References
- AASHTO T 307, 2005. Standard method of test for determining the resilient modulus of soils and aggregate materials. Washington: American Association of State Highway and Transportation Officials, 99.
- Ameri, M., Kalantari, B., and Jahandari, S., 2015. Laboratory study of determination of optimum amount of water and clay in mortar made with lime and fly ash, International conference on research in science and technology, Kualalumpur, Malaysia.
- Anderson, T.L., 2005. Fracture mechanics: fundamentals and applications. CRC press, Taylor and Francis Group.
- ASTM D1557-07, 2007. Standard test methods for laboratory compaction characteristics of soil using modified effort, (56,000 ft-lbf/ft3 (2,700 kN-m/m3)). West Conshohocken: ASTM International.
- ASTM D2216-10, 2010. Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass. West Conshohocken: ASTM International.
- ASTM D2435M-11, 2011. Standard test methods for one-dimensional consolidation properties of soils using incremental loading. West Conshohocken: ASTM International.
- ASTM D422-63, 2002. Standard method for particle-analysis of soils. West Conshohocken: ASTM International.
- ASTM D423-66, 1972. Standard method of test for liquid limit of soils. West Conshohocken: ASTM International.
- ASTM D424-54, 1982. Standard method of test for plastic limit. West Conshohocken: ASTM International.
- ASTM D5102-09, 2009. Standard test methods for unconfined compressive strength of compacted soil-lime mixtures. West Conshohocken: ASTM International.
- ASTM D854-10, 2010. Standard test methods for specific gravity of soil solids by water pycnometer. West Conshohocken: ASTM International.
- Aydogmus, T., Alexiew, D., and Klapperich, H., 2004, March. Investigation of interaction behaviour of cement-stabilized cohesive soil and PVA geogrids. In Geotechnical engineering with geosynthetics, Proceedings of the third European Geosynthetics Conference, Munich, Germany. p (Vol. 3).
- Azadegan, O., et al., 2013. Geogrid reinforced lime cement treated granular soils. In: Applied mechanics and materials. Trans Tech Publications Ltd, Vol. 330, 1090–1094.
- Azadegan, O. and Li, J., 2015. Effects of lime and cement treated platform on the behavior of circular footing founded on soft clay. International Journal of Geotechnical Engineering, 9 (2), 214–221. doi:https://doi.org/10.1179/1939787914Y.0000000041
- AzariJafari, H., et al., 2014. Studying effects of chemical admixtures on the workability retention of zeolitic Portland cement mortar. Construction and Building Materials, 72, 262–269. doi:https://doi.org/10.1016/j.conbuildmat.2014.09.020
- AzariJafari, H., et al., 2015. Enhancing workability retention of concrete containing natural zeolite by superplasticizers’ combination. Special Publication, 302, 416–424.
- AzariJafari, H., et al., 2016. Effects of pre-soaked super absorbent polymers on fresh and hardened properties of self-consolidating lightweight concrete. Construction and Building Materials, 113, 215–220. doi:https://doi.org/10.1016/j.conbuildmat.2016.03.010
- AzariJafari, H., et al., 2019. Ternary blended cement: an eco-friendly alternative to improve resistivity of high-performance self-consolidating concrete against elevated temperature. Journal of Cleaner Production, 223, 575–586. doi:https://doi.org/10.1016/j.jclepro.2019.03.054
- Bahmani, M., et al., 2019. Biological soil improvement using new environmental bacteria isolated from northern Iran. Environmental Geotechnics, 1–13. doi:https://doi.org/10.1680/jenge.18.00176
- Basha, E.A., et al., 2005. Stabilization of residual soil with rice husk ash and cement. Construction and Building Materials, 19 (6), 448–453. doi:https://doi.org/10.1016/j.conbuildmat.2004.08.001
- Carlton, B.D. and Pestana, J.M., 2016. A unified model for estimating the in-situ small strain shear modulus of clays, silts, sands, and gravels. Soil Dynamics and Earthquake Engineering, 88, 345–355. doi:https://doi.org/10.1016/j.soildyn.2016.01.019
- Cong, M., Longzhu, C., and Bing, C., 2014. Analysis of strength development in soft clay stabilized with cement-based stabilizer. Construction and Building Materials, 71, 354–362. doi:https://doi.org/10.1016/j.conbuildmat.2014.08.087
- Consoli, N.C., et al., 2011. Variables controlling stiffness and strength of lime-stabilized soils. Journal of Geotechnical and Geoenvironmental Engineering, 137 (6), 628–632. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0000470
- Das, B.M., 1979. Introduction to soil mechanics. Iowa State University Press.
