Effect of extrapolation on interpreted capacity and model statistics of steel H-piles

References

• AASHTO. 2014. LRFD Bridge Design Specifications. Washington, DC: AASHTO.
   Google Scholar
• AbdelSalam, S. S., K. W. Ng, S. Sritharan, M. T. Suleiman, and M. Roling. 2012. “Development of LRFD Procedures for Bridge Pile Foundations in Iowa – Volume III: Recommended Resistance Factors with Consideration of Construction Control and Setup.” Report No. IHRB Project TR-584, Iowa Department of Transportation.
   Google Scholar
• AbdelSalam, S. S., S. Sritharan, and M. T. Suleiman. 2010. “Current Design and Construction Practices of Bridge Pile Foundations with Emphasis on Implementation of LRFD.” Journal of Bridge Engineering 15 (6): 749–758. doi: 10.1061/(ASCE)BE.1943-5592.0000118
   Web of Science ®Google Scholar
• Abu-Farsakh, M. Y., Q. Chen, and M. N. Haque. 2013. “Calibration of Resistance Factors for Drilled Shafts for the New FHWA Design Method.” Report No. FHWA/LA.12/495, Louisiana Transportation Research Center.
   Google Scholar
• Abu-Farsakh, M. Y., S. Yoon, and C. Tsai. 2009. “Calibration of Resistance Factors Needed in the LRFD Design of Driven Piles.” Report No. FHWA/LA.09/449, Louisiana Transportation Research Center.
   Google Scholar
• Abu-Farsakh, M. Y., X. Yu, S. Yoon, and C. Tsai. 2010. “Calibration of Resistance Factors Needed in the LRFD Design of Drilled Shafts.” Report No. FHWA/LA.10/470, Louisiana Transportation Research Center.
   Google Scholar
• Abu-Hejleh, N. M., M. Y. Abu-Farsakh, M. T. Suleiman, and C. Tsai. 2015. “Development and Use of High-Quality Databases of Deep Foundation Load Tests.” Journal of the Transportation Research Record 2511: 27–36. doi: 10.3141/2511-04
   Google Scholar
• Allen, T. M. 2013. “AASHTO Geotechnical Design Specification Development in the USA.” In Modern Geotechnical Design Codes of Practice: Implementation, Application and Development, 243–260. Amsterdam: IOS Press.
   Google Scholar
• Borel, S., M. Bustamante, and L. Gianeselli. 2004. “An Appraisal of the Chin Method Based on 50 Instrumented Pile Tests.” Ground Engineering 37 (1): 22–26.
   Google Scholar
• Chin, F. K. 1970. “Estimation of the Ultimate Load of Piles not Carried to Failure.” Proceedings of the 2nd Southeast Asian Conference on Soil Mechanics, 81–90, Southeast Asian Society of Soil Engineering, Singapore.
   Google Scholar
• Ching, J. Y., H.-D. Lin, and M.-T. Yen. 2011. “Calibrating Resistance Factors of Single Bored Piles Based on Incomplete Load Test Results.” Journal of Engineering Mechanics 137 (5): 309–323. doi: 10.1061/(ASCE)EM.1943-7889.0000230
   Web of Science ®Google Scholar
• Davisson, M. T. 1972. “High Capacity Piles.” Proceedings of Soil Mechanics Lecture Series on Innovations in Foundation Construction, 81–112, Illinois section (ASCE), Chicago.
   Google Scholar
• Dithinde, M., K. K. Phoon, M. De Wet, and J. V. Retief. 2011. “Characterization of Model Uncertainty in the Static Pile Design Formula.” Journal of Geotechnical and Geoenvironmental Engineering 137 (1): 70–85. doi: 10.1061/(ASCE)GT.1943-5606.0000401
   Web of Science ®Google Scholar
• Fellenius, B. H. 2019. “Basics of Foundation Design.” Electronic edition. https://www.fellenius.net/papers.html.
   Google Scholar
• Fenton, G. A., F. Naghibi, D. Dundas, R. J. Bathurst, and D. V. Griffiths. 2016. “Reliability-based Geotechnical Design in the 2014 Canadian Highway Bridge Design Code.” Canadian Geotechnical Journal 53 (2): 236–251. doi: 10.1139/cgj-2015-0158
   Web of Science ®Google Scholar
• Golafzani, S. H., R. J. Chenari, and A. Eslami. 2019. “Reliability Based Assessment of Axial Pile Bearing Capacity: Static Analysis, SPT and CPT-based Methods.” Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, in press.
   Google Scholar
• Honjo, Y., T. C. Kieu Le, T. Hara, M. Shirato, M. Suzuki, and Y. Kikuchi. 2009. “Code Calibration in Reliability Based Design Level I Verification Format for Geotechnical Structures.” 2nd International Symposium on Geotechnical Safety and Risk, 435–452. Leiden: CRC Press/Balkema.
   Google Scholar
• Honjo, Y., Y. Kikuchi, and M. Shirato. 2010. “Development of the Design Codes Grounded on the Performance-based Design Concept in Japan.” Soils and Foundations 50 (6): 983–1000. doi: 10.3208/sandf.50.983
   Web of Science ®Google Scholar
• Honjo, Y., and O. Kusakabe. 2002. “Proposal of a Comprehensive Foundation Design Code: Geo-Code 21 ver. 2.” In Foundation Design Codes and Soil Investigation in View of International Harmonization and Performance Based Design, 95–103. Lisse: Balkema.
   Google Scholar
• ISO. 2016. Petroleum and Natural Gas Industries – Specific Requirements for Offshore Structures. Part 4: Geotechnical and Foundation Design Considerations (IS0 19901-4:2016). Geneva, Switzerland: International Organization for Standardization (ISO).
