References
- AkbarzadehBengar, H., Shahmansouri, A. A., AkkasZangebariSabet, N., Kabirifar, K., & Tam, W. Y. V. (2020). Impact of elevated temperatures on the structural performance of recycled rubber concrete: Experimental and mathematical modeling. Construction and Building Materials, 255, 119374. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2020.119374
- Altamirano-Medina, H., Davies, M., Ridley, I., Mumovic, D., & Oreszczyn, T. (2009). Guidelines to avoid mould growth in buildings. Advances in Building Energy Research, 3(1), 221–235. https://doi.org/https://doi.org/10.3763/aber.2009.0308
- Amiri Fard, F., Jafarpour, A., & Nasiri, F. (2019). Comparative assessment of insulated concrete wall technologies and wood-frame walls in residential buildings: A multi-criteria analysis of hygrothermal performance, cost, and environmental footprints. Advances in Building Energy Research, 1–33. https://doi.org/https://doi.org/10.1080/17512549.2019.1600583
- Antretter, F., Sauer, F., Schopfer, T., & Holm, A. (2011). Validation of a hygrothermal whole building simulation software. In Proc. of Building Simulation 2011, 12th Conference of International Building Performance Simulation Association, Sydney, 1694–1701.
- ASHRAE Standard 160. (2009). Criteria for moisture-control design analysis in buildings.
- AzariJafari, H., Shekarchi, M., Berenjian, J., & Ahmad, B. (2015). Enhancing workability retention of concrete containing natural zeolite by superplasticizers’ combination. Special Publication, 302, 416–424.
- Berardi, U., GhaffarianHoseini, A., & GhaffarianHoseini, A. (2014). State-of-the-art analysis of the environmental benefits of green roofs. Applied Energy, 115, 411–428. https://doi.org/https://doi.org/10.1016/j.apenergy.2013.10.047
- Berndtsson, J. C., Emilsson, T., & Bengtsson, L. (2006). The influence of extensive vegetated roofs on runoff water quality. Science of the Total Environment, 48–63. https://doi.org/https://doi.org/10.1016/j.scitotenv.2005.02.035
- Bianchini, F., & Hewage, K. (2012). How ‘green’ are the green roofs? Lifecycle analysis of green roof materials. Building and Environment, 48, 57–65. https://doi.org/https://doi.org/10.1016/j.buildenv.2011.08.019
- Budaiwi, I., & Abdou, A. (2013). The impact of thermal conductivity change of moist fibrous insulation on energy performance of buildings under hot-humid conditions. Energy and Buildings, 60, 388–399. https://doi.org/https://doi.org/10.1016/j.enbuild.2013.01.035
- Burch, D. M., & Chi, J. (1997). MOIST −A PC program for predicting heat and moisture transfer in building envelopes, National Institute of Standards and Technology (NIST), Gaithersburg, USA, Special Publication 917.
- CABR. (2014). Thermal design code for civil building (GB 50176-201X). China Building Industry Press.
- Cascone, S. (2019). Green roof design: State of the art on technology and materials. Sustainability (Switzerland), 11(11), 1–27. https://doi.org/https://doi.org/10.3390/su11113020
- Cascone, S., Catania, F., Gagliano, A., & Sciuto, G. (2018). A comprehensive study on green roof performance for retrofitting existing buildings. Building and Environment, 136, 227–239. https://doi.org/https://doi.org/10.1016/j.buildenv.2018.03.052
- Chenani, S. B., Lehvävirta, S., & Häkkinen, T. (2015). Life cycle assessment of layers of green roofs. Journal of Cleaner Production, 90, 153–162. https://doi.org/https://doi.org/10.1016/j.jclepro.2014.11.070
- Coma, J., Pérez, G., Castell, A., Solé, C., & Cabeza, L. F. (2014). Green roofs as passive system for energy savings in buildings during the cooling period: Use of rubber crumbs as drainage layer. Energy Efficiency, 7(5), 841–849. https://doi.org/https://doi.org/10.1007/s12053-014-9262-x
- Coma, J., Pérez, G., Solé, C., Castell, A., & Cabeza, L. F. (2016). Thermal assessment of extensive green roofs as passive tool for energy savings in buildings. RenewableEnergy, 85(11), 1106–1115. https://doi.org/https://doi.org/10.1016/j.renene.2015.07.074
- Courard, L., Rondeux, M., Zhao, Z., & Michel, F. (2020). Use of recycled fine aggregates from C&DW for unbound road sub-base. Materials, 1–26.