- Duncan, J.M. and Bursey, A., 2013. Soil modulus correlations. In: H. Kulhawy, ed. Foundation engineering in the face of uncertainty: honoring, 321–336.
- Esaifan, M., et al., 2016. Hydrated lime/potassium carbonate as alkaline activating mixture to produce kaolinitic clay based inorganic polymer. Applied Clay Science, 126, 278–286. doi:https://doi.org/10.1016/j.clay.2016.03.026
- Eskisar, T., 2015. Influence of cement treatment on unconfined compressive strength and compressibility of lean clay with medium plasticity. Arabian Journal for Science and Engineering, 40 (3), 763–772. doi:https://doi.org/10.1007/s13369-015-1579-z
- Fatehi, H., Bahmani, M., and Noorzad, A., 2019. Strengthening of dune sand with sodium alginate biopolymer. In: Geo-Congress 2019 March: soil improvement. Reston, VA, USA: American Society of Civil Engineers, 157–166.
- Garzón, E., et al., 2016. Effect of lime on stabilization of phyllite clays. Applied Clay Science, 123, 329–334. doi:https://doi.org/10.1016/j.clay.2016.01.042
- Ghadir, P. and Ranjbar, N., 2018. Clayey soil stabilization using geopolymer and Portland cement. Construction and Building Materials, 188, 361–371. doi:https://doi.org/10.1016/j.conbuildmat.2018.07.207
- Ghasemi, M., et al., 2019. Dealing with workability loss challenge in SCC mixtures incorporating natural pozzolans: a study of natural zeolite and pumice. Construction and Building Materials, 222, 424–436. doi:https://doi.org/10.1016/j.conbuildmat.2019.06.174
- Gholhaki, M., Hajforoush, M., and Kazemi, M., 2018. An investigation on the fresh and hardened properties of self-compacting concrete incorporating magnetic water with various pozzolanic materials. Construction and Building Materials, 158, 173–180. doi:https://doi.org/10.1016/j.conbuildmat.2017.09.135
- Ghourchian, S., Wyrzykowski, M., and Lura, P., 2016. The bleeding test: a simple method for obtaining the permeability and bulk modulus of fresh concrete. Cement and Concrete Research, 89, 249–256. doi:https://doi.org/10.1016/j.cemconres.2016.08.016
- Gueddouda, M.K., et al., 2011. Chemical stabilization of expansive clays from Algeria. Global Journal of Researches in Engineering, 11 (5), 1–7.
- Guleria, S. and Dutta, R., 2012. Effect of addition of tire chips on the unconfined compressive strength of fly ash-lime-gypsum mixture. International Journal of Geotechnical Engineering, 6 (1), 1–13. doi:https://doi.org/10.3328/IJGE.2012.06.01.1-13
- Hajforoush, M., Madandoust, R., and Kazemi, M., 2019. Effects of simultaneous utilization of natural zeolite and magnetic water on engineering properties of self-compacting concrete. Asian Journal of Civil Engineering, 20 (2), 289–300. doi:https://doi.org/10.1007/s42107-018-00106-w
- Hajjaji, M. and Mleza, Y., 2014. Hydrated burnt clay–lime mixes: effects of curing time and lime addition. Applied Clay Science, 101, 177–183. doi:https://doi.org/10.1016/j.clay.2014.07.033
- Han, Z. and Vanapalli, S.K., 2016. Relationship between resilient modulus and suction for compacted subgrade soils. Engineering Geology, 211, 85–97. doi:https://doi.org/10.1016/j.enggeo.2016.06.020
- Hataf, N., Ghadir, P., and Ranjbar, N., 2018. Investigation of soil stabilization using chitosan biopolymer. Journal of Cleaner Production, 170, 1493–1500. doi:https://doi.org/10.1016/j.jclepro.2017.09.256
- Hobbs, D.W., 1971. The dependence of the bulk modulus, Young’s modulus, creep, shrinkage and thermal expansion of concrete upon aggregate volume concentration. Matériaux et construction, 4 (2), 107–114. doi:https://doi.org/10.1007/BF02473965
- Jafari, K., et al., 2018. Optimizing the mixture design of polymer concrete: an experimental investigation. Construction and Building Materials, 167, 185–196. doi:https://doi.org/10.1016/j.conbuildmat.2018.01.191
- Jahandari, S., 2015. Laboratory study of moisture and capillarity impact on lime concrete resistance due to the increase of ground water level. Kerman, Iran: Faculty of Civil and Surveying Engineering, Department of Geotechnical Engineering, Graduate University of Advanced Technology.
