References
- Abdrabbo, F.M. and Ali, N.A., 2015. Behaviour of single pile in consolidating soil. Alexandria Engineering Journal, 54 (3), 481–495. doi:https://doi.org/10.1016/j.aej.2015.05.016
- Addenbrooke, T.I., Potts, D.M., and Puzrin, A.M., 1997. The influence of pre-failure soil stiffness on the numerical analysis of tunnel construction. Géotechnique, 47 (3), 693–712. doi:https://doi.org/10.1680/geot.1997.47.3.693
- Afshani, A. and Akagi, H., 2015. Artificial ground freezing application in shield tunneling. Japanese Geotechnical Society Special Publication, 3 (2), 71–75. doi:https://doi.org/10.3208/jgssp.v03.j01
- Afshani, A., et al., 2014. Numerical analysis of the effect of EPB shield tunneling on soil stress-deformation behavior. JSCE Journal, Geotechnics, 2, 224–238. doi:https://doi.org/10.2208/journalofjsce.2.1_224
- Alam, M.J.I., Gnanendran, C.T., and Lo, S.R., 2017. Modelling the settlement behaviour of a strip footing on sloping sandy fill under cyclic loading conditions. Computers and Geotechnics, 86, 181–192. doi:https://doi.org/10.1016/j.compgeo.2017.01.010
- Been, K. and Jefferies, M.G., 1985. A state parameter for sands. Géotechnique, 35 (2), 99–112. doi:https://doi.org/10.1680/geot.1985.35.2.99
- Boushehrian, A.H., Hataf, N., and Ghahramani, A., 2011. Modeling of the cyclic behavior of shallow foundations resting on geomesh and grid-anchor reinforced sand. Geotextiles and Geomembranes, 29 (3), 242–248. doi:https://doi.org/10.1016/j.geotexmem.2010.11.008
- Dafalias Yannis, F. and Manzari Majid, T., 2004. Simple plasticity sand model accounting for fabric change effects. Journal of Engineering Mechanics, 130 (6), 622–634. doi:https://doi.org/10.1061/(ASCE)0733-9399(2004)130:6(622)
- Duncan, J.M. and Chang, C.-Y., 1970. Nonlinear analysis of stress and strain in soils. Journal of the Soil Mechanics and Foundations Division, 96 (5), 1629–1653.
- Ehrlich, M. and Silva, R.C., 2015. Behavior of a 31m high excavation supported by anchoring and nailing in residual soil of gneiss. Engineering Geology, 191, 48–60. doi:https://doi.org/10.1016/j.enggeo.2015.01.028
- El Kamash, W. and El Naggar, H., 2018. Numerical study on buckling of end-bearing piles in soft soil subjected to axial loads. Geotechnical and Geological Engineering, 36 (5), 3183–3201. doi:https://doi.org/10.1007/s10706-018-0529-4
- El Kamash, W. and Han, J., 2014. Displacements of column-supported embankments over soft clay after widening considering soil consolidation and column layout: numerical analysis. Soils and Foundations, 54 (6), 1054–1069. doi:https://doi.org/10.1016/j.sandf.2014.11.002
- Evgin, E. and Altaee, A., 1990. A mathematical model for soils. Mathematical and Computer Modelling, 14, 915–920. doi:https://doi.org/10.1016/0895-7177(90)90314-D
- Goldstein, R.V., Dudchenko, A.V., and Kuznetsov, S.V., 2016. The modified Cam-Clay (MCC) model: cyclic kinematic deviatoric loading. Archive of Applied Mechanics, 86 (12), 2021–2031. doi:https://doi.org/10.1007/s00419-016-1169-x
- Guo, P. and Li, W.-C., 2012. Development and implementation of Duncan-Chang constitutive model in GeoStudio2007. Procedia Engineering, 31, 395–402. doi:https://doi.org/10.1016/j.proeng.2012.01.1042
- Heidarzadeh, H., 2019. Evaluation of modified cam-clay constitutive model in flac and its development by fish programming. European Journal of Environmental and Civil Engineering, 1–19. doi:https://doi.org/10.1080/19648189.2018.1521752
- Heidarzadeh, H. and Kamgar, R., 2020. Evaluation of the importance of gradually releasing stress around excavation regions in soil media and the effect of liners installation time on tunneling. Geotechnical and Geological Engineering, 38 (2), 2213–2225. doi:https://doi.org/10.1007/s10706-019-01158-8
- Heidarzadeh, H. and Oliaei, M., 2016. Evaluation of the effect of yield surface shape on static and dynamic analyses of geotechnical structures. Sharif Journal of Civil Engineering, 32.2 (1.2), 15–26.
