References
- ASTM, 2007. D4543, Standard practices for preparing rock core as cylindrical test specimens and verifying conformance to dimensional and shape tolerances. American Society for Testing & Materials, 04, 08.
- Awang, H., et al. 2017. Correlation between P-wave velocity and strength index for shale to predict uniaxial compressive strength value. MATEC, 103, 07017.
- Bieniawski, Z.T., 1975. The point-load test in geotechnical practice. Engineering Geology, 9 (1), 1–11. doi:https://doi.org/10.1016/0013-7952(75)90024-1
- Bieniawski, Z.T., 1989. Engineering rock mass classifications: a complete manual for engineers and geologists in mining, civil, and petroleum engineering. New York.: John Wiley & Sons.
- Broch, E., 1983. Estimation of strength anisotropy using the point-load test. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 20 (4), 181–187. doi:https://doi.org/10.1016/0148-9062(83)90942-7
- Broch, E. and Franklin, J., 1972. The point-load strength test. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 9 (6), 669–676. doi:https://doi.org/10.1016/0148-9062(72)90030-7
- Das, B., 1985. Evaluation of the point load strength for soft rock classification. ICGCM, 220–226.
- Franklin, J., 1985. Suggested method for determining point load strength. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 22 (2), 51–60. doi:https://doi.org/10.1016/0148-9062(85)92327-7
- Goodman, R.E., 1989. Introduction to rock mechanics. New York: John Wiley & Sons.
- ISRM, 2007. The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974-2006. Kozan, Ankara: ISRM.
- Karakul, H., Ulusay, R., and Isik, N., 2010. Empirical models and numerical analysis for assessing strength anisotropy based on block punch index and uniaxial compression tests. International Journal of Rock Mechanics and Mining Sciences, 47 (4), 657–665. doi:https://doi.org/10.1016/j.ijrmms.2010.03.006
- Khanlari, G., Rafiei, B., and Abdilor, Y., 2015. Evaluation of strength anisotropy and failure modes of laminated sandstones. Arabian Journal of Geosciences, 8 (5), 3089–3102. doi:https://doi.org/10.1007/s12517-014-1411-1
- Mazanti, B. and Sowers, G., 1966. Laboratory testing of rock strength. Testing techniques for rock mechanics. West Conshohocken: ASTM International, 207–231.
- Mishra, D. and Basu, A., 2012. Use of the block punch test to predict the compressive and tensile strengths of rocks. International Journal of Rock Mechanics and Mining Sciences, 51, 119–127. doi:https://doi.org/10.1016/j.ijrmms.2012.01.016
- Mohamed, K., 2010. Bearing capacity of interbedded weak weathered sedimentary rock. Dissertation (Ph.D). Universiti Teknologi MARA.
- Mohamed, Z., 2004. Engineering characterization of weathered sedimentary rock for engineering work. Dissertation (PhD). National University of Malaysia.
- Mohamed, Z., Mohamed, K., and Awang, H., 2007a. Empirical strength models, elastic modulus and stiffness of weathered sandstone and shale as a composite rock. EJGE, 12, 730.
- Mohamed, Z., Rafek, A., and Komoo, I., 2004. Geomechanical behaviour of interbedded rock mass of Kenny hill formation. Proceedings 4th ASEGE, 7, 179.
- Mohamed, Z., Rafek, A.G., and Komoo, I., 2007b. Characterisation and classification of the physical deterioration of tropically weathered kenny hill rock for civil works. EJGE, 12, 16.
- Roghanchi, P. and Kallu, R., 2014. Block punch index (BPI) test—a new consideration on validity and correlations for basalt and rhyolite rock types. Journal of Mining Science, 50 (3), 475–483. doi:https://doi.org/10.1134/S1062739114030090
- Saroglou, H. and Tsiambaos, G., 2006. Point load strength determination of anisotropic rocks. EUROCK, 2006, 603–608.
- Smith, H.J., 1997. The point load test for weak rock in dredging applications. International Journal of Rock Mechanics and Mining Sciences, 34 (3–4), 295. e291-295. e213. doi:https://doi.org/10.1016/S1365-1609(97)00063-4
- Stacey, T., 1980. A simple device for the direct shear-strength testing of intact rock. Journal- South African Institute of Mining and Metallurgy, 80 (3), 129–130.
- Taselaar, F., 1982. Report on the development of a rock punch apparatus. Delft, The Netherlands: University of Technology, Faculty of Mining and Petroleum Engineering.
- Tate, R., Tan, D., and Ng, T., 2008. Geological map of Peninsular Malaysia., scale 1:1 000 000. Malaysia: Malaysia Geological Society of Malaysia & University Malaya.
- Touret, O., et al. 1990. Etude de la repartition de l’eau dans des argiles saturees Mg2 aux fortes teneurs en eau. Clay Minerals, 25 (2), 217–233. doi:https://doi.org/10.1180/claymin.1990.025.2.07
- Ulusay, R. and Gokceoglu, C., 1997. The modified block punch index test. Canadian Geotechnical Journal, 34 (6), 991–1001. doi:https://doi.org/10.1139/t97-049
- Ulusay, R. and Gokceoglu, C., 1999. A new test procedure for the determination of the block punch index and its possible uses in rock engineering. ISRM News Journal, 6 (1), 50–54.
- Ulusay, R., Gokceoglu, C., and Sulukcu, S., 2001. Draft ISRM suggested method for determining block punch strength index (BPI). International Journal of Rock Mechanics and Mining Sciences, 38 (8), 1113–1119. doi:https://doi.org/10.1016/S1365-1609(01)00078-8
- Unal, E., 1996. In: A.A. Balkema, eds. Modified rock mass classification: M-RMR system. Rotterdam: the Bieniawski Jubilee Collection.
- Vallejo, L.E., Welsh, R.A., Jr, and Robinson, M.K., 1989. Correlation between unconfined compressive and point load strengths for Appalachian rocks.
- Van der Schrier, J., 1988. The block punch index test. Bulletin of IAEG, 38 (1), 121–126.
- Wilson, M. and Wilson, L., 2014. Clay mineralogy and shale instability: an alternative conceptual analysis. Clay Minerals, 49 (2), 127–145. doi:https://doi.org/10.1180/claymin.2014.049.2.01