Stress state analysis in the vicinity of the hydraulic fracturing tool located near the bottom of the well

References

• Azarov, A.V., et al., 2015. Mathematical modeling of stress state of surrounding rocks around the well subjected to shearing and normal load in hydraulic fracturing zone. Journal of Mining Science, 51 (6), 1063–1069. doi:https://doi.org/10.1134/S1062739115060296
   Web of Science ®Google Scholar
• Bradford, J., et al., 2017. Analysis of the thermal and hydraulic stimulation program at Raft River, Idaho. Rock Mechanics and Rock Engineering, 50 (5), 1279–1287. doi:https://doi.org/10.1007/s00603-016-1156-0
   Web of Science ®Google Scholar
• Fan, J., et al., 2012. Directional hydraulic fracturing to control hard-roof rockburst in coal mines. International Journal of Mining Science and Technology, 22 (2), 177–181. doi:https://doi.org/10.1016/j.ijmst.2011.08.007
   Google Scholar
• Fu, J.H., et al., 2017. Coal mine hydraulic fracturing underground drainage research and engineering application. Applied Mechanics and Materials, 863, 334–341.
   Google Scholar
• Huang, B. and Wang, Y., 2016. Roof weakening of hydraulic fracturing for control of hanging roof in the face end of high gassy coal longwall mining: a case study. Archives of Mining Sciences, 61 (3), 601–615. doi:https://doi.org/10.1515/amsc-2016-0043
   Web of Science ®Google Scholar
• Kang, H., et al., 2010. In-situ stress measurements and stress distribution characteristics in underground coal mines in China. Engineering Geology, 116, 333–345. doi:https://doi.org/10.1016/j.enggeo.2010.09.015
   Web of Science ®Google Scholar
• Kehle, R.O., 1964. The determination of tectonic stresses through analysis of hydraulic well fracturing. Journal of Geophysical Research, 69 (2), 259–273. doi:https://doi.org/10.1029/JZ069i002p00259
   Google Scholar
• Kurlenya, M.V., et al., 2014. Sealing of coal bed methane drainage holes by barrier screening method. Journal of Mining Science, 50 (4), 814–818. doi:https://doi.org/10.1134/S106273911404022X
   Web of Science ®Google Scholar
• Lekontsev, Y.M. and Sazhin, P.V., 2014. Directional hydraulic fracturing in difficult caving roof control and coal degassing. Journal of Mining Science, 50 (5), 914–917. doi:https://doi.org/10.1134/S106273911405010X
   Web of Science ®Google Scholar
• Leont’ev, A.V., Makarov, A.B., and Tarasov, A.Y., 2013. In situ stress state assessment in the Nurkazgan mine. Journal of Mining Science, 49 (4), 550–556. doi:https://doi.org/10.1134/S1062739149040047
   Web of Science ®Google Scholar
• Li, X., Tan, C.P., and Roegiers, J.C., 1997. Effects of packer on hydraulic fractures initiated from highly-deviated and horizontal boreholes. International Journal of Rock Mechanics and Mining Sciences, 34 (3–4), 260.e1–260.e21.
   Google Scholar
• Liu, Y., Xia, B., and Liu, X., 2015. A novel method of orienting hydraulic fractures in coal mines and its mechanism of intensified conduction. Journal of Natural Gas Science and Engineering, 27, 190–199. doi:https://doi.org/10.1016/j.jngse.2015.08.054
   Web of Science ®Google Scholar
• Mills, K., et al., 2006. Developing methods for placing sand-propped hydraulic fractures for gas drainage in the Bulli seam. In Proceedings of the coal operators’ conference. Wollongong: University of Wollongong, 190–199. doi:https://doi.org/10.1093/ije/dyi281
   Google Scholar
• Moschovidis, Z. and Steiger, R.P., 2000. The Mounds drill-cuttings injection experiment: final results and conclusions. In Proceedings of the IADC/SPE drilling conference. New Orleans, Paper SPE-59115.
   Google Scholar
• Papanastasiou, P., Papamichos, E., and Atkinson, C., 2016. On the risk of hydraulic fracturing in CO2 geological storage. International Journal for Numerical and Analytical Methods in Geomechanics, 40 (10), 1472–1484. doi:https://doi.org/10.1002/nag.v40.10
   Web of Science ®Google Scholar
• Patutin, A. and Serdyukov, S., 2017. Transverse hydraulic fracture initiation by indentation in an uncased borehole. Procedia Engineering, 191, 287–290. doi:https://doi.org/10.1016/j.proeng.2017.05.183
   Google Scholar
• Roegiers, J.C., Kudo, O., and Fairhurst, C., 1973. Influence of the type of packer on the stress distribution around a borehole and the resulting fracture orientation. Journal of the Japanese Association for Petroleum Technology, 38 (4), 209–222. doi:https://doi.org/10.3720/japt.38.209
   Google Scholar
• Rogala, A., et al., 2014. Carbon dioxide sequestration during shale gas recovery. Physicochemical Problems of Mineral Processing, 50 (2), 681–692.
   Web of Science ®Google Scholar
• Schlüter, R. and Mischo, H., 2015. In-situ underground bioleaching – novel conditioning technologies. In proceedings of the 2015 SME annual meeting and conference. Denver, 299–303.
   Google Scholar
• Shilova, T.V. and Serdyukov, S.V., 2015. Protection of operating degassing holes from air inflow from underground excavations. Journal of Mining Science, 51 (5), 1049–1055. doi:https://doi.org/10.1134/S1062739115040272
   Web of Science ®Google Scholar
• Singh, I. and Miskimins, J.L., 2010. A numerical study of the effects of packer-induced stresses and stress shadowing on fracture initiation and stimulation of horizontal wells. In Canadian unconventional resources and international petroleum conference. Calgary, Paper SPE-136856.
   Google Scholar
• Tratner, C.J., 1946. On the elastic distortion of a cylindrical hole by a localized hydrostatic pressure. Quarterly of Applied Mathematics, 43, 298–302.
   Google Scholar
• Wang, Z.C., et al., 2014. Research on experimental method for the working force between packer rubber and casing tube. Applied Mechanics and Materials, 518, 138–143.
   Google Scholar
• Warren, W.E., 1981. Packer-induced stresses during hydraulic well fracturing. Journal of Energy Resources Technology, 103 (4), 336–343. doi:https://doi.org/10.1115/1.3230863
   Web of Science ®Google Scholar
• Weng, X., Settari, A., and Keck, R.C., 1997. A field demonstration of hydraulic fracturing for solids waste disposal – injection pressure analysis. International Journal of Rock Mechanics and Mining Sciences, 34 (3–4), 331.e1–331.e17.
   Google Scholar
• Will, J., Eckardt, S., and Ranjan, A., 2017. Numerical simulation of hydraulic fracturing process in an enhanced geothermal reservoir using a continuum homogenized approach. Procedia Engineering, 191, 821–828. doi:https://doi.org/10.1016/j.proeng.2017.05.249
   Google Scholar
• Yin, L.J., et al., 2014. Use of indentation tests to study the influence of confining stress on rock fragmentation by a TBM cutter. International Journal of Rock Mechanics and Mining Sciences, 72, 261–276. doi:https://doi.org/10.1016/j.ijrmms.2014.07.022
   Web of Science ®Google Scholar
• Zeng, Z.W. and Roegiers, J.C., 2001. Modeling of packer influence on hydraulic fracture initiation in laboratory tests. In Proceedings of the 38th US symposium on rock mechanics. Washington, Paper ARMA-01-0221.
   Google Scholar