References
- Jon VG. Biodiesel processing and production. Fuel Process Technol. 2004;86(10):1097–1107.
- Earl C, Robert LM. Long-term storage stability of biodiesel and biodiesel blends. Fuel Process Technol. 2014;128:339–348.
- Jaichandar S, Annamalai K. The status of biodiesel as an alternative fuel for diesel engine – An overview. J Sustain Energ Environ. 2011;2:71–75.
- Ramadhas AS, Jayaraj S, Muraleedharan C. Use of vegetable oils as I.C. engine fuel – a review. Renew Energ. 2004;29:727–742.
- Anna L, Krister H. Water-in-diesel emulsions and related systems. Adv Colloid Interfac. 2006;123–126:231–239.
- Tyson KS, Bozell J, Wallace R, et al. Biomass oil analysis: research needs and recommendations. NREL/TP-510-34796. Golden (CO): National Renewable Energy Laboratory; 2004.
- Sheehan J, Camobreco V, Duffield J, et al. An overview of biodiesel and petroleum diesel life cycles. NREL/TP-580-24772. Golden (CO): National Renewable Energy Laboratory; 1998.
- Johnson OI, Olisaemeka CN, Chidiebere FN. Effects of blend on the properties, performance and emission of palm kernel oil biodiesel. Biofuels. 2015; 6(1–2):1–8. DOI:10.1080/17597269.2015.1030719.
- Chukwuezie OC, Nwaigwe KN, Asoegwu SN, et al. Diesel engine performance of jatropha biodiesel: a review. Biofuels. 1998;5(4):415–430.
- Baluster JM, Fueyo N, Dopazo C. Combustion characteristics of heavy oil-water emulsions. Fuel. 1996;75:695.
- Cook DH, Law CK. A Preliminary study on the utilization of water-in-oil emulsions in diesel engines. Combust Sci Technol. 1978;18:217.
- Law CK. A model for The combustion of oil–water emulsion droplets. Combust Sci Technol. 1977;17:29.
- Ballester JM, Fueyo N, Dopazo C. Combustion characteristics of heavy oil-water emulsions. Fuel. 1996;75:695–705.
- Gunnerman RW, Russell RL. Emission and efficiency benefits of emulsified fuels to internal combustion engines. SAE Tech Pap 972099; 1997.
- Andrews GE, Bartle SW, Pang SW, et al. The reduction in diesel particulate emissions using emulsified fuels. SAE Pap 880348; 1988.
- Tsukahara M, Yoshimoto Y. Reduction of Nox, smoke, Bsfc, and maximum combustion pressure by low compression ratios in a diesel engine fuelled by emulsified fuel. International Congress and Exposition. Detroit Warrendale (PA): SAE; 1992. p. 71.
- Lin CY, Wang KH. Effects of a combustion improver on diesel engine performance and emission characteristics when using Three phase emulsions as an alternative fuel. Energ Fuel. 2004;18:477–484.
- Bertola A, Li R, Boulouchos K. Influence of water-diesel fuel emulsions and EGR on combustion and exhaust emissions of heavy duty DI diesel engines equipped with common-rail injection system. SAE Paper Tech Nr 2003-01-3146; 2003.
- Combustion Analysis Basics An overview of measurements, methods and calculations used in combustion analysis. TSI Incorporated; 2004.
- Koc AB, Abdullah M. Performance and NOx emissions of a diesel engine fueled with biodiesel-diesel-water nanoemulsions. J Fuel Process Technol. 2013;109:70–77.
- An overview of measurements, methods and calculations used in combustion analysis. TSI Incorporated 2004.
- Park S., Kim H., Choi B. Emission characteristics of exhaust gases and nanoparticles from a diesel engine with biodiesel-diesel blended fuel (BD20). J Mech Sci Technol. 2009;23:2555–2564.
- Bryan RM. Biodiesel production, properties and feed stocks. J In Vitro Cell Dev Biol-Plant. 2009;45:229–266.
- Al-Sabagh AM, Emara MM, Noor El-Din MR, et al. Water-in-diesel fuel nanoemulsions prepared by high energy: emulsion drop size and stability, and emission characteristics. J Surfact Deterg. 2012;15:139–145.
- Bidita BS, Suraya AR, Shazed MA, et al. Influence of fuel additive in the formulation and combustion characteristics of water-in-diesel nanoemulsion fuel. Energ Fuels. 2014;28:4149–4161.
- Li Kai. Chemical, Biological and Environmental Engineering. Proceedings of the World Scientific, Singapore; 2009.
- Okullo A., Temu AK, Ogwok P, et al. Physico-chemical properties of biodiesel from jatropha and castor oils. Int J Renew Energ Res. 2012;2:47–52.
- Luc A, David H. Phase inversion of polyacrylamide-based inverse-emulsions: Influence of inverting-surfactant type and concentration. J Appl Polym Sci. 2007;103(6):3567–358.