References
- R. Rahmani, A. Shirvani and H. Shirvani: ‘Optimization of partially textured parallel thrust bearings with square-shaped micro-dimples’, Tribol. Trans., 2007, 50, 401–406.10.1080/10402000701429261
- J. Han, L. Fang, J. Sun and S. Ge: ‘Hydrodynamic lubrication of microdimple textured surface using three-dimensional CFD,’ Tribol. Trans., 2010, 53, 860–870.10.1080/10402004.2010.496070
- A. R. Gherca, P. Maspeyrot, M. Hajjam and A. Fatu: ‘Influence of texture geometry on the hydrodynamic performances of parallel bearings’, Tribol. Trans., 2013, 56, 321–332.10.1080/10402004.2012.752550
- M. Scaraggi, F. P. Mezzapesa, G. Carbone, A. Ancona and L. Tricarico: ‘Friction properties of lubricated laser-microtextured-surfaces: an experimental study from boundary- to hydrodynamic-lubrication,’ Tribol. Lett., 2013, 49, 117–125.10.1007/s11249-012-0045-2
- A. Charitopoulos, D. Fouflias, C. I. Papadopoulos, L. Kaiktsis and M. Fillon: ‘Thermohydrodynamic analysis of a textured sector-pad thrust bearing: effects on mechanical deformations,’ Mech. Ind., 2014, 15, 403–411.
- J. H. Choo, R. P. Glovnea, A. K. Forrest and H. A. Spikes: ‘A low friction bearing based on liquid slip at the wall,’ J. Tribol., 2007, 129, 611–620.10.1115/1.2736704
- J. H. Choo, H. A. Spikes, M. Ratoi, R. P. Glovnea, and A. K.Forrest: ‘Friction reduction in low-load hydrodynamic lubrication with a hydrophobic surface,’ Tribol. Int., 2007, 40, 154–159.10.1016/j.triboint.2005.09.006
- R. F. Salant and A. E. Fortier: ‘Numerical analysis of a slider bearing with a heterogeneous slip/no-slip surface,’ Tribol. Trans., 2004, 47, 328–334.10.1080/05698190490455348
- M. Tauviqirrahman, M. Muchammad, J. Jamari and D. J. Schipper: ‘Numerical study of the load carrying capacity of lubricated parallel sliding textured surfaces including wall slip,’ Tribol. Trans., 2014, 57, (1), 134–145.10.1080/10402004.2013.854943
- M. Tauviqirrahman, R. Ismail, J. Jamari and D. J. Schipper: ‘Combined effects of texturing and slippage in lubricated parallel sliding contact’, Tribol. Int., 2013, 66, 274–281.10.1016/j.triboint.2013.05.014
- T. V. V. L. N. Rao, A. M. A. Rani, T. Nagarajan and F. M. Hashim: ‘Analysis of slider and journal bearing using partially textured slip surface,’ Tribol. Int., 2012, 56, 121–128.10.1016/j.triboint.2012.06.010
- F. Aurelian, M. Patrick and H. Mohamed: ‘Wall slip effects in (elasto) hydrodynamic journal bearings,’ Tribol. Int., 2011, 44, 868–877.10.1016/j.triboint.2011.03.003
- L.-L. Wang and C.-H. Lu: ‘Numerical analysis of spiral oil wedge sleeve bearing including cavitation and wall slip effects,’ Lubr. Sci., 2015, 27, (3), 193–207.10.1002/ls.v27.3
- B. J. Hamrock, S. R. Schmid and B. O. Jacobson: ‘Fundamental of fluid film lubrication- second edition,’ 2004, New York, NY, Marcel Dekker, Marcel Dekker,
- S. V. Patankar: ‘Numerical heat transfer and fluid flow,’ 1980, Levittown, Taylor & Francis.
- Y. Xiu: ‘Fabrication of surface micro-and nanostructures for superhydrophobic surfaces in electric and electronic applications,’ PhD thesis, Georgia Institute of Technology, Atlanta, GA, 2008.
- C. W. Wu, G. J. Ma and P. Zhou: ‘Low friction and high load support capacity of slider bearing with a mixed slip surface,’ J. Tribol., 2006, 128, 904–907.10.1115/1.2345419