- Jahandari, S., et al., 2017a. Experimental study of the effects of geogrids on elasticity modulus, brittleness, strength, and stress-strain behavior of lime stabilized kaolinitic clay. GeoResJ, 13, 49–58. doi:https://doi.org/10.1016/j.grj.2017.02.001
- Jahandari, S., et al., 2017b. Experimental study of the effects of curing time on geotechnical properties of stabilized clay with lime and geogrid. International Journal of Geotechnical Engineering, 13 (2), 172–183. doi:https://doi.org/10.1080/19386362.2017.1329259
- Jahandari, S., et al., 2017c. Laboratory study of the effect of degrees of saturation on lime concrete resistance due to the groundwater level increment. Geotechnical and Geological Engineering, 36 (1), 413–424. doi:https://doi.org/10.1007/s10706-017-0335-4
- Jahandari, S., et al., 2019. Effects of saturation degrees, freezing-thawing, and curing on geotechnical properties of lime and lime-cement concretes. Cold Regions Science and Technology, 160, 242–251. doi:https://doi.org/10.1016/j.coldregions.2019.02.011
- Jarrah, M., et al., 2018. The effect of elevated temperatures on the tensile performance of GFRP and CFRP sheets. Construction and Building Materials, 190, 38–52. doi:https://doi.org/10.1016/j.conbuildmat.2018.09.086
- Jarrah, M., et al., 2019. Experimental and numerical evaluation of piston metallic damper (PMD). Journal of Constructional Steel Research, 154, 99–109. doi:https://doi.org/10.1016/j.jcsr.2018.11.024
- Karaca, Z. and Onargan, T., 2012. A new approach to stone deformation: stone deformability index. Proceedings of the Institution of Civil Engineers-Construction Materials, 165 (3), 189–195. doi:https://doi.org/10.1680/coma.9.00031
- Kazemi, M., et al., 2019a. Non-linear behaviour of concrete beams reinforced with GFRP and CFRP bars grouted in sleeves. Structures, 23 (February), 87–102. doi:https://doi.org/10.1016/j.istruc.2019.10.013
- Kazemi, M., Madandoust, R., and de Brito, J., 2019b. Compressive strength assessment of recycled aggregate concrete using Schmidt rebound hammer and core testing. Construction and Building Materials, 224, 630–638. doi:https://doi.org/10.1016/j.conbuildmat.2019.07.110
- Keramatikerman, M., Chegenizadeh, A., and Nikraz, H., 2016. Effect of GGBFS and lime binders on the engineering properties of clay. Applied Clay Science, 132, 722–730. doi:https://doi.org/10.1016/j.clay.2016.08.029
- Li, J., Saberian, M., and Nguyen, B.T., 2018. Effect of crumb rubber on the mechanical properties of crushed recycled pavement materials. Journal of Environmental Management, 218, 291–299. doi:https://doi.org/10.1016/j.jenvman.2018.04.062
- Little, D.N., 1999. Evaluation of structural properties of lime stabilized soils and aggregates. In: Volume 1: summary of findings. Prepared for The National lime Association.
- Madandoust, R., et al., 2019. Effect of the curing type on the mechanical properties of lightweight concrete with polypropylene and steel fibres. Construction and Building Materials, 223, 1038–1052. doi:https://doi.org/10.1016/j.conbuildmat.2019.08.006
- Madandoust, R., Bazkiyaei, Z.F.Z., and Kazemi, M., 2018. Factor influencing point load tests on concrete. Asian Journal of Civil Engineering, 19 (8), 937–947. doi:https://doi.org/10.1007/s42107-018-0074-8
- Madandoust, R. and Kazemi, M., 2017. Numerical analysis of break-off test method on concrete. Construction and Building Materials, 151, 487–493. doi:https://doi.org/10.1016/j.conbuildmat.2017.05.126
- Miao, Y., et al., 2016. Effect of temperature on resilient modulus and shear strength of unbound granular materials containing fine RAP. Construction and Building Materials, 124, 1132–1141. doi:https://doi.org/10.1016/j.conbuildmat.2016.08.137
- Mirzababaei, M., et al., 2013. Unconfined compression strength of reinforced clays with carpet waste fibers. Journal of Geotechnical and Geoenvironmental Engineering, 139 (3), 483–493. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0000792
- Moghadam, S.Y., et al., 2017. Analytical study on the behavior of corrosion damaged reinforced concrete beams strengthen with FRP. Romanian Journal of Materials, 47 (4), 514–521.
