References
- Abid, H., Baklouti, I., Driss, Z., & Bessrour, J. (2019, September). Experimental and numerical investigation of the Reynolds number effect on indoor airflow characteristics. Advances in Building Energy Research, 1–26. https://doi.org/https://doi.org/10.1080/17512549.2019.1660711
- Andersson, B., Andersson, R., Håkansson, L., Mortensen, M., Sudiyo, R., & Van Wachem, B. (2011). Computational fluid dynamics for engineers.
- Balafas, G. (2014). Polyhedral Mesh generation for CFD-analysis of complex structures. Technische Universitat Munchen.
- Bravo Alvarez, H., Sosa Echeverria, R., Sanchez Alvarez, P., & Krupa, S. (2013, February). Air quality standards for particulate matter (PM) at high altitude cities. Environmental Pollution, 173, 255–256. https://doi.org/https://doi.org/10.1016/j.envpol.2012.09.025
- Buratti, C., Moretti, E., Belloni, E., & Cotana, F. (2013). Unsteady simulation of energy performance and thermal comfort in non-residential buildings. Building and Environment, 59, 482–491. https://doi.org/https://doi.org/10.1016/j.buildenv.2012.09.015
- Buyya, R., Beloglazov, A., & Abawajy, J. (2010, June). Energy-efficient management of data center resources for cloud computing: A vision, architectural elements, and open challenges. Electrical Engineering and Systems Science, 1–12. https://arxiv.org/abs/1006.0308
- CD-adapco. (2016a). STAR-CCM+ User Guide. CD-adapco.
- CD-adapco. (2016b). STAR-CCM+ Introduction. http://mdx.plm.automation.siemens.com/star-ccm-plus
- Cho, J., Lim, T., & Kim, B. S. (2009). Measurements and predictions of the air distribution systems in high compute density (Internet) data centers. Energy and Buildings, 41(10), 1107–1115. https://doi.org/https://doi.org/10.1016/j.enbuild.2009.05.017
- Cho, J., Yang, J., & Park, W. (2014). Evaluation of air distribution system’s airflow performance for cooling energy savings in high-density data centers. Energy and Buildings, 68(PARTA), 270–279. https://doi.org/https://doi.org/10.1016/j.enbuild.2013.09.013
- Courant, R., Friedrichs, K., & Lewy, H. (1967). On the partial difference equations of mathematical physics. IBM Journal of Research and Development, 11(2), 215–234. https://doi.org/https://doi.org/10.1147/rd.112.0215
- Darwish, M., Moukalled, F., & Sekar, B. (2001). A unified formulation of the segregated class of algorithms for multifluid flow at all speeds. Numerical Heat Transfer, Part B: Fundamentals, 40(2), 99–137. https://doi.org/https://doi.org/10.1080/104077901750475887
- DeCusatis, C. (2017). Optical interconnects for data Centers: 1 – data center architectures. Woodhead Publishing Series in Electronic and Optical Materials, 3–41. https://doi.org/https://doi.org/10.1016/B978-0-08-100512-5.00001-2
- DiMinico, C. (2010). Telecommunications infrastructure standard for data centers, no. August. American National Standard Institute.
- Emerson Newtork Power.(2012). Familia DCWTM Liebert® Aires acondicionados de precisión de alta densidad con agua helada para centros de datos.
- Gao, C., Yu, Z., & Wu, J. (Nov. 2015). Investigation of airflow pattern of a typical data center by CFD simulation. Energy Procedia, 78, 2687–2693. https://doi.org/https://doi.org/10.1016/j.egypro.2015.11.350
- Grand View Research. (2017, July). Data Center power market analysis by product (PDU, UPS, Busway), By end-use (IT & Telecommunications, BFSI, Government, Energy, Healthcare, Retail), By region, and segment forecasts, 2018–2025. Grand View Research, ID: GVR-1-68038-959-3.