- Crafford, P. L., Wessels, C. B., & Blumentritt, M. (2018). Sustainability and wood constructions: A review of green building rating systems and life-cycle assessment methods from a South African and developing world perspective. Advances in Building Energy Research, 1–20. https://doi.org/https://doi.org/10.1080/17512549.2018.1528884
- DassaultSystemes. (2009). Abaqus/CAE User’s Manual. Karlsson& Sorensen.
- Delgado, J. M. P. Q., Barreira, E., Ramos, N. M. M., & de Freitas, V. P. (2013). Hygrothermal numerical simulation tools applied to building physics. Springer-Verlag.
- Deshmukh, G., Birwal, P., Datir, R., & Patel, S. (2017). Thermal insulation materials: A tool for energy conservation. Journal of Food Processing & Technology, 8(04|4), 1–4. https://doi.org/https://doi.org/10.4172/2157-7110.1000670
- Dvoraka, B., & Volder, A. (2013). Rooftop temperature reduction from unirrigated modular green roofs in south-central Texas. Urban Forestry & Urban Greening, 12(1), 28–35. https://doi.org/https://doi.org/10.1016/j.ufug.2012.05.004
- Ebadati, M., & Ehyaei, M. A. (2018). Reduction of energy consumption in residential buildings with green roofs in three different climates of Iran. Advances in Building Energy Research, 14(1), 66–93. https://doi.org/https://doi.org/10.1080/17512549.2018.1489894
- Eksi, M., Rowe, D. B., Wichman, I. S., & Andresen, J. A. (2017). Effect of substrate depth, vegetation type, and season on green roof thermal properties. Energy and Buildings, 145, 174–187. https://doi.org/https://doi.org/10.1016/j.enbuild.2017.04.017
- Fan, X., Liu, W., & Wargocki, P. (2019). Physiological and psychological reactions of sub-tropically acclimatized subjects exposed to different indoor temperatures at a relative humidity of 70%. Indoor Air, 29(2), 215–230. https://doi.org/https://doi.org/10.1111/ina.12523
- Ferrante, A., Boiardi, L., & Fotopoulou, A. (2015). On the viability of nearly zero energy buildings in the Mediterranean urban contexts. Advances in Building Energy Research, 9(2), 190–223. https://doi.org/https://doi.org/10.1080/17512549.2014.941008
- Fraunhofer IBP (Fraunhofer Institute for Building Physics). (2015). WUFI Pro. [Computer software]. Fraunhofer IBP.
