82
Views
0
CrossRef citations to date
0
Altmetric
Research Articles

Roles of ageing on the physical, chemical and mechanical parameters of a prototype municipal solid waste

, , , &
Pages 318-334 | Received 20 Dec 2022, Accepted 01 Sep 2023, Published online: 14 Sep 2023

References

  • Abreu, A.E.S., Vilar, O.M., 2017. Influence of composition and degradation on the shear strength of municipal solid waste. Waste Management, 68 (10), 263–274. doi:10.1016/j.wasman.2017.05.038.
  • Akbari, I., Ajdari, M., and Shafiee, A., 2022. Mechanical properties of landfill components under low to medium stress levels. Bulletin of Engineering Geology and the Environment, 81 (9), 1–17. doi:10.1007/s10064-022-02835-4.
  • ASTM D3080, 2003. Standard test method for direct shear test of soils under consolidated drained conditions ASTM annual book of standards. In Vol. 4.08, ASTM International, Philadelphia, PA.
  • ASTM D6913-04. 2004. Standard test methods for particle-size distribution (gradation) of soils using sieve analysis. In ASTM Annual Book of Standards, Vol. 4.08, ASTM International. Philadelphia, PA.
  • Bareither, C.A., et al., 2020. Hydraulic and mechanical behavior of municipal solid waste and high-moisture waste mixtures. Waste Management, 105, 540–549. doi:10.1016/j.wasman.2020.02.030
  • Bareither, C.A., Benson, C.H., and Edil, T.B., 2012. Effects of waste composition and decomposition on the shear strength of municipal solid waste. Journal of Geotechnical and Geoenvironmental Engineering, 138 (10), 1161–1174. doi:10.1061/(ASCE)GT.1943-5606.0000702.
  • Bray, J.D., et al., 2009. Shear strength of municipal solid waste. Journal of Geotechnical and Geoenvironmental Engineering, 135 (6), 709–722. doi:10.1061/(ASCE)GT.1943-5606.0000063
  • Caicedo, B., et al., 2002a. Geomechanical properties of municipal solid waste in doña Juana sanitary landfill. In Proceedings 4th International Congress on Environmental Geotechnics, Rio de Janeiro: Vol.1, 177–182.
  • Caicedo, B., et al., 2002b. Geomechanical properties of municipal solid waste in doña Juana sanitary landfill. In Proceedings 4th International Congress on Environmental Geotechnics, Rio de Janeiro: Vol.1, 177–182.
  • Castelli, F. and Maugeri, M., 2014. Mechanical properties of municipal solid waste by SDMT. Waste Management, 34 (2), 256–265. doi:10.1016/j.wasman.2013.10.026.
  • Chen, Y.M., et al., 2009. Aging and compressibility of municipal solid wastes. Waste Management, 29 (1), 86–95. doi:10.1016/j.wasman.2008.02.024.
  • Dehdari, V., Ajdari, M., and Rostami, A., 2021. Experimental study on shear strength parameters of a municipal solid waste employing a large direct shear apparatus. Geomechanics and Geoengineering, an International Journal, Taylor and Francis, 17 (4), 1184–1199. Published online. doi:10.1080/17486025.2021.1928763.
  • Dixon, N. and Langer, U., 2006. Development of a MSW classification system for the evaluation of mechanical properties. Waste Management, 26 (3), 220–232. doi:10.1016/j.wasman.2005.02.018.
  • Edincliler, A., Benson, C.H., and Edil, T.B. 1996. Shear strength of municipal solid waste. Interim Report – Year 1. Madison: Department of Civil and Environmental Engineering, University of Wisconsin. Interim Report – Year 1.07.019.
  • Gabr, M.A. and Valero, S.N., 1995. Geotechnical properties of municipal solid waste. Geotechnical Testing Journal, 18 (2), 241–254. doi:10.1520/GTJ10324J.
  • Gotteland, P., Gachet, C., and Vuillemin, M., 2001. Mechanical study of a municipal solid waste landfill. In Proceedings Sardinia ’01, Eighth International Waste Management and Landfill Symposium, Cagliari, Italy: 425–433.
  • Gotteland, P., et al., 2002. On site determination of geomechanical characteristics of waste. In Proceedings GeoEng 2000, Australia: The Institute of Engineers, Published on CD.
  • Grisolia, M., Napoleoni, Q., and Tancredi, G., 1995. Contribution to a technical classification of MSW. 5th International Landfill Symposium, S. Margherita di Pula, Cagliari, Italy: CISA. 703–710.
  • Harris, J.M., et al., 2006. Shear strength of degraded reconstituted municipal solid waste. Geotechnical Testing Journal, 29 (2), 1–8. doi:10.1520/GTJ14089.
  • Hossain, M.S., Penmethsa, K.K., and Hoyos, L., 2009. Permeability of solid waste in bioreactor landfill with degradation. Geotechnical and Geological Engineering, 27 (1), 43–51. doi:10.1007/s10706-008-9210-7.
