References
- Anderson, W.F., et al., 2011. Laboratory-scale tests on anchored retaining walls supporting backfill with surface loading. Canadian Geotechnical Journal, 19 (3), 213–224. doi:https://doi.org/10.1139/t82-028.
- Bhattacharyya, S.K., et al., 2013. Demolition wastes as raw materials for sustainable construction products. CSIR-CBRI News Letter, 33, 1–2.
- Bianchini, G., et al., 2005. Recycling of construction and demolition waste materials: a chemical–mineralogical appraisal. Waste Management, 25 (2), 149–159. doi:https://doi.org/10.1016/j.wasman.2004.09.005.
- Chen, J.J., Li, M.G., and Wang, J.H., 2017. Active earth pressure against rigid retaining walls subjected to confined cohesionless soil. International Journal of Geomechanics, 17 (6), 06016041. doi:https://doi.org/10.1061/(ASCE)GM.1943-5622.0000855.
- Chung, S.S. and Lo, C.W., 2003. Evaluating sustainability in waste management: the case of construction and demolition, chemical and clinical wastes in Hong Kong. Resources, Conservation and Recycling, 37 (2), 119–145. doi:https://doi.org/10.1016/S0921-3449(02)00075-7.
- Coulomb, C.A., 1776. Essai sur une application des regles des maximis et minimis a quelques problemes de statique relatifs a l’architecture. Memoires de l’Academie Royale pres Divers Savants, p. 7.
- Dave, T.N. and Dasaka, S.M., 2012. Transition of Earth Pressure on rigid retaining walls subjected to surcharge loading. International Journal of Geotechnical Engineering, 6, 427–435. doi:https://doi.org/10.3328/IJGE.2012.06.04.427-435
- Dave, T.N. and Dasaka, S.M., 2014. Surcharge induced earth pressure reduction on rigid retaining wall using EPS Geofoam. Tunneling and Underground Construction, 242, 836–844. GSP 242 ASCE.
- Fan, C.C. and Fang, Y.S., 2010. Numerical solution of active earth pressures on rigid retaining walls built near rock faces. Computers and Geotechnics, 37, 1023–1029. doi:https://doi.org/10.1016/j.compgeo.2010.08.004
- Frydman, S. and Keissar, I., 1987. Earth pressure on retaining walls near rock faces. Journal of Geotechnical Engineering, 113 (6), 586–599. doi:https://doi.org/10.1061/(ASCE)0733-9410(1987)113:6(586).
- Gade, V.K. and Dasaka, S.M., 2019. Influence of contacting material on calibration response of diaphragm earth pressure cells. Indian Geotechnical Journal. doi:https://doi.org/10.1007/s40098-019-00363-9.
- Greco, V.R., 2013. Active thrust on retaining walls of narrow backfill width. Computers and Geotechnics, 50, 66–78. doi:https://doi.org/10.1016/j.compgeo.2012.12.007
- Harmon, K., 2014. Engineering properties of structural lightweight concrete. Available from: http://www.stalite.com/uploads/EngineeringProperties.pdf [Accessed 23 May 2019].
- Huang, W.L., et al., 2002. Recycling of construction and demolition waste via a mechanical sorting process. Resources, Conservation and Recycling, 37 (1), 23–37. doi:https://doi.org/10.1016/S0921-3449(02)00053-8.
- Jaky, J., 1948. Pressure in silos, 2nd International Conference on Soil Mechanics and Foundation Engineering, , 1 London. 103–107.
- Juran, B.I. and Christopher, B., 1989. Laboratory model study on geosynthetic reinforced soil retaining walls. Journal of Geotechnical Engineers ASCE, 115 (7), 905–926. doi:https://doi.org/10.1061/(ASCE)0733-9410(1989)115:7(905).
- Lawson, C.R. and Yee, T.W., 2005. Reinforced soil retaining walls with constrained reinforced fill zones. Proceedings of GeoFrontiers, ASCE, Reston, VA, 2721–2734.
- Lee, J., et al., 1999. Shredded tires and rubber-sand as lightweight backfill. Journal of Geotechnical and Geoenvironmental Engineering, 125 (2), 132–141. doi:https://doi.org/10.1061/(ASCE)1090-0241(1999)125:2(132).
- Leshchinsky, D., Hu, Y., and Han, J., 2004. Limited reinforced space in segmental retaining walls. Geotextiles and Geomembranes, 22, 543–553. doi:https://doi.org/10.1016/j.geotexmem.2004.04.002
- Lin, Y., et al., 2010. Engineering behaviors of reinforced gabion retaining wall based on laboratory test. Journal of Central South University of Technology, 17 (6), 1351–1356. doi:https://doi.org/10.1007/s11771-010-0641-y.
- Madhavi Latha, G. and Manju, G.S., 2016. Seismic response of geocell retaining walls through shaking table tests. International Journal of Geosynthetics and Ground Engineering, 2 (7), 1–15. doi:https://doi.org/10.1007/s40891-016-0048-4.
