References
- Liu K, Yao X, Jiang L. Recent developments in bio-inspired special wettability. Chem Soc Rev. 2010;39(8):3240. DOI:10.1039/b917112f.
- Müller FA, Kunz C, Gräf S. Bio-inspired functional surfaces based on laser-induced periodic surface structures. Materials. 2016;9(6):476. DOI:10.3390/ma9060476.
- Yong J, Chen F, Yang Q, et al. A review of femtosecond-laser-induced underwater superoleophobic surfaces. Adv Mater Interfaces. 2018;5(7):1701370. DOI:10.1002/admi.201701370.
- Zorba V, Stratakis E, Barberoglou M, et al. Biomimetic artificial surfaces quantitatively reproduce the water repellency of a lotus leaf. Adv Mater. 2008;20(21):4049–4054. DOI:10.1002/adma.200800651.
- Long J, Fan P, Gong D, et al. Superhydrophobic surfaces fabricated by femtosecond laser with tunable water adhesion: from lotus leaf to rose petal. ACS Appl Mater Interfaces. 2015;7(18):9858–9865. DOI:10.1021/acsami.5b01870.
- Helbig R, Nickerl J, Neinhuis C, et al. Smart skin patterns protect springtails. PLoS One. 2011;6(9):e25105. DOI:10.1371/journal.pone.0025105.
- Romano J-M, Helbig R, Fraggelakis F, et al. Springtail-inspired triangular laser-induced surface textures on metals using MHz ultrashort pulses. J Micro Nano-Manuf. 2019;7(2):024504. DOI:10.1115/1.4043417.
- Wenzel RN. Resistance of solid surfaces to wetting by water. Ind Eng Chem. 1936;28(8):988–994. DOI:10.1021/ie50320a024.
- Cassie ABD, Baxter S. Wettability of porous surfaces. Trans Faraday Soc. 1944;40:546–551. DOI:10.1039/TF9444000546.
- Koch K, Bhushan B, Jung YC, et al. Fabrication of artificial lotus leaves and significance of hierarchical structure for superhydrophobicity and low adhesion. Soft Matter. 2009;5(7):1386–1393. DOI:10.1039/B818940D.
- Kietzig A-M, Mirvakili MN, Kamal S, et al. Laser-patterned super-hydrophobic pure metallic substrates: Cassie to Wenzel wetting transitions. J Adhes Sci Technol. 2011;25(20):2789–2809. DOI:10.1163/016942410X549988.
- Busà C, Rickard JJS, Chun E, et al. Tunable superapolar lotus-to-rose hierarchical nanosurfaces via vertical carbon nanotubes driven electrohydrodynamic lithography. Nanoscale. 2017;9(4):1625–1636. DOI:10.1039/C6NR08706J.
- Cai Y, Chang W, Luo X, et al. Superhydrophobic structures on 316L stainless steel surfaces machined by nanosecond pulsed laser. Precis Eng. 2018;52:266–275. DOI:10.1016/j.precisioneng.2018.01.004.
- Fraggelakis F, Mincuzzi G, Lopez J, et al. Texturing metal surface with MHz ultra-short laser pulses. Opt Express. 2017;25(15):18131–18139. DOI:10.1364/OE.25.018131.
- Kietzig A-M, Hatzikiriakos SG, Englezos P. Patterned superhydrophobic metallic surfaces. Langmuir. 2009;25(8):4821–4827. DOI:10.1021/la8037582.
- Wu B, Zhou M, Li J, et al. Superhydrophobic surfaces fabricated by microstructuring of stainless steel using a femtosecond laser. Appl Surf Sci. 2009;256(1):61–66. DOI:10.1016/j.apsusc.2009.07.061.
- Martínez-Calderon M, Rodríguez A, Dias-Ponte A, et al. Femtosecond laser fabrication of highly hydrophobic stainless steel surface with hierarchical structures fabricated by combining ordered microstructures and LIPSS. Appl Surf Sci. 2016;374:81–89. DOI:10.1016/j.apsusc.2015.09.261.
- Vorobyev AY, Guo C. Direct femtosecond laser surface nano/microstructuring and its applications. Laser Photonics Rev. 2013;7(3):385–407. DOI:10.1002/lpor.201200017.
- Huerta-Murillo D, García-Girón A, Romano JM, et al. Wettability modification of laser-fabricated hierarchical surface structures in Ti-6Al-4V titanium alloy. Appl Surf Sci. 2019;463:838–846. DOI:10.1016/j.apsusc.2018.09.012.
- Rebollar E, Aldana JRVd, Martín-Fabiani I, et al. Assessment of femtosecond laser induced periodic surface structures on polymer films. Phys Chem Chem Phys. 2013;15(27):11287–11298. DOI:10.1039/C3CP51523K.
- Mezera M, van Drongelen M, Römer GRBE. Laser-induced periodic surface structures (LIPSS) on polymers processed with picosecond laser pulses. J Laser Micro Nanoeng. 2018;13(2):105–116. DOI:10.2961/jlmn.2018.02.0010.
