Bearing capacity of ring footing on weak sand layer overlying a dense sand deposit

References

• Al-Sanad, H.A., Ismael, N.F., and Brenner, R.P., 1993. Settlement of circular and ring plates in very dense calcareous sands. Journal of Geotechicnical Engineering, 119 (4), 622–638. doi:10.1061/(ASCE)0733-9410(1993)119:4(622)
   Web of Science ®Google Scholar
• Benmebarek, S., et al., 2012. Numerical evaluation of bearing capacity factor Nγ of ring footings. Computers and Geotechnics, 44, 132–138. doi:10.1016/j.compgeo.2012.04.004
   Web of Science ®Google Scholar
• Bolton, M.D., 1986. Strength and dilatancy of sands. Geotechnique, 36 (1), 65–78. doi:10.1680/geot.1986.36.1.65
   Web of Science ®Google Scholar
• Boushehrian, J.H. and Hataf, N., 2003. Experimental and numerical investigation of the bearing capacity of model circular and ring footings on reinforced sand. Geotextiles and Geomembranes, 21 (4), 241–256. doi:10.1016/S0266-1144(03)00029-3
   Web of Science ®Google Scholar
• Bowles, J.E., 1977. Foundation analysis and design. New York: McGraw- Hill.
   Google Scholar
• Cerato, A.B. and Lutenegger, A.J., 2007. Scale effects of shallow foundation bearing capacity on granular material. Journal of Geotechnical and Geoenvironmental Engineering, 133 (10), 1192–1202. doi:10.1061/(ASCE)1090-0241(2007)133:10(1192)
   Web of Science ®Google Scholar
• Chakraborty, D. and Kumar, J., 2013. Dependency of Nγ on footing diameter for circular footings. Soils and Foundations, 53 (1), 173–180. doi:10.1016/j.sandf.2012.12.013
   Web of Science ®Google Scholar
• de Beer, E.E., 1965. The scale effect on the phenomenon of progressive rupture in cohesionless soils. In: Soil Mechanics and Foundation Engineering Conference Proceedings. Canada. doi:10.1016/j.sandf.2012.12.013
   Google Scholar
• de Beer, E.E., 1970. Experimental determination of the shape factors and bearing capacity factors of sand. Geotechnique, 20 (4), 387–411. doi:10.1680/geot.1970.20.4.387
   Web of Science ®Google Scholar
• El Sawwaf, M. and Nazir, A., 2012. Behavior of eccentrically loaded small-scale ring footings resting on reinforced layered soil. Journal of Geotechnical and Geoenvironmental Engineering, 138, 376–384. doi:10.1061/(ASCE)GT.1943-5606.0000593
   Web of Science ®Google Scholar
• Farah, C.A., 2004. Ultimate bearing capacity of shallow foundations on layered soils. Thesis (M.Sc.). Civil and Environmental Engineering, Concordia Univ., Quebec.
   Google Scholar
• Hanna, A.M., 1981. Foundations on strong sand overlying weak sand. Journal of Geotechnical and Geoenvironmental Engineering, 107 (7), 915–927.
   Google Scholar
• Hanna, A.M., 1982. Bearing capacity of foundations on a weak sand layer overlying a strong deposit. Canadian Geotechnical Journal, 19 (3), 392–396. doi:10.1139/t82-043
   Web of Science ®Google Scholar
• Hanna, A.M., 1987. Finite element analysis of footings on layered soils. Mathematical Modelling, 9 (11), 813–819. doi:10.1016/0270-0255(87)90501-X
   Web of Science ®Google Scholar
• Hataf, N. and Razavi, M.R., 2003. Behavior of ring footing on sand. Iranian Journal of Science and Technology, 27 Transaction B, 47–56.