- Meyer, C., 2004. Concrete materials and sustainable development in the USA. Structural Engineering International, 14, 203–207. doi:https://doi.org/10.2749/101686604777963757
- Misapor, 2014. Technical data international. Available from: http://www.archiproducts.com/en/products/13344/foam-glass-gravel-misapor-misapor.html [Accessed 23 May 2019].
- Mittal, S., Garg, K.G., and Saran, S., 2006. Analysis and design of retaining wall having reinforced cohesive frictional backfill. Geotechnical and Geological Engineering, 24 (3), 499–522. doi:https://doi.org/10.1007/s10706-004-5153-9.
- Morris, D.V. and Delphia, J.G., 1999. Specifications for backfill of reinforced-earth retaining walls. Texas Transportation Institute, FHWA/TX-99/1431-S.
- Muktinutalapati, J., GuhaRay, A., and Kar, A., 2019. Experimental analysis of strength and deformation behavior of soils reinforced with building-derived materials. Indian Geotechnical Journal. doi:https://doi.org/10.1007/s40098-019-00367-5.
- Murali Krishna, A. and Madhavi Latha, G., 2012. Modelling the dynamic response of wrap-faced reinforced soil retaining walls. International Journal of Geomechanics, 12 (4), 439–450. doi:https://doi.org/10.1061/(ASCE)GM.1943-5622.0000128.
- Provis, J.L. and van Deventer, J.S.J., 2009. Geopolymers: structure, processing, properties and industrial applications. Boca Raton, FL: CRC Press. Oxford: Woodhead.
- Rao, A., Jha, K.N., and Misra, S., 2007. Use of aggregates from recycled construction and demolition waste in concrete. Resources, Conservation and Recycling, 50 (1), 71–81. doi:https://doi.org/10.1016/j.resconrec.2006.05.010.
- Rathje, E., Trejo, D., and Folliard, K., 2006. Use of recycled asphalt pavement and crushed concrete as backfill for mechanically stabilized earth retaining walls. Austin, TX: Center for Transportation Research, the University of Texas at Austin, Research Report 0-4177-S.
- Reddy, S.B. and Krishna, A.M., 2015. Recycled tire chips mixed with sand as lightweight backfill material in retaining wall applications: an experimental investigation. International Journal of Geosynthetics and Ground Engineering, 1 (31), 1–11. doi:https://doi.org/10.1007/s40891-015-0036-0.
- Selig, E., 1980. Soil stress gauge calibration. Geotechnical Testing Journal, 3 (4), 153–158.
- Senthil, K., Iqbal, M.A., and Kumar, A., 2014. Behavior of cantilever and counterfort retaining walls subjected to lateral earth pressure. International Journal of Geotechnical Engineering, 8 (2), 168–181. doi:https://doi.org/10.1179/1938636213Z.00000000075.
- Sivakugan, N. and Das, B.M., 2010. Geotechnical engineering: a practical problem solving approach. Eureka Series, J. USA: Ross Publishing.
- Stipho, A.S., 1988. Model test of reinforced earth retaining wall. In: International Conference on Case Histories in Geotechnical Engineering, Missouri University of Science and Technology, 39.
- Suits, L.D., et al., 2005. Laboratory calibration of earth pressure cells. Geotechnical Testing Journal, 28 (2), 12089. doi:https://doi.org/10.1520/GTJ12089.
- Suluguru, A.K., et al., 2017. Experimental studies on the microstructural, physical and chemical characteristics of building derived materials to assess their suitability in ground improvement. Construction and Building Materials, Elsevier, 156, 921–932. doi:https://doi.org/10.1016/j.conbuildmat.2017.09.058
- Symons, I.F. and Clayton, C.R.I., 1992. Earth pressures on backfilled retaining walls. Ground Engineering, 25 (3), 26–34.
- Take, W. and Valsangkar, A., 2001. Earth pressures on unyielding retaining walls of narrow backfill width. Canadian Geotechnical Journal, 38 (6), 1220–1230. doi:https://doi.org/10.1139/t01-063.
- Tam, V.W.Y. and Tam, C.M., 2006. A review on the viable technology for construction waste recycling. Resources, Conservation and Recycling, 47 (3), 209–221. doi:https://doi.org/10.1016/j.resconrec.2005.12.002.
- Wailer, W.A. and Kulhawy, F.H., 1982. Factors affecting stress cell measurements in soil. Journal of the Geotechnical Engineering Division, 108 (12), 1529–1548. doi:https://doi.org/10.1061/AJGEB6.0001393.
- Yang, K.H., Ching, J., and Zornberg, J., 2011. Reliability-based design for external stability of narrow mechanically stabilized earth walls: calibration from centrifuge tests. Journal Geotechnical and Geoenvironmental Engineering, 137 (3), 239–253. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0000423.
- Yang, M. and Tang, X., 2017. Rigid retaining walls with narrow cohesionless backfills under various wall movement modes. International Journal of Geomechanics, 17 (11), 1–11. ASCE 04017098.