References
- Bai, J.B., et al., 2015. Roof deformation, failure characteristics, and preventive techniques of gob-side entry driving heading adjacent to the advancing working face. Rock Mechanics and Rock Engineering, 48 (6), 2447–2458. doi:https://doi.org/10.1007/s00603-015-0713-2
- Bednarek, L. and Majcherczyk, T., 2020. An analysis of rock mass characteristics which influence the choice of support. Geomechanics and Engineering, 21 (4), 371–377. doi:https://doi.org/10.12989/gae.2020.21.4.371
- Chang, J., et al., 2005. High water content material based on ba-bearing sulphoaluminate cement. Journal of Wuhan University of Technology-materials Science Edition, 20 (3), 88–90.
- Chang, Q.L., et al. 2014. Implementation of paste backfill mining technology in Chinese coal mines. Scientific World Journal. Article ID 821025. doi:https://doi.org/10.1155/2014/821025
- Chen, S.J., et al., 2019. Simulation study on effects of loading rate on uniaxial compression failure of composite rock-coal layer. Geomechanics and Engineering, 17 (4), 333–342. doi:https://doi.org/10.12989/gae.2019.17.4.333
- Feng, G.M., Research on the super high-water packing material and filling mining technology and their application, PhD Thesis, China University of Mining and Technology, Xuzhou, Jiangsu, China, 2009.
- Hanson, J.L., Edil, T.B., and Yesiller, N., Thermal properties of high water content materials, Symposium on Geotechnics of High Water Content Materials, Memphis, TN, 1999.
- Hu, G.Z., He, W.R., and Lan, C.J., 2018. Sealing behavior and flow mechanism of expandable material slurry with high water content for sealing gas drainage boreholes. Geofluids. Article ID 2954306, 15. doi:https://doi.org/10.1155/2018/2954306.
- Li, M., et al., 2019. Effects of particle sizes on compressive deformation and particle breakage of gangue used for coal mine goaf backfill. Powder Technology, 360, 493–502. doi:https://doi.org/10.1016/j.powtec.2019.10.075
- Li, M., et al., 2020a. Testing and modeling creep compression of waste rocks for backfill with different lithologies. International Journal of Rock Mechanics and Mining Sciences, 125. Article ID 104170 . doi: https://doi.org/10.1016/j.ijrmms.2019.104170.
- Li, T., et al., 2020b. The gob-side entry retaining with the high-water filling material in Xin’an coal mine. Geomechanics and Engineering, 22 (6), 541–552. doi:https://doi.org/10.12989/gae.2020.22.6.541
- Li, X.L. and Liu, C.W., 2018. Mechanical properties and damage constitutive model of high water material at different loading rates. Advanced Engineering Materials, 20 (6). Article ID 1701098. doi: https://doi.org/10.1002/adem.201701098
- Pasten, F., Videla, A., and Munoz, J., 2017. Structured water balance methodology for water consumption estimation for a mining operation in central Chile: seasonal temperature effect on evaporation, seepage and water demand. International Journal of Mining, Reclamation and Environment, 31 (7), 488–504. doi:https://doi.org/10.1080/17480930.2016.1184526
- Sismanoglu, S., et al., 2017. The synthesis and mechanical characterisation of laminated hybrid-epoxy matrix composites. International Journal of Mining, Reclamation and Environment, 31 (6), 382–388. doi:https://doi.org/10.1080/17480930.2017.1326076
- Wang, Z., Hu, J.H., and Yan, L.L., Experimental study on solidified sludge with high water content, International Conference on Green Building, Materials and Civil Engineering, Shangri La, Peoples R China, 2011.
- Wu, K., et al., 2020a. Mechanical analysis of tunnels supported by yieldable steel ribs in rheological rocks. Geomechanics and Engineering, 19 (1), 61–70. doi:https://doi.org/10.12989/gae.2019.19.1.061
- Wu, N., et al., 2020b. Energy evolution characteristics of coal specimens with preformed holes under uniaxial compression. Geomechanics and Engineering, 20 (1), 55–66. doi:https://doi.org/10.12989/gae.2020.20.1.055
- Xia, J.W., Su, Q., and Liu, D.D., 2017. Optimal gypsum-lime content of high water material. Materials Letters, 215, 284–287. doi:https://doi.org/10.1016/j.matlet.2017.12.050
- Xie, H. and Liu, C.W., 2013. Analysis on influence of moisture content on deformation characteristics of the high-water-content material stone. Advanced Engineering Sciences, 45 (S1), 1–6. doi:https://doi.org/10.15961/j.jsuese.2013.s1.001
- Xie, S.R., et al., 2020. Failure analysis and control mechanism of gob-side entry retention with a 1.7-m flexible-formwork concrete wall: a case study. Engineering Failure Analysis, 117 (2020), 104816. doi:https://doi.org/10.1016/j.engfailanal.2020.104816
- Yu, W.J., et al., 2019. Deformation characteristics and determination of optimum supporting time of alteration rock mass in deep mine. KSCE Journal of Civil Engineering, 11 (23), 4921–4932. doi:https://doi.org/10.1007/s12205-019-0365-y
- Yu, W.J. and Liu, F.F., 2018. Stability of close chambers surrounding rock in deep and comprehensive control technology. Advances in Civil Engineering. Article ID 6275941, 18. doi:https://doi.org/10.1155/2018/6275941.
- Zhang, F.T., et al., 2020. Post-peak mechanical characteristics of the high-water material for backfilling the gob-side entry retaining: from experiment to field application. Arabian Journal of Geosciences, 13 (11). Article ID 386. doi: https://doi.org/10.1007/s12517-020-05369-9
- Zhang, J.X., et al., 2015. Surface subsidence control theory and application to backfill coal mining technology. Environmental Earth Sciences, 74 (2), 1439–1448. doi:https://doi.org/10.1007/s12665-015-4133-0
- Zhang, Y., et al., 2017. Experimental research on influence of water cement ratio on mechanical characteristics of the high-water-content material. Advanced Engineering Sciences, 49, 115–120+127. doi:https://doi.org/10.15961/j.jsuese.201600956
- Zhang, Y.H., et al., 2018. Effects of lithium carbonate on performances of sulphoaluminate cement-based dual liquid high water material and its mechanisms. Construction and Building Materials, 161, 374–380. doi:https://doi.org/10.1016/j.conbuildmat.2017.11.130
- Zhu, W.B., et al., 2017. Pier-column backfill mining technology for controlling surface subsidence. International Journal of Rock Mechanics and Mining Sciences, 96, 58–65. doi:https://doi.org/10.1016/j.ijrmms.2017.04.014
- Zuo, J.P., et al., 2018. Influence of different W/C on the performances and hydration progress of dual liquid high water backfilling material. Construction and Building Materials, 190, 910–917. doi:https://doi.org/10.1016/j.conbuildmat.2018.09.146