   Google Scholar
• Hettler, A. and Gudheus, G., 1988. Influence of the foundation width on the bearing capacity factor. Soils and Foundations, 28 (4), 81–92. doi:10.3208/sandf1972.28.4_81
   Google Scholar
• Keshavarz, A. and Kumar, J., 2017. Bearing capacity computation for a ring foundation using the stress characteristics method. Computers and Geotechnics, 89, 33–42. doi:10.1016/j.compgeo.2017.04.006
   Web of Science ®Google Scholar
• Khatri, V.N., Kumar, J., and Akhtar, S., 2017. Bearing capacity of foundations with inclusion of dense sand layer over loose sand strata. International Journal of Geomechanics, 17 (10), 06017018. doi:10.1061/(ASCE)GM.1943-5622.0000980
   Web of Science ®Google Scholar
• Krabbenhøft, K., Lyamin, A.V., and Sloan, S.W., 2007. Formulation and solution of some plasticity problems as conic programs. International Journal of Solids and Structures, 44 (5), 1533–1549.
   Web of Science ®Google Scholar
• Krabbenhøft, K., Lyamin, A.V., and Sloan, S.W., 2008. Three‐dimensional mohr–Coulomb limit analysis using semidefinite programming. Communications in Numerical Methods in Engineering, 24 (11), 1107–1119.
   Google Scholar
• Kumar, A., Ohri, M.L., and Bansal, R.K., 2007. Bearing capacity tests of strip footings on reinforced layered soil. Geotechnical and Geological Engineering, 25 (2), 139–150.
   Google Scholar
• Kumar, J. and Chakraborty, M., 2015. Bearing capacity factors for ring foundations. Journal of Geotechnical and Geoenvironmental Engineering, 141, 06015007. doi:10.1061/(ASCE)GT.1943-5606.0001345
   Web of Science ®Google Scholar
• Kumar, J. and Ghosh, P., 2005. Bearing capacity factor Nγ for ring footings using the method of characteristics. Canadian Geotechnical Journal, 42 (5), 1474–1484. doi:10.1139/t05-051
   Web of Science ®Google Scholar
• Kumar, J. and Khatri, V.N., 2008. Effect of footing width on bearing capacity factor Nγ for smooth strip footings. Journal of Geotechnical and Geoenvironmental Engineering, 134 (9), 1299–1310. doi:10.1061/(ASCE)1090-0241(2008)134:9(1299)
   Web of Science ®Google Scholar
• Kumar, J. and Khatri, V.N., 2011. Bearing capacity factors of circular foundations for a general c-ϕ soil using lower bound finite elements limit analysis. International Journal for Numerical and Analytical Methods in Geomechanics, 35 (3), 393–405, Wiley. doi:10.1002/nag.900
   Web of Science ®Google Scholar
• Kumar, J., and Mohapatra, D., 2017. Lower-bound finite elements limit analysis for Hoek-Brown materials using semidefinite programming. Journal of Engineering Mechanics, 143 (9), 04017077. doi:10.1061/(ASCE)EM.1943-7889.0001296
   Web of Science ®Google Scholar
• Lau, C.K. and Bolton, M.D., 2011. The bearing capacity of footings on granular soils. I: numerical analysis. Geotechnique, 61 (8), 627–638. doi:10.1680/geot.7.00206
   Web of Science ®Google Scholar
• Lyamin, A.V. and Sloan, S.W., 2002a. Lower bound limit analysis using non-linear programming. International Journal for Numerical Methods in Engineering, 55 (5), 573–611. doi:10.1002/nme.511
   Web of Science ®Google Scholar
• Lyamin, A.V. and Sloan, S.W., 2002b. Upper bound limit analysis using linear finite elements and non-linear programming. International Journal for Numerical and Analytical Methods in Geomechanics, 26 (2), 181–216. doi:10.1002/nag.198
   Web of Science ®Google Scholar
• Makrodimopoulos, A. and Martin, C.M., 2006. Lower bound limit analysis of cohesive frictional materials using second-order cone programming. International Journal for Numerical Methods in Engineering, 66 (4), 604–634. doi:10.1002/nme.1567
   Web of Science ®Google Scholar
• Makrodimopoulos, A. and Martin, C.M., 2007. Upper bound limit analysis using simplex strain elements and second-order cone programming. International Journal for Numerical and Analytical Methods in Geomechanics, 31 (6), 835–865. doi:10.1002/nag.567
   Web of Science ®Google Scholar
• Martin, C.M., 2005. Exact bearing capacity calculations using the method of characteristics. In: Proceedings of 11th conference of IACMAG, 4, International Association for Computer Methods and Advances in Geomechanics Settlement of circular and ring plates in very dense calcareous sands, 441–450.
