in calcareous sand. Geot. Test. J. 11, N° 2 164-180.https://doi.org/10.1520/GTJ10339J.
  • H. Bekki, J. Canou, B. Tali, J-C. Dupla, A. Bouafia (2013). Evolution of local friction along a model pile shaft in a calibration chamber for a large number of loading cycles. Comptes Rendus –Mecanique, 341, N°6 499–507.https://doi.org/10.1016/j.crme.2012.11.012
  • P. U. Kurup, G. Z. Voyiadjis, M. T. Tumay (1994). Calibration chamber studies of piezocone test in cohesive soils. Journal of Geotechnical Engineering. Vol. 120, N° 1. ASCE. 81-106.https://doi.org/10.1061/(ASCE)0733-9410(1995)121:5(454)
  • R.D. Muhammed (2015) Etude en chambre d’étalonnage du frottement sol-pieu sous grands nombres de cycles. Application au calcul des fondations profondes dans les sols fins saturés. Ph.D thesis. Pierre and Marie Curie University of Paris.
  • Gouda Geo-Equipment B.V. (2014). Manual of Electric CPT Cone S10CFIIP.
  • M.S.S. Almeida, and R.H.G. Parry (1985). Small cone penetrometer tests and piezocone tests in laboratory consolidated clays. Geotechnical Testing Journal, GTJODJ, Vol. 8, N°. 1, pp. 14–24. https://doi.org/10.1520/GTJ10852J
  • A. R. House, J. R. M. S. Oliveira and M. F. Randolph, (2001). Evaluating the coefficient of consolidation using penetration tests. Int. J. of Physical Modelling in Geotechnics, 13, pp. 17–25.
  • S. F. Chung, M. F. Randolph and J. A. Schneider (2006). Effect of penetration rate on penetrometer resistance in clay, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 132, No. 9, September 1, 2006https://doi.org/10.1061/(ASCE)1090-0241(2006)132:9(1188)
  • K. K. Kim and R. Salgado (2006). Interpretation of cone penetration tests in cohesive soils. Joint Transportation Research Project, FHWA/IN/JTRP-2006/22, SPR-2632. Purdue University West Lafayette, Indiana.
  • R.D. Muhammed, J. Canou, J.C. Dupla and A. Tabbagh (2018). Laboratory study of local clay-pile friction evolution for large numbers of cycles. In: Tran-Nguyen HH., Wong H., Ragueneau F., Ha-Minh C. (eds) Proceedings of the 4th Congrès International de Géotechnique - Ouvrages -Structures. CIGOS 2017. Lecture Notes in Civil Engineering, vol 8. Springer, Singapore. https://doi.org/10.1007/978-981-10-6713-6_74.
  • R.D. Muhammed, J. Canou, J.C. Dupla and H. Delmi (2016). Etude en chambre d’étalonnage du frottement sol-pieu dans une argile saturée sous grand nombre de cycles. JNGG 2016.
  • H. Bekki (2013). Évolution de la capacité portante des pieux isolés dans le sable sous chargement cyclique vertical à grand nombre de cycles - Modélisation physique en chambre d’étalonnage (in French), Ph.D thesis. Saad Dahlab University of Blida (Algeria).
  • B. Tali (2011). Comportement de l’interface sol-structure sous sollicitations cycliques. Application au calcul des fondations profondes. Ph.D thesis. Ecole Nationale des Ponts et Chaussées.
  • G. Voyiadjis, P. Kurup and M. Tumay (1993). Preparation of Large-Size Cohesive Specimens for Calibration Chamber Testing. Geotechnical Testing Journal, Vol.16, No.3, pp.339–349, https://doi.org/10.1520/GTJ10055J
  • A. Le Kouby, J. Canou, J.-C. Dupla, (2004). Behaviour of model piles subjected to cyclic loading, in: Proc. Int. Conf. on Cyclic Behaviour of Soils and Liquefaction Phenomena, Bochum, Germany. pp. 159–166.
  • D. Kim and M.T. Tumay (2007). Miniature Piezocone Penetration Test Results in Cohesive Soils. Jordan Journal of Civil Engineering, Vol.1 No.1, pp. 8–28.
  • H. Matlock, D. Bogard, and L. Cheang (1982). A Laboratory Study of axially Loaded Piles and Pile Groups Including Pore Pressure Measurements. Proceeding of the third International Conference on the Behavior of Offshore Structure (BOSS), No. 1,pp. 105–121.
  • H. G. Poulos. and C. Y. Lee (1988). Model tests on grouted piles in calcareous sediment. Engineering for Calcareous Sediments, Jewell and Andrews. Belkema, Rotterdam. Pp 255-260.
  • S. Feia (2015). Effet de l’injection d’eau de production sur la pérmeabilité des réservoirs pétroliers non cimentés. Ph.D thesis. Université Paris-Est.
  • S. Feia, J.C. Dupla, J. Canou, S.Ghabezloo, J. Sulem, B. Chabot, E. Aubry, and M. Mainguy, (2017). An experimental setup with radial injection for investigation of transport and deposition of suspended particles in porous media. Geotechnical Testing Journal, Vol. 40, No. 6, pp. 1115-1124, https://doi.org/10.1520/GTJ20160032. ISSN 0149-6115
  • J-C. Dupla (1995). Application de la sollicitation d’expansion de cavité cylindrique à l’évaluation des caractéristiques de liquéfaction d’un sable. Ph.D thesis. Ecole Nationale des Ponts et Chaussées, pp. 321–376.
  • A. Le Kouby (2003). Etude du comportement mécanique de micropieux sous chargements monotones et cycliques verticaux. Application aux effets de groupe. Ph.D thesis. Ecole Nationale des Ponts et Chaussées.
  • R. Francis (1997). Etude du comportement mécanique de micropieux modèles en chambre d’etalonnage. Application aux effets de groupe. Ph.D thesis. Ecole Nationale des Ponts et Chaussées
  • T. Le Thiet, (2005). Etude du processus de vibrofonçage d’inclusions cylindriques en chambre d’etalonnage. Application aux pieux. Ph.D thesis. Ecole Nationale des Ponts et Chaussées.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.