- Jafari, K., & Toufigh, V. (2017). Experimental and analytical evaluation of rubberized polymer concrete. Construction and Building Materials, 155, 495–510. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.08.097
- Jarrah, M., Khezrzadeh, H., Mofid, M., & Jafari, K. (2019). Experimental and numerical evaluation of pistonmetallic damper (PMD). Journal of Constructional Steel Research, 54, 99–109. https://doi.org/https://doi.org/10.1016/j.jcsr.2018.11.024
- Jim, C. Y. (2014). Air-conditioning energy consumption due to green roofs with different building thermal insulation. Applied Energy, 128, 49–59. https://doi.org/https://doi.org/10.1016/j.apenergy.2014.04.055
- Jim, C. Y., & Tsang, S. W. (2011). Modeling the heat diffusion process in the abiotic layers of green roofs. Energy and Buildings, 43(6), 1341–1350. https://doi.org/https://doi.org/10.1016/j.enbuild.2011.01.012
- Jin, L., Zhang, Y., & Zhang, Z. (2017). Human responses to high humidity in elevated temperatures for people in hot-humid climates. Building and Environment, 114, 257–266. https://doi.org/https://doi.org/10.1016/j.buildenv.2016.12.028
- Kapsalis, V. C., Vardoulakis, E., & Karamanis, D. (2014). Simulation of the cooling effect of the roof added photovoltaics. Advances in Building Energy Research, 8(1), 41–54. https://doi.org/https://doi.org/10.1080/17512549.2014.890534
- Karamanis, D., Kyritsi, E., Krimpalis, S., Vardoulakis, E., Gorgolis, G., Kapsalis, V., Mihalakakou, G., & Ökte, N. (2013). Cooling roofs through low temperature solar-heat transformations in hydrophilic porous materials. Advances in Building Energy Research, 7(2), 235–243. https://doi.org/https://doi.org/10.1080/17512549.2013.865562
- Karatzas, K., & Katsifarakis, N. (2018). Modelling of household electricity consumption with the aid of computational intelligence methods. Advances in Building Energy Research, 12(1), 84–96. https://doi.org/https://doi.org/10.1080/17512549.2017.1314831
- Kazemi, M., Hajforoush, M., KhakpourTalebi, P., Daneshfar, M., Shokrgozar, A., Jahandari, S., Saberian, M., & Li, J. (2020). In-situ strength estimation of polypropylene fibre reinforced recycled aggregate concrete using Schmidt rebound hammer and point load test. Journal of Sustainable Cement-Based Materials, 9, 1–18. https://doi.org/https://doi.org/10.1080/21650373.2020.1734983
- Kazemi, M., Kafi, M. A., Hajforoush, M., & Kheyroddin, A. (2020). Cyclic behavior of steel ring filled with compressive plastic or concrete, installed in concentric bracing system. Asian Journal of Civil Engineering, 21(1), 29–39. https://doi.org/https://doi.org/10.1007/s42107-019-00181-7
- Kazemi, M., Li, J., Harehdasht, S. L., Yousefieh, N., Jahandari, S., & Saberian, M. (2019). Non-linear behaviour of concrete beams reinforced with GFRP and CFRP bars grouted in sleeves. Structures, 23, 87–102. https://doi.org/https://doi.org/10.1016/j.istruc.2019.10.013
- Kazemi, M., Madandoust, R., & de Brito, J. (2019). Compressive strength assessment of recycled aggregate concrete using Schmidt rebound hammer and core testing. Construction and Building Materials, 224, 630–638. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.07.110
- Künzel, H. M. (1994). VerfahrenZurein- und zweidimensionalenBerechnung des- gekoppeltenWärme- und Feuchtetransports in BauteilenmitEinfachen Ken- nwerten. Universität Stuttgart.
