References
- Azzouz, A.S. and Baligh, M.M., 1983. Loaded areas on cohesive slopes. Journal of Geotechnical Engineering, 109 (5), 724–729. doi:https://doi.org/10.1061/(ASCE)0733-9410(1983)109:5(724)
- Beygi, M., et al., 2018. The effect of rotational stiffness on the behaviour of retaining wall. International Journal of Geotechnical Engineering, 1–12. doi:https://doi.org/10.1080/19386362.2018.1517927
- Chavda, J.T. and Dodagoudar, G.R., 2018. Finite element evaluation of ultimate capacity of strip footing: assessment using various constitutive models and sensitivity analysis. Innovative Infrastructure Solutions, 3 (1), 15. doi:https://doi.org/10.1007/s41062-017-0121-4
- Chen, Q. and Abu-Farsakh, M., 2015. Ultimate bearing capacity analysis of strip footings on reinforced soil foundation. Soils and Foundations, 55 (1), 74–85. doi:https://doi.org/10.1016/J.SANDF.2014.12.006
- Cinicioglu, O. and Erkli, A., 2018. Seismic bearing capacity of surficial foundations on sloping cohesive ground. Soil Dynamics and Earthquake Engineering, 111, 53–64. doi:https://doi.org/10.1016/J.SOILDYN.2018.04.027
- Foroutan Kalourazi, A., Izadi, A., and Jamshidi Chenari, R., 2019. Seismic bearing capacity of shallow strip foundations in the vicinity of slopes using the lower bound finite element method. Soils and Foundations. doi:https://doi.org/10.1016/j.sandf.2019.08.014
- Georgiadis, K., 2010a. The influence of load inclination on the undrained bearing capacity of strip footings on slopes. Computers and Geotechnics, 37 (3), 311–322. doi:https://doi.org/10.1016/J.COMPGEO.2009.11.004
- Georgiadis, K., 2010b. Undrained bearing capacity of strip footings on slopes. Journal of Geotechnical and Geoenvironmental Engineering, 136 (5), 677–685. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0000269
- Ghosh, S. and Debnath, L., 2017. Seismic bearing capacity of shallow strip footing with coulomb failure mechanism using limit equilibrium method. Geotechnical and Geological Engineering, 35 (6), 2647–2661. doi:https://doi.org/10.1007/s10706-017-0268-y
- Graham, J., Andrews, M., and Shields, D.H., 1988. Stress characteristics for shallow footings in cohesionless slopes. Canadian Geotechnical Journal, 25 (2), 238–249. doi:https://doi.org/10.1139/t88-028
- Halder, K., Chakraborty, D., and Kumar Dash, S., 2017. Bearing capacity of a strip footing situated on soil slope using a non-associated flow rule in lower bound limit analysis. International Journal of Geotechnical Engineering, 1–9. doi:https://doi.org/10.1080/19386362.2017.1325119
- Jadar, C.M. and Ghosh, S., 2017. Seismic bearing capacity of shallow strip footing using horizontal slice method. International Journal of Geotechnical Engineering, 11 (1), 38–50. doi:https://doi.org/10.1080/19386362.2016.1183074
- Krabbenhoft, K., Lyamin, A., and Krabbenhoft, J. 2015. Optum computational engineering (OptumG2).
- Kumar, J. and Chakraborty, D., 2013. Seismic bearing capacity of foundations on cohesionless slopes. Journal of Geotechnical and Geoenvironmental Engineering, 139 (11), 1986–1993. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0000909
- Kumar, J. and Mohan Rao, V.B.K., 2003. Seismic bearing capacity of foundations on slopes. Géotechnique, 53 (3), 347–361. doi:https://doi.org/10.1680/geot.2003.53.3.347
- Kusakabe, O., Kimura, T., and Yamaguchi, H., 1981. Bearing capacity of slopes under strip loads on the top surfaces. Soils and Foundations, 21 (4), 29–40. doi:https://doi.org/10.3208/sandf1972.21.4_29
- Leshchinsky, B. and Xie, Y., 2017. Bearing capacity for spread footings placed near C′-Φ′ slopes. Journal of Geotechnical and Geoenvironmental Engineering, 143 (1), 06016020. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0001578
- Michalowski, R.L., 2010. Limit analysis and stability charts for 3D slope failures. Journal of Geotechnical and Geoenvironmental Engineering, 136 (4), 583–593. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0000251
- Michalowski, R.L. and Martel, T., 2011. Stability charts for 3D failures of steep slopes subjected to seismic excitation. Journal of Geotechnical and Geoenvironmental Engineering, 137 (2), 183–189. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0000412
- Mofidi Rouchi, J., Farzaneh, O., and Askari, F., 2014. Bearing capacity of strip footings near slopes using lower bound limit analysis. Civil Engineering Infrastructures Journal, 47 (1), 89–109. doi:https://doi.org/10.7508/CEIJ.2014.01.007
- Narita, K. and Yamaguchi, H., 1990. Bearing capacity analysis of foundations on slopes by using log-spiral sliding surfaces. Soils and Foundations, 30 (3), 144–152. doi:https://doi.org/10.3208/sandf1972.30.3_144
- Salih Keskin, M. and Laman, M., 2013. Model studies of bearing capacity of strip footing on sand slope. KSCE Journal of Civil Engineering, 17 (4), 699–711. doi:https://doi.org/10.1007/s12205-013-0406-x
- Shiau, J.S., et al., 2011. Undrained stability of footings on slopes. International Journal of Geomechanics, 11 (5), 381–390. doi:https://doi.org/10.1061/(ASCE)GM.1943-5622.0000092
- Shiau, J.S. and Watson, J.F. 2008. 3D bearing capacity of shallow foundations located near deep excavation sites.
- Transportation, A. (American A. of S.H. and, and Officials), 2012. Standard Specifications for Highway Bridges. Sections 4.4.1.3 and 4.4.9. In, 45–66. 6th ed. Washington, DC: LRFD bridge design specifications.
- Vali, R., et al., 2017. Properties of geogrid-reinforced-marine-slope due to the groundwater level changes. Marine Georesources & Geotechnology. 1064119X.2017.1386741. doi:https://doi.org/10.1080/1064119X.2017.1386741
- Veiskarami, M., Jamshidi Chenari, R., and Jameei, A.A., 2017. Bearing capacity of strip footings on anisotropic soils by the finite elements and linear programming. International Journal of Geomechanics, 17 (12), 04017119. doi:https://doi.org/10.1061/(ASCE)GM.1943-5622.0001018
- Zhou, H., et al., 2018. The bearing capacity and failure mechanism of a vertically loaded strip footing placed on the top of slopes. Computers and Geotechnics, 94, 12–21. doi:https://doi.org/10.1016/J.COMPGEO.2017.08.009