References
- Olson DL, Cross CE. Friction and wear in the mining and mineral industries, ASM handbook, friction, lubrication and wear technology. Vol. 18. ASM International; 1992. p. 299–312.
- Norman TE. Wear in ore processing machinery. In: Peterson MB, Winer WO, editors. Wear control handbook. New York: ASME; 1980; p. 1009–1051.
- Hawk JA, Wilson RD. Tribology of earthmoving, mining and minerals processing. In: Bhushan B, editor. Chapter 35 in Book Modern tribology handbook. Boca Raton (FL): CRC Press; 2000. p. 1331–1370.
- Finnie I, McFadden DH. On the velocity dependence of the erosion of ductile metals by solid particles at low angles of incidence. Wear. 1978;48:181–190. doi: 10.1016/0043-1648(78)90147-3
- Finnie I, Stevick GR, Ridgely JR. The influence of impingement angle on the erosion of ductile metals by angular abrasive particles. Wear. 1992;152:91–98. doi: 10.1016/0043-1648(92)90206-N
- Bitter JGA. A study of erosion phenomena: Part I, Part II. Wear. 1963;6:169–190. doi: 10.1016/0043-1648(63)90073-5
- Hutchings IM. A model for the erosion of metals by spherical particles at normal incidence. Wear. 1981;70:269–281. doi: 10.1016/0043-1648(81)90347-1
- Neilson JH, Gilchrist A. Erosion by a stream of solid particles. Wear. 1968;11:111–122. doi: 10.1016/0043-1648(68)90591-7
- Sundararajan G, Shewmon PG. A new model for the erosion or metals at normal incident. Wear. 1983;84:237–258. doi: 10.1016/0043-1648(83)90266-1
- Sundström A, Rendóna J, Olsson M. Wear behaviour of some low alloyed steels under combined impact/abrasion contact conditions. Wear. 2001;250:744–754. doi: 10.1016/S0043-1648(01)00712-8
- Saha G. Abrasive wear of alloys for ground engaging tools. [Thesis submitted for PhD Degree]. Deakin University; 2017. p. 234.
- Cleary PW. Elastoplastic deformation during projectile–wall collision. Appl Math Model. 2010;34:266–283. doi: 10.1016/j.apm.2009.04.004
- Kalala JT, Bwalya M, Moys MH. Discrete element method (DEM) modelling of evolving mill liner profiles due to wear. Part II. Industrial case study. Miner Eng; 18:1392–1397. doi: 10.1016/j.mineng.2005.02.010
- Lv D, Chen C, Zhang T. FEM analysis of solid particle erosion-wear of 45 steel. Adv Mat Res (Proceeding: ICMPMT2011). 2011;337:655–659.
- O’Toole B, Trabia M, Hixson R, et al. Modeling plastic deformation of steel plates in hypervelocity impact experiments, (Proceeding: The 13th Hypervelocity impact Symposium). Proc Eng. 2015;103:458–465. doi: 10.1016/j.proeng.2015.04.060
- Forsström D, Jonsén P. Calibration and validation of a large scale abrasive wear model by coupling DEM-FEM: Local failure prediction from abrasive wear of tipper bodies during unloading of granular material. Eng Fail Anal. 2016;66:274–283. doi: 10.1016/j.engfailanal.2016.04.007
- Dieter GE. Mechanical metallurgy. McGraw-Hill; 1988, p. 751.
- Hosford WF. Mechanical behavior of materials. Cambridge: Cambridge University Press; 2005.
- Prasad KE, Chollacoop N, Ramamurty U. Role of indenter angle on the plastic deformation underneath a sharp indenter and on representative strains: An experimental and numerical study. Acta Mater. 2011;59:4343–4355. doi: 10.1016/j.actamat.2011.03.058
- Santos Jr C. The characterization of Vicker’s microhardness indentations and pile-up profiles as a strain-hardening microprobe [Thesis submitted for Master Degree]. University of California at Santa Barbara; 1998, p. 154.
- Hu Z, Lynne K, Markondapatnaikuni SP, et al. Material elastic–plastic property characterization by nano indentation testing coupled with computer modeling. Mat Sci Eng A. 2013;587:268–282. doi: 10.1016/j.msea.2013.08.071
- Wensink H, Elwenspoek MC. A closer look at the ductile–brittle transition in solid particle erosion. Wear. 2002;253:1035–1043. doi: 10.1016/S0043-1648(02)00223-5
- Hatchings IM, Winter RE. Particle erosion of ductile metals: A mechanism of material removal. Wear. 1974;27:121–128. doi: 10.1016/0043-1648(74)90091-X
- Winter RE, Hatchings IM. Solid particle erosion studies using single angular particle. Wear. 1974;29:181–194. doi: 10.1016/0043-1648(74)90069-6
- Winter RE, Hatchings IM. The role of adiabatic shear in solid particle erosion. Wear. 1975;34:141–148. doi: 10.1016/0043-1648(75)90060-5
- Juneja BL, Sekhon GS, Seth N. Fundamentals of cutting and machine tools. New Age International; 2003. p. 626.