- Lei, K.-T., Tang, J.-S., & Chen, P.-H. (2019). Numerical simulation and experiments with green roofs for increasing indoor thermal comfort. Journal of the Chinese Institute of Engineers, 42(4), 346–356. https://doi.org/https://doi.org/10.1080/02533839.2019.1585207
- Li, Y., & Zhu, Q. (2003). Simultaneous heat and moisture transfer with moisture sorption, condensation and capillary liquid diffusion in porous textiles. Textile Research Journal, 73(6), 515–524. https://doi.org/https://doi.org/10.1177/004051750307300609
- Ling, H., Chen, C., Qin, H., Wei, S., Lin, J., Li, N., Zhang, M., Yu, N., & Li, Y. (2016). Indicators evaluating thermal inertia performance of envelops with phase change material. Energy and Buildings, 122, 175–184. https://doi.org/https://doi.org/10.1016/j.enbuild.2016.04.009
- Madandoust, R., & Kazemi, M. (2017). Numerical analysis of break-off test method on concrete. Construction and Building Materials, 151, 487–493. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.05.126
- Madandoust, R., Kazemi, M., KhkapourTalebi, P., & de Brito, J. (2019). Effect of the curing type on the mechanical properties of lightweight concrete with polypropylene and steel fibres. Construction and Building Materials, 223, 1038–1052. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.08.006
- Mickovski, S. B., Buss, K., McKenzie, B. M., & Sökmener, B. (2013). Laboratory study on the potential use of recycled inert construction waste material in the substrate mix for extensive green roofs. Ecological Engineering, 61, 706–714. https://doi.org/https://doi.org/10.1016/j.ecoleng.2013.02.015
- Mohammadi, M., Kafi, M. A., Kheyroddin, A., & Ronagh, H. R. (2019). Experimental and numerical investigation of an innovative buckling-restrained fuse under cyclic loading. Structures, 22, 186–199. https://doi.org/https://doi.org/10.1016/j.istruc.2019.07.014
- Mohammed, B. S., Hossain, K. M. A., Swee, J. T. E., Wong, G., & Abdullahi, M. (2012). Properties of crumb rubber hollow concrete block. Journal of Cleaner Production, 23(1), 57–67. https://doi.org/https://doi.org/10.1016/j.jclepro.2011.10.035
- Navarro, L., Garcia, A. D., Solé, C., Castell, A., & Cabeza, L. F. (2012). Thermal loads inside buildings with phase change materials: Experimental results. Energy Procedia, 20, 342–349. https://doi.org/https://doi.org/10.1016/j.egypro.2012.11.040
- Nematzadeh, M., Shahmansouri, A. A., & Fakoor, M. (2020). Post-fire compressive strength of recycled PET aggregate concrete reinforced with steel fibers: Optimization and prediction via RSM and GEP. Construction and Building Materials, 252, 119057. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2020.119057
- Ngan, G. (2004). Green roof policies: Tools for encouraging sustainable design. Landscape Architecture Canada Foundation, 2–49. http://www.gnla.ca/assets/Policy%20report.pdf
- Oberndorfer, E., Lundholm, J., Bass, B., Coffman, R. R., Doshi, H., Dunnett, N., Gaffin, S., Kohler, M., Liu, K. K. Y., & Rowe, B. (2007). Green roofs as urban ecosystems: Ecological structures, functions, and services. BioScience, 57(10), 823–833. https://doi.org/https://doi.org/10.1641/B571005
- Palla, A., Gnecco, I., & Lanza, L. G. (2009). Unsaturated 2D modelling of subsurface water flow in the coarse-grained porous matrix of a green roof. Journal of Hydrology, 379(1-2), 193–204. https://doi.org/https://doi.org/10.1016/j.jhydrol.2009.10.008
- Papafotiou, M., Pergialioti, N., Tassoula, L., Massas, I., & Kargas, G. (2013). Growth of native aromatic xerophytes in an extensive Mediterranean green roof, as affected by substrate type and depth, and irrigation frequency. HortScience, 48(10), 1327–1333. https://doi.org/https://doi.org/10.21273/HORTSCI.48.10.1327
- Parizotto, S., & Lamberts, R. (2011). Investigation of green roof thermal performance in temperate climate: A case study of an experimental building in Florianópolis city, Southern Brazil. Energy and Buildings, 43(7), 1712–1722. https://doi.org/https://doi.org/10.1016/j.enbuild.2011.03.014
- Pérez, G., Coma, J., Solé, C., Castell, A., & Cabeza, L. F. (2012). Green roofs as passive system for energy savings when using rubber crumbs as drainage layer. Energy Procedia, 30, 452–460. https://doi.org/https://doi.org/10.1016/j.egypro.2012.11.054
