Heat treatment effects on tribological characteristics for AISI A8 tool steel and development of wear mechanism maps using K means clustering and neural networks

References

• Saha SK, Prasad L, Kumar V. Experimental investigations on heat treatment of cold work tool steels: part 1, air-hardening grade (D2). Int J Eng Res Appl (IJERA). 2012;2:510–519.
   Google Scholar
• Masen MA. Abrasive tool wear in metal forming processes [Ph.D. thesis]. Enschede: University of Twente; September 2004. ISBN 90-365-2061-4.
   Google Scholar
• Dixit SS, Gujar UN, Kharde RR. Optimization of heat treatments for wear analysis of D5 tool steel by using DOE/RSM. Int J Eng Res Devel. 2012;5(3):19–28.
   Google Scholar
• Heat treatment of tool steel. 8th ed, 6th Revised ed. Hagfors, Sweden: Uddeholm AB; 2012.
   Google Scholar
• Heikkila I. Influence of tool steel microstructure on galling resistance against stainless steel. Tribology S. 2003;43:641–649.
   Google Scholar
• Nosar NS, Olsson M. Influence of tool steel surface topography on adhesion and material transfer in stainless steel/tool steel sliding contact. Wear. 2013;303(1–2):30–39.10.1016/j.wear.2013.02.015
   Web of Science ®Google Scholar
• Podgornik B, Majdic F, Leskovsek V, et al. Improving tribological properties of tool steels through combination of deep-cryogenic treatment and plasma nitriding. Wear. 2012;288:88–93.10.1016/j.wear.2011.04.001
   Web of Science ®Google Scholar
• Groche P, Christiany M. Evaluation of the potential of tool materials for the cold forming of advanced high strength steels. Wear. 2013;302:1279–1285.10.1016/j.wear.2013.01.001
   Web of Science ®Google Scholar
• Podgornik B, Leskov V. Wear mechanisms and surface engineering of forming tools. Mater Technol. 2015;49(3):313–324.
   Google Scholar
• Hillskog T. Choosing the proper steel to minimize abrasive adhesive tool wear. Stamping Journal® September/October 2003; September 25, 2003
   Google Scholar
• Ameen HA, Hassan KS, Mubarak EM. Effect of loads, sliding speeds and times on the wear rate for different materials. American journal of scientific and industrial research. 2011;2:99–106.
   Google Scholar
• Lim SC. Recent developments in wear mechanism maps;. Tribol Int. 1998;31(1–3):87–97.10.1016/S0301-679X(98)00011-5
   Web of Science ®Google Scholar
• Hernandez S, Hardell J, Courbon C, et al. High temperature friction and wear mechanism map for tool steel and boron steel tribopair. Tribol – Mater Surf Interfaces. 2014;8(2):74–84.10.1179/1751584X13Y.0000000049
   Google Scholar
• Singh V, Mishra AK. A genetic algorithm for K-mean clustering. Int J Emerg Technol Comput Appl Sci (IJETCAS). 2014;14–179.
   Google Scholar
• Luo H, Chen QH, Doan NCN, et al. Automated identification and characterization of clustered weld defects. IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Banff, AB, 2016. p. 536–541.
   Google Scholar
• Nacereddine N, Tridi M. Computer-aided shape analysis and classification of weld defects in industrial radiography based invariant attributes and neural networks. ISPA 2005. Proceedings of the 4th International Symposium on Image and Signal Processing and Analysis; 2005. p. 88–93.
   Google Scholar
• Specht DF. Probabilistic neural networks. Neural Netw. 1990;3:109–118.
   Google Scholar
• Luo D, Liu A. Kernel Fisher discriminant analysis based on a regularized method for multiclassification and application in lithological identification. Math Problems Eng. 2015;2015: 384183.
   Google Scholar
• Sudarshan Rao K, Varadarajan YS, Rajendra N. Artificial neural network approach for the prediction of Abrasive wear behavior of carbon fabric reinforced epoxy composite. Indian J Eng Mater Sci. 2014;21:16–22.
   Web of Science ®Google Scholar
• Fernandez Parente I, Artimez JM, Belzunce J, et al. Influence of heat treatment on the microstructure of high chromium steel used for manufacturing rolling rolls. Material Science Forum, Tans Tech Publication; 2010.
   Google Scholar
• Attaullah (Ayooq) A. Heat treatment and toughness behavior of tool steels (D2 and H13) for cutting blades. Ottawa: National Library of Canada; 1999.
   Google Scholar
• Chiu LH, Liao HC, Lin SC, et al. Carbide distribution effect on wear behavior of cold work tool steels. Adv Mater Res. 2012;1–4.
   Google Scholar
• Singh K, Khatirkar RK. Microstructure evolution and abrasive wear behavior of D2 steel. Wear. 2015;328–329:206–216.10.1016/j.wear.2015.02.019
   Web of Science ®Google Scholar
• Tang L, Gao C, Huang J, et al. Dry sliding friction and wear behaviour of hardened AISI D2 tool steel with different hardness levels. Tribol Int. 2013;66:165–173.
   Web of Science ®Google Scholar
• Okonkwo PC, Kelly G, Rolfe BF, et al. The effect of temperature on sliding wear of steel-tool steel pairs. Wear. 2012;282–283:22–30.
   Web of Science ®Google Scholar
• Satpute MB, Shelke RS, Mhase VG. Analysis of friction and wear behavior of heat treated high carbon high chromium D2 steel. Imp J Interdiscip Res (IJIR). 2016;2(12):2137–2143.
   Google Scholar
• Gåård A. Influence of tool microstructure on galling resistance. Tribol Int. 2013;57:251–256. doi:10.1016/j.triboint.2012.08.022.
   Web of Science ®Google Scholar
• Ghazi SS, Mashloosh KM. Influence of heat treatment on resistance of wear and mechanical properties of die steel kind D3. Am J Sci Indus Res. 2015;33–40.
   Google Scholar
• Okonkwo Paul C., Kelly Georgina, Rolfe B. F., et al. The effect of sliding speed on the wear of steel–tool steel pairs. Tribol Int. l; 2016;97:218–227.
   Web of Science ®Google Scholar