Evaluation of the mechanical behaviour of cement - stabilised collapsible soils treated with natural fibres

References

• Ahmadi Chenarboni, H., et al., 2021. The effect of zeolite and cement stabilization on the mechanical behavior of expansive soils. Construction and Building Materials, 272, 121630. doi:10.1016/j.conbuildmat.2020.121630.
   Web of Science ®Google Scholar
• Almajed, A., Srirama, D., and Moghal, A.A.B., 2021. Response surface method analysis of chemically stabilized fiber-reinforced soil. Materials, 14 (6), 1535. doi:10.3390/ma14061535.
   PubMed Web of Science ®Google Scholar
• ASTM D2166, 2016. Standard test method for unconfined compressive strength of cohesive soil. West Conshohocken, PA: ASTM – American Society for Testing and Materials.
   Google Scholar
• ASTM D2487, 2017. Standard practice for classification of soils for engineering purposes (unified soil classification system). West Conshohocken, PA: ASTM International. Available from: www.astm.org.
   Google Scholar
• ASTM D5333, 2003. Standard test method for measurement of collapse potential of soils. In: Annual Book of ASTM Standards. Vol. 04.08, Philadelphia, PA, ASTM, USA. Copyright, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
   Google Scholar
• ASTM D698, 2007. Standard test methods for laboratory compaction characteristics of soil using standard effort (12,400 ft lbf/ft3 (600 kN-m/m3)). Easton, MD: ASTM – American Society for Testing and Materials.
   Google Scholar
• Ayeldeen, M. and Kitazume, M., 2017. Using fiber and liquid polymer to improve the behaviour of cement-stabilized soft clay. Geotextiles and Geomembranes, 45 (6), 592–602. doi:10.1016/j.geotexmem.2017.05.005.
   Web of Science ®Google Scholar
• Aziminezhad, M., Mahdikhani, M., and Memarpour, M.M., 2018. RSM-based modeling and optimization of self-consolidating mortar to predict acceptable ranges of rheological properties. Construction and Building Materials, 189, 1200–1213. doi:10.1016/j.conbuildmat.2018.09.019.
   Web of Science ®Google Scholar
• Bojnourdi, S., et al., 2020. Hydro-mechanical properties of unreinforced and fiber-reinforced used motor oil (UMO)-contaminated sand-bentonite mixtures. Engineering Geology, 279, 105886. doi:10.1016/j.enggeo.2020.105886.
   Web of Science ®Google Scholar
• Gholampour, A. and Ozbakkaloglu, T., 2020. A review of natural fiber composites: properties, modification and processing techniques, characterization, applications. Journal of Materials Science, 55 (3), 829–892. doi:10.1007/s10853-019-03990-y.
   Web of Science ®Google Scholar
• Hammoudi, A., et al., 2019. Comparison of artificial neural network (ANN) and response surface methodology (RSM) prediction in compressive strength of recycled concrete aggregates. Construction and Building Materials, 209, 425–436. doi:10.1016/j.conbuildmat.2019.03.119.
   Web of Science ®Google Scholar
• Hejazi, S.M., et al., 2012. A simple review of soil reinforcement by using natural and synthetic fibers. Construction and Building Materials, 30, 100–116. doi:10.1016/j.conbuildmat.2011.11.045.
   Web of Science ®Google Scholar
• Khodabandeh, M.A., et al., 2020. The effect of acidic and alkaline chemical solutions on the behavior of collapsible soils. Periodica Polytechnica Civil Engineering, 64 (3), 939–950. doi:10.3311/PPci.15643.
   Web of Science ®Google Scholar
• Lang, L., Chen, B., and Chen, B., 2021. Strength evolutions of varying water content-dredged sludge stabilized with alkali-activated ground granulated blast-furnace slag. Construction and Building Materials, 275, 122111. doi:10.1016/j.conbuildmat.2020.122111.
   Web of Science ®Google Scholar
• Lang, L., Duan, H., and Chen, B., 2020a. Experimental investigation on concrete using corn stalk and magnesium phosphate cement under compaction forming technology. Journal of Materials in Civil Engineering, 32 (12), 04020370. doi:10.1061/(asce)mt.1943-5533.0003487.
   Web of Science ®Google Scholar
• Lang, L., Liu, N., and Chen, B., 2020b. Strength development of solidified dredged sludge containing humic acid with cement, lime and nano-SiO2. Construction and Building Materials, 230, 116971. doi:10.1016/j.conbuildmat.2019.116971.