- Pérez, G., Vila, A., Rincón, L., Solé, C., & Cabeza, L. F. (2012). Use of rubber crumbs as drainage layer in green roofs as potential energy improvement material. Applied Energy, 97, 347–354. https://doi.org/https://doi.org/10.1016/j.apenergy.2011.11.051
- Pfretzschner, J., & Rodriguez, R. M. (1999). Acoustic properties of rubber crumbs. Polymer Testing, 18(2), 81–92. https://doi.org/https://doi.org/10.1016/S0142-9418(98)00009-9
- Raji, B., Tenpierik, M. J., & van den Dobbelteen, A. (2015). The impact of greening systems on building energy performance: A literature review. Renewable & Sustainable Energy Reviews, 45, 610–623. https://doi.org/https://doi.org/10.1016/j.rser.2015.02.011
- Ramin, H., Hanafizadeh, P., Ehterami, T., & AkhavanBehabadi, M. A. (2019). Life cycle-based multi-objective optimization of wall structures in climate of Tehran. Advances in Building Energy Research, 13(1), 18–31. https://doi.org/https://doi.org/10.1080/17512549.2017.1344137
- Saberian, M., Li, J., & Cameron, D. (2019a). Effect of crushed glass on behavior of crushed recycled pavement materials together with crumb rubber for making a clean green base and subbase. Journal of Materials in Civil Engineering, 31(7), 04019108. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0002765
- Saberian, S., Li, J., & Setunge, S. (2019). Evaluation of permanent deformation of a new pavement base and subbase containing unbound granular materials, crumb rubber and crushed glass. Journal of Cleaner Production, 230, 38–45. https://doi.org/https://doi.org/10.1016/j.jclepro.2019.05.100
- Sadeghian, F., Haddad, A., Jahandari, S., Rasekh, H., & Ozbakkaloglu, T. (2020). Effects of electrokinetic phenomena on the load-bearing capacity of different steel and concrete piles: A small-scale experimental study. Canadian Geotechnical Journal. https://doi.org/https://doi.org/10.1139/cgj-2019-0650
- Sailor, D. J., & Hagos, M. (2011). An updated and expanded set of thermal property data for green roof growing media. Energy and Buildings, 43(9), 2298–2303. https://doi.org/https://doi.org/10.1016/j.enbuild.2011.05.014
- Schafaczek, B., & Zirkelbach, D. (2013). Ermittlung von MaterialeigenschaftenundeffektivenÜbergangsparametern von Dachbegrünungenzurzuverlässigen Simulation der hygrothermischenVerhältnisse in und unterGründächernbeibeliebigenNutzungen und unterschiedlichenStandorten, ForschungsinitiativeZukunftBau, F 2863, Band.
- Schulte-Wrede, M., Merk, M., Gamper, A., Winter, S., & Wolf, A. (2012). Hygrothermal behaviour of a large scale wooden flat roof structure in Central Europe. WCTE, 55–62.
- Soleimani, S. S., Jahandari, S., Aberoumand, S., Rahmani, A., & Shokrgozar, A. (2020). Cu/Oil nanofluids flow over a semi-infinite plate accounting an experimental model. Heat Transfer Asian Research, 49(3), 1338–1354. https://doi.org/https://doi.org/10.1002/htj.21664
- Stovin, V., Poë, S., De-Ville, S., & Berretta, C. (2015). The influence of substrate andvegetation configuration on green roof hydrological performance. Ecological Engineering, 85, 159–172. https://doi.org/https://doi.org/10.1016/j.ecoleng.2015.09.076
- Tabares-Velasco, P. C., Zhao, M., Peterson, N., Srebric, J., & Berghage, R. (2012). Validation of predictive heat and mass transfer green roof model with extensive green roof field data. Ecological Engineering, 47, 165–173. https://doi.org/https://doi.org/10.1016/j.ecoleng.2012.06.012
- Teemusk, A., & Mander, U. l. (2009). Green roof potential to reduce temperature fluctuations of a roof membrane: A case study from Estonia. Building and Environment, 44(3), 643–650. https://doi.org/https://doi.org/10.1016/j.buildenv.2008.05.011
- Theodosiou, T. (2011). Green roofs in buildings: Thermal and environmental behavior. Advances in Building Energy Research, 3(1), 271–288. https://doi.org/https://doi.org/10.3763/aber.2009.0311
- Ting, M.-H. (2011). Numerical simulation of the general insulation material in the application of increasing indoor thermal comfort. [Master Thesis, Department of Civil Engineering, National Taiwan University]. (In Chinese).