   Google Scholar
• Kulhawy, F. H., and K. K. Phoon. 2002. “Observations on Geotechnical Reliability-based Design Development in North America.” In Foundation Design Codes and Soil Investigation in View of International Harmonization and Performance Based Design, 31–48. Lisse: Balkema.
   Google Scholar
• Kulhawy, F. H., K. K. Phoon, and Y. Wang. 2012. “Reliability-based Design of Foundations – a Modern View.” In Geotechnical Engineering State of the Art and Practice: Keynote Lectures from GeoCongress 2012 (GSP 226), 102–121. Reston, VA: ASCE.
   Google Scholar
• Kyfor, Z. G., A. R. Schnore, T. A. Carlo, and P. F. Baily. 1992. Static Testing of Deep Foundations. Report No. FHWA-SA-91-042. Washington, DC: Federal Highway Administration.
   Google Scholar
• Marcos, M. C. M., Y. J. Chen, and F. H. Kulhawy. 2013. “Evaluation of compression load test interpretation criteria for driven precast concrete pile capacity.” KSCE Journal of Civil Engineering: Geotechnical Engineering 17 (5): 1008–1022.
   Google Scholar
• Motamed, R., S. Elfass, and K. Stanton. 2016. “LRFD Resistance Factor Calibration for Axially Loaded Drilled Shafts in the Las Vegas Valley.” Report No. 515-13-803, Nevada Department of Transportation.
   Google Scholar
• Nagao, T., Y. Watabe, Y. Kikuchi, and Y. Honjo. 2009. Recent revision of Japanese Technical Standard for Port and Harbor Facilities based on a performance based design concept. 2nd International Symposium on Geotechnical Safety & Risk, 39–47. Leiden: CRC Press/Balkema.
   Google Scholar
• Nanazawa, T., T. Kouno, G. Sakashita, and K. Oshiro. 2019. “Development of Partial Factor Design Method on Bearing Capacity of Pile Foundations for Japanese Specifications for Highway Bridges.” Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, in press.
   Google Scholar
• NeSmith, W. M., and T. C. Siegel. 2009. “Shortcomings of the Davisson Offset Limit Applied to Axial Compressive Load Tests on Cast-in-place Piles.” In Contemporary Topics in Deep Foundations (GSP 185), 568–574. Reston, VA: ASCE.
   Google Scholar
• Ng, T., and S. Fazia. 2012. “Development and Validation of a Unified Equation for Drilled Shaft Foundation Design in New Mexico.” Report No. NM10MSC-01, New Mexico Department of Transportation.
   Google Scholar
• Ng, K. W., S. Sritharan, and J. C. Ashlock. 2014. “Development of Preliminary Load and Resistance Factor Design of Drilled Shafts in Iowa.” Report No. InTrans Project 11-410, Iowa Department of Transportation.
   Google Scholar
• Ng, K. W., M. T. Suleiman, M. Roling, S. S. AbdelSalam, and S. Sritharan. 2011. “Development of LRFD Design Procedures for Bridge Piles in Iowa. Vol. II: Field Testing of Steel Piles in Clay, Sand, and Mixed Soils and Data Analysis.” Report No. IHRB Project TR-583, Iowa Department of Transportation.
   Google Scholar
• Paikowsky, S. G., B. Birgisson, M. McVay, T. Nguyen, C. Kuo, G. Baecher, A. Ayyub, et al. 2004. Load and Resistance Factor Design (LRFD) for Deep Foundations. NCHRP Report 507. Washington, DC: Transportation Research Board.
   Google Scholar
• Paikowsky, S. G., and T. A. Tolosko. 1999. “Extrapolation of Pile Capacity from Non-failed Load Tests.” Publication No. FHWA-RD-99-170, Federal Highway Administration (FHWA).
   Google Scholar
• Phoon, K. K., and C. Tang. 2019. “Characterization of Geotechnical Model Uncertainty.” Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards 13 (2): 101–130.
   Web of Science ®Google Scholar
• Roling, M. J., S. Sritharan, and M. T. Suleiman. 2011. “Development of LRFD Procedures for Bridge Pile Foundations in Iowa – Volume I: An Electronic Database for Pile Load Tests in Iowa (PILOT).” Report No. IHRB Project TR-573, Iowa Department of Transportation. June 2010.
   Google Scholar
• Salgado, R., S. I. Woo, and D. Kim. 2011. “Development of Load and Resistance Factor Design for Ultimate and Serviceability Limit States of Transportation Structure Foundations.” Report No. FHWA/IN/JTRP-2011/03, Indiana Department of Transportation.
   Google Scholar
• Seo, H., R. B. Moghaddam, J. G. Surles, and W. D. Lawson. 2015. “Implementation of LRFD Geotechnical Design for Deep Foundations Using Texas Penetrometer (TCP) Test.” Report No. FHWA/TX-16/5-6788-01-1, Texas Department of Transportation.
   Google Scholar
• Tang, C., and K. K. Phoon. 2018. “Evaluation of Model Uncertainties in Reliability-based Design of Steel H-piles in Axial Compression.” Canadian Geotechnical Journal 55 (11): 1513–1532. doi: 10.1139/cgj-2017-0170
   Web of Science ®Google Scholar
• Zhang, L. M. 2004. “Reliability Verification Using Proof Pile Load Tests.” Journal of Geotechnical and Geoenvironmental Engineering 130 (11): 1203–1213. doi: 10.1061/(ASCE)1090-0241(2004)130:11(1203)
   Web of Science ®Google Scholar