References
- Anbazhagan, P., Manohar, D.R., and Rohit, D., 2017. Influence of size of granulated rubber and tyre chips on the shear strenght characteristics of sand-rubber mix. Geomechanics and Geoengineering: an International Journal, 12 (4), 266–278. doi:https://doi.org/10.1080/17486025.2016.1222454
- ASTM D 3080/3080M-11, 2012. Direct shear test of soils under consolidated drained conditions. ASTM International. doi:https://doi.org/10.1520/D3080_D3080M-11
- ASTM D 6270-17, 2018. Standard practice for use of scrap tires in civil engineering application. ASTM International. doi:https://doi.org/10.1520/D6270-17
- Attom, M.F., 2006. The use of shredded waste tires to improve the geotechnical engineering properties of sands. Journal of Environmental Geology, 49 (4), 497–503. doi:https://doi.org/10.1007/s00254-005-0003-5
- Cabalar, A.F., 2011. Direct shear tests on waste tires-sand mixtures. Geotechnical and Geological Engineering, 29 (4), 411–418. doi:https://doi.org/10.1007/s10706-010-9386-5
- Cetin, H., Fener, M., and Gunaydın, O., 2006. Geotechnical properties of tire-cohesive clayey soil mixtures as a fill material. Engineering Geology, 88 (1), 110–120. doi:https://doi.org/10.1016/j.enggeo.2006.09.002
- CSN CEN ISO/TS 17892-10, 2005. Geotechnicky pruzkum a zkouseni – Laboratorni zkousky zemin Cast 10: Krabicova smykova zkouska.
- Edincliler, A., Baykal, G., and Saygılı, A., 2010. Influence of different processing techniques on the mechanical properties of used tires in embankment construction. Waste Management, 30 (6), 1073–1080. doi:https://doi.org/10.1016/j.wasman.2009.09.031
- Edincliler, A., et al., 2012. Triaxial compression behavior of sand and tire wastes using neural networks. Neural Computing and Applications, 21 (21), 441–452. doi:https://doi.org/10.1007/s00521-010-0430-4
- El-Sherbiny, R., Youssef, A., and Lotfy, H. 2013. Triaxial testing on saturated mixtures of sand and granulated rubber. Proceedings of Geo-Congress 2013, ASCE, San Diego, California, USA, 82–91. doi:https://doi.org/10.1177/1753193412453424
- ETRMA, 2015. ELT management figures, European tyre and rubber manufacturers’ association.
- Foose, G.J., Benson, C.H., and Bosscher, P.J., 1996. Sand reinforced with shredded waste tires. Journal of Geotechnical Engineering, 122 (9), 760–767. doi:https://doi.org/10.1061/(ASCE)0733-9410(1996)122:9(760)
- Ghazavi, M. and Sakhi, M.A., 2005. Influence of optimized tire shreds on shear strength parameters of sand. International Journal of Geomechanics, 5 (1), 58–65. doi:https://doi.org/10.1061/(ASCE)1532-3641(2005)5:1(58)
- Gotteland, P., Lambert, S., and Balachowski, L., 2005. Strength characteristics of tyre chips-sand mixtures. Studia Geotechnica Et Mechanica, 27 (1), 55–66.
- Humphrey, D.N., 1996. Investigation of ecothermic reaction in tire shred fill located SR 100 in Ilwaco, Washington. Report to the Federal Highway Administration, Washington, DC.
- Kim, H.K. and Santamarina, J.C., 2008. Sand-rubber mixtures (large rubber chips). Canadian Geotechnical Journal, 45 (10), 1457–1466. doi:https://doi.org/10.1139/T08-070
- Kyser, D. and Ravichandran, N., 2016. Properties of chipped rubber roofing membrane and sand mixtures for civil engineering applications. Journal of Building Engineering, 7, 103–113. doi:https://doi.org/10.1016/j.jobe.2016.05.008
- Lee, C., Shin, H., and Lee, J.S., 2014. Behavior of sand-rubber particle mixtures: experimental observations and numerical simulations. International Journal for Numerical and Analytical Methods in Geomechanics, 38 (16), 1651–1663. doi:https://doi.org/10.1002/nag.2264
- Marto, A., et al., 2013. Shear properties of sand-tire chips mixtures. Electronic Journal of Geotechnical Engineering, 18 (2), 325–334.