- Toghroli, A., Mehrabi, P., Shariati, M., Trung, N. T., Jahandari, S., & Rasekh, H. (2020). Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers. Construction and Building Materials, 252, 1–22. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2020.118997
- Tommasi, P., Verrucci, L., & Rotonda, T. (2015). Mechanical properties of a weak pyroclastic rock and their relationship with microstructure. Canadian Geotechnical Journal, 52(2), 211–223. https://doi.org/https://doi.org/10.1139/cgj-2014-0149
- Tsutsumi, H., Tanabe, S., Harigaya, J., Iguchi, Y., & Nakamura, G. (2007). Effect of humidity on human comfort and productivity after step changes from warm and humid environment. Building and Environment, 42(12), 4034–4042. https://doi.org/https://doi.org/10.1016/j.buildenv.2006.06.037
- Uhl, M., & Schiedt, L. (2008). Green roof storm water retention –monitoring results. In 11th International Conference on Urban Drainage, Edinburgh, Scotland, UK, 31/ 8-5/9.
- Vertaľ, M., Zozulák, M., Vašková, A., & Korjenic, A. (2018). Hygrothermal initial condition for simulation process of green building construction. Energy and Buildings, 167, 166–176. https://doi.org/https://doi.org/10.1016/j.enbuild.2018.02.004
- Vesuviano, G., & Stovin, V. (2013). A generic hydrological model for a green roof drainage layer. Water Science & Technology, 68(4), 769–775. https://doi.org/https://doi.org/10.2166/wst.2013.294
- Vijayaraghavan, K. (2016). Green roofs: A critical review on the role of components, benefits, limitations and trends. Renewable and Sustainable Energy Reviews, 57, 740–752. https://doi.org/https://doi.org/10.1016/j.rser.2015.12.119
- Vijayaraghavan, K. U., Joshi, U. M., & Balasubramanian, R. (2012). A field study to evaluate runoff quality from green roofs. Water Research, 46(4), 1337–1345. https://doi.org/https://doi.org/10.1016/j.watres.2011.12.050
- Vila, A., Pérez, G., Solé, C., Fernández, A. I., & Cabeza, L. F. (2012). Use of rubber crumbs as drainage layer in experimental green roofs. Building and Environment, 48, 101–106. https://doi.org/https://doi.org/10.1016/j.buildenv.2011.08.010
- Wanielista, M., Kelly, M., & Hardin, M. (2008). A comparative analysis of green roof designs including depth of media, drainage layer materials, and pollution control media. Florida Department of Environmental Protection.
- Yu, C., & Hien, W. N. (2009). Thermal impact of strategic landscaping in cities: A review. Advances in Building Energy Research, 3(1), 237–260. https://doi.org/https://doi.org/10.3763/aber.2009.0309
- Zhao, Z., Courard, L., Groslambert, S., Jehin, T., Léonard, A., & Jianzhuang, X. (2020). Use of recycled concrete aggregates from precast block for the production of new building blocks: An industrial scale study. Resources, Conservation and Recycling, 157. https://doi.org/https://doi.org/10.1016/j.resconrec.2020.104786
- Zirkelbach, D. (2017, April 19–21). Green roofs− hygrothermal simulation of moisture and energy performance. Proceedings of the 1st International Conference on Construction Materials for Sustainable Future, Zadar, Croatia (pp. 810–815).
- Zirkelbach, D., Mehra, S.-R., Sedlbauer, K.-P., Künzel, H.-M., Stöckl, B. (2017). A hygrothermal green roof model to simulate moisture and energy performance of building components. Energy and Buildings, 145, 79–91. https://doi.org/https://doi.org/10.1016/j.enbuild.2017.04.001