  • Houston, W.N., et al., 1995. In-situ testing methods for dynamic properties of MSW landfills. Geotechnical Special Publication, ASCE, 54, 73–82.
  • Howland, J.D. and Landva, A.O., 1993. Stability analysis of a municipal solid waste landfill. In: Stability and performance of slopes and embankments II, ASCE. 1216–1231.
  • Jessberger, H.L., Sylwasschy, O., and Kockel, R., 1995. Investigation of waste-body- behaviour and waste-structure-interaction. In 5th International Landfill Symposium, Sardinia, Italy: CISA. 731–743.
  • Jones, R., Taylor, D., and Dixon, N., 1997. Shear strength of waste and its use in landfill stability analysis. In: Proceedings of the Conference on Geo-environmental Engineering, University of Wales, Cardiff, 343–350.
  • Kavazanjian, E., 1995. Evaluation of MSW properties for seismic analysis. Geotechnical Special Publication, ASCE, 46, 1126–1141.
  • Kavazanjian, E., (2001). “Mechanical properties of MSW.” In 8th International Waste Management and Landfill Symposium, S. Margherita di Pula, Cagliari, Italy: 415–424.
  • Kavazanjian, E.J., Matasovic, N., and Bachus, R.C., 1999. Large-diameter static and cyclic laboratory testing of municipal solid waste. 7th International Landfill Symposium, S. Margherita di Pula, Cagliari, Italy, 437–444.
  • Kölsch, F., 1996. The influence of fibrous constituents on shear strength of municipal solid waste. Doctoral dissertation, Ph.D. Thesis. Leichtweiss-Institut, Technische Universität Braunschweig. Germany.
  • Komilis, D.P., Ham, R.K., and Stegmann, R., 1999. The effect of landfill design and operation practices on waste degradation behavior: a review. Waste Management & Research, 17 (1), 20–26. doi:10.1177/0734242X9901700104.
  • Landva, A.O. and Clark, J.I., 1986. Geotechnical testing of waste fill. In Proceedings, 39th Canadian Geotechnical Conference, Ottawa, Ontario: 3714385.
  • Landva, A.O. and Clark, J.I., 1990. “Geotechnics of waste fill - theory and practice. In ASTM STP 1070.
  • Langer, U., 2005. Shear and compression behaviour of undegraded municipal solid waste. PhD thesis. Loughborough University.
  • Lavigne, F., et al., 2014. The 21 February 2005, catastrophic waste avalanche at Leuwigajah dumpsite, Bandung, Indonesia. Geoenvironmental Disasters, 1 (1), 1–12.
  • Manassero, M., Van Impe, W.F., and Bouazza, A. (1997) Waste disposal and containment. In: Proceedings of the 2nd International Congress on Environmental Geotechnics. Osaka, 3, pp. 1425–1474.
  • Machado, S.L., et al., 2010. Evaluation of the geotechnical properties of MSW in two Brazilian landfills. Waste Management, 30 (12), 2579–2591. doi:10.1016/j.wasman.2010.07.019.
  • Machado, S.L., Vilar, O.M., and Carvalho, M.F., 2008. Constitutive model for long term municipal solid waste mechanical behavior. Computers and Geotechnics, 35 (5), 775–790. doi:10.1016/j.compgeo.2007.11.008.
  • Mazzucato, A., Simonini, P., and Colombo, S., 1999. Analysis of block slide in a MSW landfill. In Proceedings 7th International Waste management and Landfill Symposium, Sardinia, Italy.
  • Monghassem, M., et al., 2021. Effects of suction and drying–wetting cycles on shearing response of adobe. Journal of Materials in Civil Engineering, 33 (7), 04021173.
  • Machado, S.L., Carvalho, M.F., and Vilar, O.M., 2002. Constitutive model for municipal solid waste. Journal of Geotechnical and Geoenvironmental Engineering, 128 (11), 940–995.
  • Oweis, I.S., 1993. Stability of landfills. In: Geotechnical practice for waste disposal. Boston, MA: Springer US, 244–268. doi:10.1007/978-1-4615-3070-1_11.
  • Pelkey, S.A., Valsangkar, A.J., and Landva, A., 2001. Shear displacement dependent strength of municipal solid waste and its major constituent. Geotechnical Testing Journal, 24 (4), 381–390. doi:10.1520/GTJ11135J.
  • Pereira, A.G.H., Sopena, L., and Mateos, T.G., 2002. Compressibility of a municipal solid waste landfill. In Proceedings of the Fourth International Congress on Environmental Geotechnics, Brazil: 201–206.
  • Pulat, H.F. and Yukselen-Aksoy, Y., 2019. Compressibility and shear strength behavior of fresh and aged municipal solid wastes. Environmental Geotechnics, doi: 10.1680/jenge.18.00019.