- Gupta, S. K. S., Gilbert, R. R., Banerjee, A., Abbasi, Z., Mukherjee, T., & Varsamopoulos, G. (2011, July). GDCSim: A tool for analyzing green data center design and resource management techniques. In 2011 international Green Computing Conference and Workshops (pp. 1–8). https://doi.org/https://doi.org/10.1109/IGCC.2011.6008612
- Hamman, K. D., & Berry, R. A. (2010, September). A CFD simulation process for fast reactor fuel assemblies. Nuclear Engineering and Design, 240(9), 2304–2312. https://doi.org/https://doi.org/10.1016/j.nucengdes.2009.11.007
- Hassan, N. M. S., Khan, M. M. K., & Rasul, M. G. (2013, January). Temperature monitoring and CFD analysis of Data Centre. Procedia Engineering, 56, 551–559. https://doi.org/https://doi.org/10.1016/j.proeng.2013.03.159
- Ibrahim, M., Gondipalli, S., Bhopte, S., Sammakia, B., Murray, B., Ghose, K., Iyengar, M., & Schmidt, R. (2010). Numerical modeling approach to dynamic data center cooling. https://doi.org/https://doi.org/10.1109/ITHERM.2010.5501335
- Joshi, G. (2013, January). Management information systems. Ubiquity, 2006(October), 503. https://doi.org/https://doi.org/10.1007/978-94-017-9618-7_44
- López, V., & Hamann, H. F. (2011). Heat transfer modeling in data centers. International Journal of Heat and Mass Transfer, 54(25), 5306–5318. https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2011.08.012
- Nada, S. A., Said, M. A., & Rady, M. A. (2016). CFD investigations of data centers’ thermal performance for different configurations of CRACs units and aisles separation. Alexandria Engineering Journal, 55(2), 959–971. https://doi.org/https://doi.org/10.1016/j.aej.2016.02.025
- Phan, L., & Lin, C. X. (2017). Reduced order modeling of a data center model with multi-parameters. Energy and Buildings, 136(136), 86–99. https://doi.org/https://doi.org/10.1016/j.enbuild.2016.11.050
- Phan, L., & Lin, C. X. (2019). CFD-based response surface methodology for rapid thermal simulation and optimal design of data centers. Adv. Build. Energy Res, https://doi.org/https://doi.org/10.1080/17512549.2019.1622154
- Rambo, J., & Joshi, Y. (2007, April). Modeling of data center airflow and heat transfer: State of the art and future trends. Distributed and Parallel Databases, 21(2–3), 193–225. https://doi.org/https://doi.org/10.1007/s10619-006-7007-3
- Reister, H., & Bauer, W. (2012, April). Simulation process of the heat protection of a full vehicle. SAE Tech. Pap, https://doi.org/https://doi.org/10.4271/2012-01-0635
- Sarkar, A., & Bardhan, R. (2019). Optimal interior design for naturally ventilated low-income housing: A design-route for environmental quality and cooling energy saving. Advances in Building Energy Research, https://doi.org/https://doi.org/10.1080/17512549.2019.1626764
- Schmidt, R., & Cruz, E. (2004). Cluster of high-powered racks within a raised-floor computer data center: Effect of perforated tile flow distribution on rack inlet air temperatures. Journal of Electronic Packaging, 126(4), 510–518. https://doi.org/https://doi.org/10.1115/1.1827266
- Siemens. (2016). STAR CCM+ documentation. PLM Siemens.
- Song, Z., Zhang, X., & Eriksson, C. (2015, August). Data center energy and cost saving evaluation. Energy Procedia, 75, 1255–1260. https://doi.org/https://doi.org/10.1016/j.egypro.2015.07.178
- Sosnowski, M., Krzywanski, J., & Gnatowska, R. (2017). Polyhedral meshing as an innovative approach to computational domain discretization of a cyclone in a fluidized bed CLC unit. Energy and Fuels, https://doi.org/https://doi.org/10.1051/e3sconf/20171401027
- Spiegel, M., Redel, T., Zhang, J., Struffert, T., Hornegger, J., Grossman, R., Doerfler, A., & Karmonik, C. (2011). Tetrahedral vs. Polyhedral mesh size evaluation on flow velocity and wall shear stress for cerebral hemodynamic simulation. Computer Methods in Biomechanics and Biomedical Engineering. https://doi.org/https://doi.org/10.1080/10255842.2010.518565
- Stamou, A., & Katsiris, I. (2006, September). Verification of a CFD model for indoor airflow and heat transfer. Building and Environment, 41(9), 1171–1181. https://doi.org/https://doi.org/10.1016/j.buildenv.2005.06.029
- Tatchell-Evans, M., Kapur, N., Summers, J., Thompson, H., & Oldham, D. (2017). An experimental and theoretical investigation of the extent of bypass air within Data Centres employing aisle containment, and its impact on power consumption. Applied Energy, https://doi.org/https://doi.org/10.1016/j.apenergy.2016.03.076
- Technavio. (2016a). Data center construction market in Latin America 2016–2020.
- Technavio. (2016b, February). Global data center market 2016–2020. Art. no. ID: IRTNTR20453.
- U. Environmental Protection Agency and P. Prevention Division. (2010). Region 8 Data Center Case Study. pp. 8–9.
- Uptime Institute. (2014). Data center site infrastructure tier standard: Operational sustainability. Uptime Institute, Llc, pp. 1–16.
- VanGilder, J. W., & Schmidt, R. R. (2005, January). Airflow uniformity through perforated tiles in a raised-floor data center. In Advances in electronic packaging, parts A, B, and C (pp. 493–501). https://doi.org/https://doi.org/10.1115/IPACK2005-73375
- Wibron, E. (2015). CFD Modeling of an air-cooled data center. Chalmers University Of Technology.
- Wibron, E., Ljung, A.-L., & Lundström, S. (2018). Computational fluid dynamics modeling and validating experiments of airflow in a data center. Energies, 11(644), 1–15. https://doi.org/https://doi.org/10.3390/en11030644
- Zhang, X., Iyengar, M., VanGilder, J. W., & Schmidt, R. R. (2008). Effect of rack modeling detail on the numerical results of a data center test cell. doi:https://doi.org/10.1109/ITHERM.2008.4544395