- Cardoso MR, Martins RJ, Dev A, et al. Highly hydrophobic hierarchical nanomicro roughness polymer surface created by stamping and laser micromachining. J Appl Polym Sci. 2015;132(24). DOI:10.1002/app.42082.
- Jiang D, Fan P, Gong D, et al. High-temperature imprinting and superhydrophobicity of micro/nano surface structures on metals using molds fabricated by ultrafast laser ablation. J Mater Process Technol. 2016;236:56–63. DOI:10.1016/j.jmatprotec.2016.05.009.
- Rajab FH, Liu Z, Wang T, et al. Controlling bacteria retention on polymer via replication of laser micro/nano textured metal mould. Opt Laser Technol. 2019;111:530–536. DOI:10.1016/j.optlastec.2018.10.031.
- Brezinová J, Guzanová A. Friction conditions during the wear of injection mold functional parts in contact with polymer composites. J Reinf Plast Compos. 2010;29(11):1712–1726. DOI:10.1177/0731684409341675.
- Lapcik L, Jindrova P, Lapcikova B, et al. Effect of the talc filler content on the mechanical properties of polypropylene composites. J Appl Polym Sci. 2008;110(5):2742–2747. DOI:10.1002/app.28797.
- Han J, Cai M, Lin Y, et al. Comprehensively durable superhydrophobic metallic hierarchical surfaces via tunable micro-cone design to protect functional nanostructures. RSC Adv. 2018;8(12):6733–6744. DOI:10.1039/C7RA13496G.
- Romano J-M, Gulcur M, Garcia-Giron A, et al. Mechanical durability of hydrophobic surfaces fabricated by injection moulding of laser-induced textures. Appl Surf Sci. 2019;476:850–860. DOI:10.1016/j.apsusc.2019.01.162.
- Garcia-Giron A, Romano JM, Liang Y, et al. Combined surface hardening and laser patterning approach for functionalising stainless steel surfaces. Appl Surf Sci. 2018;439:516–524. DOI:10.1016/j.apsusc.2018.01.012.
- Bienk EJ, Mikkelsen NJ. Application of advanced surface treatment technologies in the modern plastics moulding industry. Wear. 1997;207(1):6–9. DOI:10.1016/S0043-1648(96)07503-5.
- Crema L, Lucchetta G. A study of mold friction and wear in injection molding of plastic-bonded hard ferrite. Key Eng Mater. 2014;611-612:460–472. DOI:10.4028/www.scientific.net/KEM.611-612.460.
- Dong H. S-phase surface engineering of Fe-Cr, Co-Cr and Ni-Cr alloys. Int Mater Rev. 2010;55(2):65–98. DOI:10.1179/095066009X12572530170589.
- Bonse J, Rosenfeld A, Krüger J. On the role of surface plasmon polaritons in the formation of laser-induced periodic surface structures upon irradiation of silicon by femtosecond-laser pulses. J Appl Phys. 2009;106(10):104910. DOI:10.1063/1.3261734.
- Huang M, Zhao F, Cheng Y, et al. Origin of laser-induced near-subwavelength ripples: interference between surface plasmons and incident laser. ACS Nano. 2009;3(12):4062–4070. DOI:10.1021/nn900654v.
- Yasumaru N, Sentoku E, Miyazaki K, et al. Femtosecond-laser-induced nanostructure formed on nitrided stainless steel. Appl Surf Sci. 2013;264:611–615. DOI:10.1016/j.apsusc.2012.10.076.
- Romano J-M, Garcia-Giron A, Penchev P, et al. Triangular laser-induced submicron textures for functionalising stainless steel surfaces. Appl Surf Sci. 2018;440:162–169. DOI:10.1016/j.apsusc.2018.01.086.
- Gualtieri E, Borghi A, Calabri L, et al. Increasing nanohardness and reducing friction of nitride steel by laser surface texturing. Tribol Int. 2009;42(5):699–705. DOI:10.1016/j.triboint.2008.09.008.
- Byskov-Nielsen J, Savolainen J-M, Christensen MS, et al. Ultra-short pulse laser ablation of copper, silver and tungsten: experimental data and two-temperature model simulations. Appl Phys A. 2011;103(2):447–453. DOI:10.1007/s00339-011-6363-7.
- Patcharaphun S, Mennig G. Prediction of tensile strength for sandwich injection molded short-glass-fiber reinforced thermoplastics. J Met Mater Miner. 2007;17(2):9–16.
- Bay RS, Tucker CL. Fiber orientation in simple injection moldings. Part I: theory and numerical methods. Polym Compos. 1992;13(4):317–331. DOI:10.1002/pc.750130409.
- Baruffi F, Calaon M, Tosello G. Micro-Injection moulding in-line quality assurance based on product and process fingerprints. Micromachines. 2018;9(6):293. DOI:10.3390/mi9060293.