234
Views
8
CrossRef citations to date
0
Altmetric
Original Articles

Investigation of rock slope stability under pore-water pressure and structural anisotropy by the discrete element method

, ORCID Icon, ORCID Icon &
Pages 452-464 | Received 23 Feb 2019, Accepted 11 Oct 2019, Published online: 24 Oct 2019

References

  • Bonilla–Sierra, V., et al., 2015. DEM analysis of rock bridges and the contribution to rock slope stability in the case of translational sliding failures. International Journal of Rock Mechanics and Mining Sciences, 80, 67–78. doi:10.1016/j.ijrmms.2015.09.008
  • Chen, S., et al., 2018. Three-dimensional numerical investigation of coupled flow-stress-damage failure process in heterogeneous poroelastic rocks. Energies, 11 (8), 1923. pp. 1–16. doi:10.3390/en11081923
  • Cundall, P.A., 1971. A computer model for simulating progressive large scale movements in blocky rock systems. In: Proceedings of the Symposium of the International Society for Rock Mechanics, Society for Rock Mechanics (ISRM). Nancy, France, paper no. II-8.
  • Cundall, P.A., 1980. UDEC - a generalized distinct element program for modelling jointed rock, Peter Cundall Associates, Report PCAR-1-80. European Research Office, U.S. Army, Contract DAJA 37-79-C-0548.
  • Cundall, P.A., 1982. Adaptive density-scaling for time-explicit calculations. In: Proceedings of the 4th international conference on numerical methods in geomechanics, Edmonton, Alberta, v. 1, 23–26.
  • Cundall, P.A., 1988. Formulation of a three-dimensional distinct element model—part I. A scheme to detect and represent contacts in a system composed of many polyhedral blocks. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 25 (3), 107–116. doi:10.1016/0148-9062(88)92293-0
  • Dong, -J.-J., et al., 2006. Effects of anisotropic permeability on stabilization and pore water pressure distribution of poorly cemented stratified rock slopes. International Journal for Numerical and Analytical Methods in Geomechanics, 30(15), 1579–1600. doi:10.1002/nag.549
  • Harrison, J.P. and Hudson, J.A., 2000. Part 2: Illustrative worked examples. In: Engineering Rock Mechanics, Pergamon, Oxford.
  • Hart, R.D., 1993. An introduction to distinct element modeling for rock engineering. In: C. Fairhurst, ed. Analysis and design methods - principles, practice and projects, Chapter 10. Pergamon, 245–261. doi:10.1016/B978-0-08-040615-2.50016-2
  • He, L., et al., 2018. Rock slope stability and stabilization analysis using the coupled DDA and FEM method: NDDA approach. International Journal of Geomechanics (ASCE), 18 (6), 0401804. pp. 1–15. doi:10.1061/(ASCE)GM.1943-5622.0001098
  • Hosseinitoudeshki, V. and Kayalha, A., 2014. The effect of pore pressure on the rock slope stability. Journal of Novel Applied Sciences, 3 (5), 547–550. Available from:http://jnasci.org/wp-content/uploads/2014/05/547-550.pdf
  • Itasca Consulting Group Inc, 2004. Manual of Universal Distinct Element Code (UDEC). Minneapolis, MN. Available from: https://www.itascacg.com/software/udec
  • Lemos, J.V., Hart, R.D., and Cundall, P.A., 1985. A generalized distinct element program for modelling jointed rock mass. In: International symposium on fundamentals of rock Joints, Bjorklidenm, Sweden, 335–343.
  • Li, Y., et al., 2018. Numerical investigations on stability evaluation of a jointed rock slope during excavation using an optimized DDARF method. Geomechanics and Engineering, 14 (3), 271–281. doi:10.12989/gae.2018.14.3.271
  • Li, Z.W. and Yang, X., 2018. Stability of 3D slope under steady unsaturated flow condition. Engineering Geology, 242, 150–159. doi:10.1016/j.enggeo.2018.06.004
  • Lin, J.S. and Whitman, R.V., 1983. Decoupling approximation to the evaluation of earthquake-induced plastic slip in earth dams. Earthquake Engineering and Structural Dynamics, 11 (5), 667–678. doi:10.1002/eqe.4290110506
  • Maleki Javan, M.R., Kilanehei, F., and Mahjoob, A., 2015. Rock slope stability analysis using discrete element method. International Journal of Transportation Engineering, 2 (3), 199–212.
  • Morris, J., Glenn, L., and Blair, S., 2003. The distinct element method — application to structures in jointed rock. In: M. Griebel and M.A. Schweitzer, eds. Meshfree methods for partial differential equations, lecture notes in computational science and engineering. Vol. 26, Berlin, Heidelberg: Springer. 291–306. doi:10.1007/978-3-642-56103-0_20
  • Newmark, N.M., 1965. Effects of earthquakes on dams and embankments. Géotechnique, 15 (2), 139–160. doi:10.1680/geot.1965.15.2.139
  • Pal, S., et al., 2012. Earthquake stability analysis of rock slopes: a case study. Rock Mechanics and Rock Engineering, 45 (2), 205–215. doi:10.1007/s00603-011-0145-6
  • Samanta, S.K., Majumdar, R.K., and Chowdhury, S., 2015. Modes of slope failure in layered rocks of landslide zones: insight from finite element modelling. Indian Journal of Geosciences, 69 (2), 117–130.
  • Shen, H. and Abbas, S.M., 2013. Rock slope reliability analysis based on distinct element method and random set theory. International Journal of Rock Mechanics and Mining Sciences, 61, 5–22. doi:10.1016/j.ijrmms.2013.02.003
  • Stead, D., et al., 2001. Advanced numerical techniques in rock slope stability analysis—applications and limitations. In: International conference on landslides - causes, impacts and countermeasures, 17–21 June, Davos, Switzerland, 615–624.
  • Zheng, L., et al., 2018. Effect of colluvial soil slope fracture’s anisotropy characteristics on rainwater infiltration process. Advances in Civil Engineering, 7351628, 1–11. doi:10.1155/2018/7351628

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.