- Mashiri, M.S., et al., 2015. Shear strength and dilatancy behaviour of sand-tyre chip mixtures. Soils and Foundations, 55 (3), 517–528. doi:https://doi.org/10.1016/j.sandf.2015.04.004
- Mohamad, E.T., et al., 2013. Effects of relative density on shear strength characteristics of sand tire chips mixture. Electronic Journal of Geotechnical Engineering, 18 (4), 623–632.
- Noorzad, R. and Raveshi, M., 2017. Mechanical behaviour of waste tire crumbs-sand mixtures determined by triaxial tests. Geotechnical and Geological Engineering, 35 (4), 1793–1802. doi:https://doi.org/10.1007/s10706-017-0209-9
- Raghavan, D., Huyng, H., and Ferraris, C.F., 1998. Workability, mechanical properties, chemical stability of a recycled tyre rubber-filled cementitious composite. Journal of Materials Science, 33 (7), 1745–1752. doi:https://doi.org/10.1023/A:1004372414475
- Rao, G.V. and Dutta, R.K., 2006. Compressibility and strength behaviour of sand-tyre chip mixtures. Geotechnical and Geological Engineering, 24 (3), 711–724. doi:https://doi.org/10.1007/s10706-004-4006-x
- Reddy, S.B. and Krishna, A.M., 2015. Recycled tire chips mixed with sand as lightweight backfill material in retaining wall applications: an experimental investigation. International Journal of Geosynthetics and Ground Engineering., 31 (1), 1–11. doi:https://doi.org/10.1007/s40891-015-0036-0
- Reddy, S.B. and Krishna, A.M., 2017. Tyre chips as compressible inclusions in earth-retaining walls. ICE, Ground Improvement, 170 (3), 137–148. doi:https://doi.org/10.1680/jgrim.16.00034
- Reddy, S.B., Kumar, D.P., and Krishna, A.M., 2016. Evaluation of the optimum mixing ratio of a sand-tire chips mixture for geoengineering applications. Journal of Materials in Civil Engineering, 28 (2). doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0001335
- Saberian, M., et al., 2018. Experimental and phenomenological study of the effects of adding shredded tire chips on geotechnical properties of peat. International Journal of Geotechnical Engineering, 12 (4), 347–356. doi:https://doi.org/10.1080/19386362.2016.1277829
- Saberian, M. and Rahgozar, M.A., 2016. Geotechnical properties of peat soil stabilized with shredded waste tyre chips in combination with gypsum, lime or cement. Mires and Peat, 18 (1), 1–16. doi:https://doi.org/10.19189/MaP.2015.OMB.211
- Sheikh, M.N., et al., 2013. Shear and compressibility behavior of sand-tire crumb mixtures. Journal of Materials in Civil Engineering, 25 (10), 1366–1374. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0000696
- Singh, B. and Vinot, V., 2011. Influence of waste tire chips on strength characteristics of soils. Journal of Civil Engineering and Architecture, 5 (9), 819–827. doi:https://doi.org/10.17265/1934-7359/2011.09.007
- Srivastava, A., Pandey, S., and Rana, J., 2014. Use of shredded tyre waste in improving the geotechnical properties of expansive black cotton soil. Geomechanics and Geoengineering, 9 (4), 303–311. doi:https://doi.org/10.1080/17486025.2014.902121
- Tajdini, M., et al., 2017. Effect of added waste rubber on the properties and failure mode of kaolinite clay. International Journal of Civil Engineering, 15 (6), 949–958. doi:https://doi.org/10.1007/s40999-016-0057-7
- Tiwari, B., et al. 2014. Improving geotechnical behavior of clayey soils with shredded rubber tires-preliminary study. Proceedings of Geo-Congress 2014 Technical Papers ASCE, Atlanta, Georgia, USA, 3734–3743.
- Xiao, M., Ledezma, M., and Hartman, C., 2015. Shear resistance of tire-derived aggregate using large-scale direct shear tests. Journal of Materials in Civil Engineering, 27 (1), 1–8. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0001007
- Zornberg, J.G., Cabral, A.R., and Viratjandr, C., 2004. Behaviour of tire shred – sand mixtures. Canadian Geotechnical Journal, 41 (2), 227–241. doi:https://doi.org/10.1139/T03-086