- Mohammadi, et al., 2019. Experimental and numerical investigation of an innovative buckling-restrained fuse under cyclic loading. Structures, 22 (December), 186–199. doi:https://doi.org/10.1016/j.istruc.2019.07.014
- Mohammadi, M., et al., 2020. Experimental and Numerical Investigation of Innovative Composite Buckling-Restrained Fuse. In: ACMSM25, Proceeding of the 25th Australasian Conference on Mechanics of Structures and Materials Brisbane, Qld, 113–121.
- Muntohar, A.S., 2002. Utilization of uncontrolled burnt rice husk ash in soil improvement. Civil Engineering Dimension, 4 (2), 100–105.
- Nayak, S. and Sarvade, P.G., 2012. Effect of cement and quarry dust on shear strength and hydraulic characteristics of lithomargic clay. Geotechnical and Geological Engineering, 30 (2), 419–430. doi:https://doi.org/10.1007/s10706-011-9477-y
- Nikookar, M., et al., 2016. Experimental evaluation of the strength of peat stabilized with hydrated lime. Periodica Polytechnica Civil Engineering, 60 (4), 491–502. doi:https://doi.org/10.3311/PPci.8159
- Park, S.S., 2011. Unconfined compressive strength and ductility of fiber-reinforced cemented sand. Construction and Building Materials, 25 (2), 1134–1138. doi:https://doi.org/10.1016/j.conbuildmat.2010.07.017
- Porbaha, A., 1996. Geotextile reinforced lime treated cohesive soil retaining walls. Geosynthetics International, 3 (3), 393–405. doi:https://doi.org/10.1680/gein.3.0068
- Rahgozar, M. and Saberian, M., 2016. Geotechnical properties of peat soil stabilised with shredded waste tyre chips. Mires and Peat, 18 (3), 1–12.
- Rai, R., Khandelwal, M., and Jaiswal, A., 2012. Application of geogrids in waste dump stability: a numerical modeling approach. Environmental Earth Sciences, 66 (5), 1459–1465. doi:https://doi.org/10.1007/s12665-011-1385-1
- Rajesh, S. and Viswanadham, B.V.S., 2009. Evaluation of geogrid as a reinforcement layer in clay based engineered barriers. Applied Clay Science, 46 (2), 153–165. doi:https://doi.org/10.1016/j.clay.2009.07.019
- Rasekh, H., et al., 2020. Rheology and workability of SCC. In: Self-compacting concrete: materials, properties and applications. Woodhead Publishing, 31–63.
- Reid, J.M. and Brookes, A.H., 1999. Investigation of lime stabilised contaminated material. Engineering Geology, 53 (2), 217–231. doi:https://doi.org/10.1016/S0013-7952(99)00035-6
- Saberian, M., et al., 2017a. Effect of curing, capillary action, and groundwater level increment on geotechnical properties of lime concrete: experimental and prediction studies. Journal of Rock Mechanics and Geotechnical Engineering, 9 (4), 638–647. doi:https://doi.org/10.1016/j.jrmge.2017.01.004
- Saberian, M., et al., 2017b. Experimental and phenomenological study of the effects of adding shredded tire chips on geotechnical properties of peat. International Journal of Geotechnical Engineering, 12 (4), 347–356. doi:https://doi.org/10.1080/19386362.2016.1277829
- Saberian, M., et al., 2019. Recycled concrete aggregate mixed with crumb rubber under elevated temperature. Construction and Building Materials, 222, 119–129. doi:https://doi.org/10.1016/j.conbuildmat.2019.06.133
- Saberian, M., et al., 2020. Application of demolition wastes mixed with crushed glass and crumb rubber in pavement base/subbase. Resources, Conservation and Recycling, 156, 104722. doi:https://doi.org/10.1016/j.resconrec.2020.104722
- Saberian, M. and Rahgozar, M.A., 2016. Geotechnical properties of peat soil stabilized with shredded waste tyre chips in combination with gypsum, lime or cement. Mires and Peat, 18 (16), 1–16.