  • Pulat, H.F. and Yukselen-Aksoy, Y., 2017. Factors affecting the shear strength behavior of municipal solid wastes. Waste Management, 69, 215–224. doi:10.1016/j.wasman.2017.08.030
  • Ramaiah, B.J. and Ramana, G.V., 2017. Study of stress-strain and volume change behavior of emplaced municipal solid waste using large-scale triaxial testing. Waste Management, 63, 366–379. doi:10.1016/j.wasman.2017.01.027
  • Reddy, K., et al., 2008. Geotechnical properties of fresh municipal solid waste at Orchard Hills landfill. Waste Management, 29 (2), 952–959. USA. doi:10.1016/j.wasman.2008.05.011.
  • Reddy, K.R., et al., 2011. Geotechnical properties of municipal solid waste at different phases of biodegradation. Waste Management, 31 (11), 2275–2286. doi:10.1016/j.wasman.2011.06.002.
  • Sadek, S., et al., 1999. Geotechnical properties of decomposed solid waste materials. In: Proceedings of the International Conference on Solid Waste Technology and Management, Chester, PA: Widener University, School of Engineering, 350–357.
  • Salim, A.A., Mohammed, Z.B., and Fattah, M.Y., 2022. Influence of adding plant fly ash on the geotechnical properties and pollution of sanitary landfill soil. Engineering and Technology Journal, 40 (11), 1385–1398. doi:10.30684/etj.2022.132687.1136.
  • Shariatmadari, N., Sadeghpour, A.H., and Razaghian, F., 2014. Effects of aging on shear strength behavior of municipal solid waste. International Journal of Civil Engineering, 12, 226–237.
  • Shehab, E.Q., Mohammed, Z.B., and Fattah, M.Y., 2021. Investigation of characteristics landfill leachate using large scale lysimeter under anaerobic conditions. Journal of University of Shanghai for Science and Technology, 23 (1), 70–81. doi:10.51201/jusst12537.
  • Siegel, R.A., Robertson, R.J., and Anderson, D.G., 1990. Slope stability investigations at a landfill in southern California, in: geotechnics of waste fills—theory and practice. ASTM International.
  • Singh, M.K., 2008. Characterization of stress-deformation behaviour of municipal solid waste. Ph.D. thesis. University of Saskatchewan.
  • Shariatmadari, N., Sadeghpour, H., and Razaghian, F., 2014. Effects of aging on shear strength behavior of municipal solid waste. International Journal of Civil Engineering, 12 (3), 292–303.
  • Stark, T.D., Huvaj-Sarihan, N., and Li, G., 2009. Shear strength of municipal solid waste for stability analyses. Environmental Geology, 57 (8), 1911–1923. doi:10.1007/s00254-008-1480-0.
  • Tchobanoglous, G. and Kreith, F., 2002. Handbook of solid waste management. 2nd ed. New York, The USA: McGraw-Hill Companies, Inc.
  • Thomas, S., et al., 1999. An in-situ waste mechanical experimentation on a French landfill. In Proceedings Sardinia’99, 7th International Waste Management and Landfill Symposium, Italy, 445–452.
  • Turczynski, U., 1988. Geotechnical aspects of building multicomponent-landfills. Ph.D. thesis. Bergakademie, Freiberg (Sachsen). [Germany.]
  • Van Impe, W., 1998. Environmental geotechnics: ITC 5 activities-state of the art. Environmental Geotechnics, 1–4, 1163–1187.
  • Vavilin, V.A., et al., 2004. Modeling solid waste decomposition. Bioresource Technology, 94 (1), 69–81. doi:10.1016/j.biortech.2003.10.034.
  • Vilar, O.M. and Carvalho, M.F., 2004. Mechanical properties of municipal solid waste. Journal of Testing and Evaluation, ASTM, 32 (6), 1–12. doi:10.1520/JTE11945.
  • Withiam, J.L., et al., 1995. Prediction and performance of municipal landfill slope. In: Geoenvironment 2000: characterization, containment, remediation, and performance in environmental geotechnics. ASCE, 1005–1019.
  • Wong, W.W.Y., 2009. Investigation of the geotechnical properties of municipal solid waste as a function of placement conditions. PhD Thesis. California Technology State University. USA.
  • Worrell, W.A. and Vesilind, P.A., 2011. Solid waste engineering. 2nd ed. Toronto, Ontario, Canada: Nelson Education, Ltd.
  • Ximenes, F.A., Gardner, W.D., and Cowie, A.L., 2008. The decomposition of wood products in landfills in Sydney, Australia. Waste Management, 28 (11), 2344–2354. doi:10.1016/j.wasman.2007.11.006.
  • Zekkos, D., et al., 2010. Large-scale direct shear testing of municipal solid waste. Waste Management, 30 (8–9), 1544–1555. doi:10.1016/j.wasman.2010.01.024.
  • Zekkos, D., Grizi, A., and Athanasopoulos, G., 2013. Experimental investigation of the effect of fibrous reinforcement on shear resistance of soil-waste mixtures. Geotechnical Testing Journal, 36 (6), 20120190. doi:10.1520/GTJ20120190.
  • Zhan, T.L., Chen, Y.M., and Ling, W.A., 2008. Shear strength characterization of municipal solid waste at the Suzhou landfill. China Engineering Geology, 97 (3–4), 97–111. doi:10.1016/j.enggeo.2007.11.006.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.