   Google Scholar
• Meyerhof, G.G. and Hanna, A.M., 1978. Ultimate bearing capacity of foundations on layered soils under inclined load. Canadian Geotechnical Journal, 15 (4), 565–572. doi:10.1139/t78-060
   Web of Science ®Google Scholar
• Muhs, H., 1965. Discussion on: the scale effect on the phenomenon of progressive rupture in cohesionless soils by de Beer EE. In: Proceedings of 6th ICSMFE. Montreal, 2, 13–17. In Proceedings 6th ICSMFE, Montreal, 3, 419–421.
   Google Scholar
• Ohri, M., Purhit, D., and Dubey, M., 1997. Behavior of ring footing on dune sand over-laying dense sand. In: Proceedings of International Conference on Civil Engineering, Tehran, Iran, 22–24.
   Google Scholar
• Optum G2, 2017 [Computer software], Optum computational engineering. Copenhagen, Denmark.
   Google Scholar
• Saha, M.C., 1978. Ultimate bearing capacity of ring footings on sand. Thesis (M.Eng.). Univ. of Roorkee, Roorkee, India.
   Google Scholar
• Saran, S., Bhandari, N.M., and Al-Smadi, M.M.A., 2003. Analysis of eccentrically obliquely loaded ring footings on sand. Indian Geotechnical Journal, 33 (4), 422–446.
   Google Scholar
• Sargazi, O. and Hosseininia, E.S., 2017. Bearing capacity of ring footings on cohesionless soil under eccentric load. Computers and Geotechnics, 92, 169–178. doi:10.1016/j.compgeo.2017.08.003
   Web of Science ®Google Scholar
• Sloan, S.W., 1988. Lower bound limit analysis using finite elements and linear programming. International Journal for Numerical and Analytical Methods in Geomechanics, 12 (1), 61–77. doi:10.1002/(ISSN)1096-9853
   Web of Science ®Google Scholar
• Sloan, S.W. and Kleeman, P.W., 1995. Upper bound limit analysis using discontinuous velocity fields. Computer Methods in Applied Mechanics and Engineering, 127 (1), 293–314. doi:10.1016/0045-7825(95)008681
   Web of Science ®Google Scholar
• Valore, C., Ziccarelli, M., and Muscolino, S.R., 2017. The bearing capacity of footings on sand with a weak layer. Geotechnical Research, 4 (1), 12–29. doi:10.1680/jgere.16.00020
   Web of Science ®Google Scholar
• White, D.J., et al., 2008. A comparison of the bearing capacity of flat and conical circular foundations on sand. Geotechnique, 58, 781–792. doi:10.1680/geot.2008.3781
   Web of Science ®Google Scholar
• Yamaguchi, H., Kimura, T., and Fuji-i, N., 1976. On the influence of progressive failure on the bearing capacity of shallow foundations in dense sand. Soils and Foundations, 16 (4), 11–22. doi:10.3208/sandf1972.16.4_11
   Google Scholar
• Ziccarelli, M., et al., 2017. Centrifuge tests on strip footings on sand with a weak layer. Geotechnical Research, 4 (1), 47–64. doi:10.1680/jgere.16.00021
   Web of Science ®Google Scholar