   Web of Science ®Google Scholar
• Langroudi, A.A., 2014. Micromechanics of collapse in loess. PhD thesis in School of Civil Engineering, University of Birmingham, UK.
   Google Scholar
• Liu, C. and Starcher, R.D., 2013. Effects of curing conditions on unconfined compressive strength of cement- and cement-fiber-improved soft soils. Journal of Materials in Civil Engineering, 25 (8), 1134–1141. doi:10.1061/(asce)mt.1943-5533.0000575.
   Web of Science ®Google Scholar
• Liu, G., et al., 2021. Comparison of nanomaterials with other unconventional materials used as additives for soil improvement in the context of sustainable development: a review. Nanomaterials, 11 (1), 1–26. doi:10.3390/nano11010015.
   Web of Science ®Google Scholar
• Long, X., Cai, L., and Li, W., 2019. RSM-based assessment of pavement concrete mechanical properties under joint action of corrosion, fatigue, and fiber content. Construction and Building Materials, 197, 406–420. doi:10.1016/j.conbuildmat.2018.11.157.
   Web of Science ®Google Scholar
• Moradi Moghaddam, H., et al., 2021. Experimental evaluation of the effects of structural parameters, installation methods and soil density on the micropile bearing capacity. International Journal of Civil Engineering, 1–13. doi:10.1007/s40999-021-00629-5.
   Web of Science ®Google Scholar
• Nazari, Z., Tabarsa, A., and Latifi, N., 2021. Effect of compaction delay on the strength and consolidation properties of cement-stabilized subgrade soil. Transportation Geotechnics, 27, 100495. doi:10.1016/j.trgeo.2020.100495.
   Web of Science ®Google Scholar
• Roshani, M.M., et al., 2021. Predicting the effect of fly ash on concrete’s mechanical properties by ann. Sustainability (Switzerland), 13 (3), 1–16. doi:10.3390/su13031469.
   PubMed Web of Science ®Google Scholar
• Salimi, K. and Ghazavi, M., 2019. Soil reinforcement and slope stabilisation using recycled waste plastic sheets. Geomechanics and Geoengineering, 1–12. doi:10.1080/17486025.2019.1683620.
   Google Scholar
• Shirazi, M., Khademalrasoul, A., and Safieddin Ardebili, S.M., 2020. Multi-objective optimization of soil erosion parameters using response surface method (RSM) in the Emamzadeh watershed. Acta Geophysica, 68 (2), 505–517. doi:10.1007/s11600-020-00404-5.
   Web of Science ®Google Scholar
• Tran, K.Q., Satomi, T., and Takahashi, H., 2018. Improvement of mechanical behavior of cemented soil reinforced with waste cornsilk fibers. Construction and Building Materials, 178, 204–210. doi:10.1016/j.conbuildmat.2018.05.104.
   Web of Science ®Google Scholar
• Tran, K.Q., Satomi, T., and Takahashi, H., 2019. Tensile behaviors of natural fiber and cement reinforced soil subjected to direct tensile test. Journal of Building Engineering, 24, 100748. doi:10.1016/j.jobe.2019.100748.
   Web of Science ®Google Scholar
• Wang, D., Du, Y., and Xiao, J., 2019. Shear properties of stabilized loess using novel reactive magnesia-bearing binders. Journal of Materials in Civil Engineering, 31 (5), 04019039. doi:10.1061/(asce)mt.1943-5533.0002662.
   Web of Science ®Google Scholar
• Wani, K.M.N.S. and Mir, B.A., 2020. A comparative laboratory scale study on the effect of waste boulder crusher dust and cement in stabilising marginal sediments. Geomechanics and Geoengineering, 1–12. doi:10.1080/17486025.2020.1827164.
   Google Scholar
• Yaghoubi, M., Shukla, S.K., and Mohyeddin, A., 2018. Effects of addition of waste tyre fibres and cement on the engineering behaviour of Perth sand. Geomechanics and Geoengineering, 13 (1), 42–53. doi:10.1080/17486025.2017.1325941.
   Web of Science ®Google Scholar
• Yokoyama, S. and Matsumura, Y., 2008. The Asian biomass handbook: a guide for biomass production and utilization. The Japan Institute of Energy, Entrusted by the Ministry of Agriculture, Forestry, and Fisheries of Japan. http://www.build-a-biogas-plant.com/PDF/AsianBiomassHandbook2008.pdf
   Google Scholar