- Sadrossadat, E., Heidaripanah, A., and Osouli, S., 2016. Prediction of the resilient modulus of flexible pavement subgrade soils using adaptive neuro-fuzzy inference systems. Construction and Building Materials, 123, 235–247. doi:https://doi.org/10.1016/j.conbuildmat.2016.07.008
- Selvadurai, A.P.S. and Katebi, A., 2013. Mindlin’s problem for an incompressible elastic half-space with an exponential variation in the linear elastic shear modulus. International Journal of Engineering Science, 65, 9–21. doi:https://doi.org/10.1016/j.ijengsci.2013.01.002
- Shabjareh, S.S., et al., 2014. Laboratory study of the effect of temperature on strength and strain-stress curve of lime-stabilized soil. Bulletin Environment Pharmacoly Life Science, 4 (1), 376–381.
- Shahin, M. and Hong, L., 2010. Utilization of shredded rubber tires for cement-stabilized soft clays. In A. Puppala, et al. (ed), Ground Improvement and Geosynthetics - Proceedings of the GeoShanghai International Conference,Shanghai, China: American Society of Civil Engineers, 181–186.
- Shariati, M., et al., 2019. Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete. Advances in Concrete Construction, 8 (3), 225–237.
- Sharma, R., et al., 2011. Strength of weakly cemented sands from drained multistage triaxial tests. Journal of Geotechnical and Geoenvironmental Engineering, 137 (12), 1202–1210. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0000537
- Siddique, R., et al., 2019. Self-compacting concrete: materials, properties and applications. Woodhead Publishing Series in Civil and Structural Engineering, 1–396.
- Singh, S.P., Roy, N., and Sangita, S., 2016. Strength and hydraulic conductivity of sedimented ash deposits treated with lime column. International Journal of Geotechnical Engineering, 11 (3), 217–224. doi:https://doi.org/10.1080/19386362.2016.1208415
- Tabatabai, A.M., 1997. Pavement [Roosazi Rah]. ISBN 964-01-0157-5. Tehran, Iran (in Farsi): University’s publication center.
- Tang, C., et al., 2007. Strength and mechanical behavior of short polypropylene fiber reinforced and cement stabilized clayey soil. Geotextiles and Geomembranes, 25 (3), 194–202. doi:https://doi.org/10.1016/j.geotexmem.2006.11.002
- Tao, Z., et al., 2018. Compressive behaviour of geopolymer concrete-filled steel columns at ambient and elevated temperatures. International Journal of High-Rise Building, 7 (4), 327–342.
- Thompson, M.R., 1966. Shear strength and elastic properties of lime soil mixtures. Champaign, IL: Highway Research Board, Univ. of Illinois, 1–14.
- Vali, R., et al., 2017. A three-dimensional numerical comparison of bearing capacity and settlement of tapered and under-reamed piles. International Journal of Geotechnical Engineering, 13 (3), 236–248. doi:https://doi.org/10.1080/19386362.2017.1336586
- Xu, C., et al., 2019. Using genetic algorithms method for the paramount design of reinforced concrete structures. Structural Engineering and Mechanics, 71 (5), 503–513.
- Yang, G., et al., 2012. Geogrid-reinforced lime-treated cohesive soil retaining wall: case study and implications. Geotextiles and Geomembranes, 35, 112–118. doi:https://doi.org/10.1016/j.geotexmem.2012.09.001
- Zainorabidin, A. and Said, M.J.M., 2015. Determination of shear wave velocity using multi-channel analysis of surface wave method and shear modulus estimation of peat soil at Western Johore. Procedia Engineering, 125, 345–350. doi:https://doi.org/10.1016/j.proeng.2015.11.073
- Zhu, H., et al., 2008. Application of the geogrid reinforced soil retaining walls for a high slope supporting project. In: G. Li, Y. Chen, X. Tang, eds. Geosynthetics in civil and environmental engineering. Berlin, Heidelberg: Springer, 266–270. doi:https://doi.org/10.1007/978-3-540-69313-0_51