- Heidarzadeh, H. and Oliaei, M., 2018a. Development of a generalized model using a new plastic modulus based on bounding surface plasticity. Acta Geotechnica, 13 (4), 925–941. doi:https://doi.org/10.1007/s11440-017-0599-0
- Heidarzadeh, H. and Oliaei, M., 2018b. An efficient generalized plasticity constitutive model with minimal complexity and required parameters. KSCE Journal of Civil Engineering, 22 (4), 1109–1120. doi:https://doi.org/10.1007/s12205-017-1037-4
- Hejazi, Y., Dias, D., and Kastner, R., 2008. Impact of constitutive models on the numerical analysis of underground constructions. Acta Geotechnica, 3 (4), 251–258. doi:https://doi.org/10.1007/s11440-008-0056-1
- Ibrahim, A., Dif, A., and Othman, W., 2018. Nonlinearity analysis in studying shallow grid foundation. Alexandria Engineering Journal, 57 (2), 859–866. doi:https://doi.org/10.1016/j.aej.2016.11.021
- Ilyashenko, A.V. and Kuznetsov, S.V., 2017. Cam-clay models in mechanics of granular materials. Mechanics and Mechanical Engineering, 21 (4), 813–821.
- Itasca, 2011. Fast lagrangian analysis of continua [FLAC], Version 7.0. Minneapolis, MN: Itasca Consulting Group.
- Jafarzadeh, F. and Zamanian, M., 2014. Effect of intermediate principal stress parameter on cyclic behavior of sand. Scientia Iranica, 21 (5), 1566–1576.
- Jafarzadeh, F. and Zamanian, M., 2018. Effect of anisotropy on the dynamic properties of the loose babolsar sand with cyclic hollow cylinder apparatus. Sharif Journal of Civil Engineering, 34.2 (2.2), 103–112. doi:https://doi.org/10.24200/j30.2018.1371
- Ling, H.I. and Yang, S.T., 2006. Unified sand model based on the critical state and generalized plasticity. Journal of Engineering Mechanics, 132 (12), 1380–1391. doi:https://doi.org/10.1061/(ASCE)0733-9399(2006)132:12(1380)
- Ling Hoe, I. and Yang, S., 2006. Unified sand model based on the critical state and generalized plasticity. Journal of Engineering Mechanics, 132 (12), 1380–1391. doi:https://doi.org/10.1061/(ASCE)0733-9399(2006)132:12(1380)
- Mirmoradi, S.H. and Ehrlich, M., 2018. Numerical simulation of compaction-induced stress for the analysis of RS walls under working conditions. Geotextiles and Geomembranes, 46 (3), 354–365. doi:https://doi.org/10.1016/j.geotexmem.2018.01.006
- Mirmoradi, S.H., et al., 2019. Evaluation of the combined effect of facing inclination and uniform surcharge on GRS walls. Geotextiles and Geomembranes, 103485. doi:https://doi.org/10.1016/j.geotexmem.2019.103485
- Oliaei, M. and Kouzegaran, S., 2017. Efficiency of cellular geosynthetics for foundation reinforcement. Geotextiles and Geomembranes, 45 (2), 11–22. doi:https://doi.org/10.1016/j.geotexmem.2016.11.001
- Patil, U.D., et al., 2018a. Bounding surface-based modeling of compacted silty sand exhibiting suction dependent postpeak strain softening. International Journal for Numerical and Analytical Methods in Geomechanics, 42 (14), 1741–1761. doi:https://doi.org/10.1002/nag.2837
- Patil, U.D., et al., 2018b. Strength, stiffness and radial anisotropy of compacted silty sand under suction-controlled axisymmetric shearing. Geotechnical and Geological Engineering, 36 (6), 3945–3960. doi:https://doi.org/10.1007/s10706-018-0590-z
- Patil, U.D., et al., 2017. Modeling critical-state shear strength behavior of compacted silty sand via suction-controlled triaxial testing. Engineering Geology, 231, 21–33. doi:https://doi.org/10.1016/j.enggeo.2017.10.011
- Sadeghian, S. and Latifi, M., 2013. Using state parameter to improve numerical prediction of a generalized plasticity constitutive model. Computers & Geosciences, 51, 255–268. doi:https://doi.org/10.1016/j.cageo.2012.06.025
- Sarkar, D., Goudarzy, M., and König, D., 2019. An interpretation of the influence of particle shape on the mechanical behavior of granular material. Granular Matter, 21 (3), 53. doi:https://doi.org/10.1007/s10035-019-0909-3
- Schanz, T., Vermeer, P.A., and Bonnier, P.G., 1999. The hardening soil model: formulation and verification. Rotterdam, Netherlands: Beyond 2000 in computational geotechnics.
- Surarak, C., et al., 2012. Stiffness and strength parameters for hardening soil model of soft and stiff Bangkok clays. Soils and Foundations, 52 (4), 682–697. doi:https://doi.org/10.1016/j.sandf.2012.07.009
- Woldekidan, M.F., Huurman, M., and Pronk, A.C., 2012. A modified HS model: numerical applications in modeling the response of bituminous materials. Finite Elements in Analysis and Design, 53, 37–47. doi:https://doi.org/10.1016/j.finel.2012.01.003