References
- Steven W. Beyerlein, Stanislaw Wojcicki, A lean burn catalytic engine. SAE Trans. 1988;880574:6.1040–6.1051.
- Senthil* R, Silambarasan R. Influence of injection pressure on performance, emission and combustion characteristics of annona methyl ester operated DI diesel engine. Oxid. Commun. 2015;38(2):818–829.
- Senthil R, Arunan K, Silambarasan R. Effect Of oxygenated additives on exhaust emissions reduction in Di diesel engine using biodiesel and its blends. Oxid. Commun. 2015;38(2):841–851.
- Roger P. Worthen, Rune R, Aravid E. Pasto. Ceramic engine components. SAE Trans. 1988;881150:3.892–923.
- Kamo R, Dennis N. Assanis, Bryzik W. Thin thermal barrier coatings for engines. SAE Trans. 1989;890143:131–136.
- Miyairi Y, Matsuhisa T, Oikawa H, et al. Selective heat insulation of combustion chamber walls for a direct injection diesel engine with monolithic ceramic. SAE Trans. 1989;890141:117–132.
- Franco A, Shenbaga vinayaga moorthi N, Sathish Gandhi VC. Performance and emission study of sardine fish oil biodiesel in a diesel engine. Oxid. Commun. 01/2014;37(3):802–816.
- Alkidas AC. Performance and emissions achievements with an uncooled heavy duty, single cylinder diesel engine. SAE Trans. 1989;890144:137–148.
- Natarajan R. Combustion generated air pollution. IE (I). Journal (Mech) 1994;74:157–161.
- Dickey Daniel W. The effect of insulated combustion chamber surfaces on direct injection diesel engine performance, emission and combustion. SAE Trans. 1989;890292:3.332–3.348.
- Arunachalam M, Rao PS, Gopalakrishnan KV, et al. Performance of a diesel engine with thermally insulated combustion chamber. IE(I). Journal (Mech) 1989;70:52–55.
- Reddy CS, Domingo N, Graves RL. Low heat rejection engine research status; Where do we go from here? SAE Trans. 1990;900620:1386–1398.
- Prasad R, Shmrisa NK. Heat transfer in the piston of a semi adiabatic diesel engine. IE(I) Journal. (Mech) 1990;70:103–107.
- Boehm G, Harrer J. Nickel coated piston for improved durability and knock control engines. SAE Trans. 1990;900453:656–668.
- Fredrik Ahlstorm A, Ingemar Odenbrand CU. Catalytic combustion of soot deposits from diesel engines. J. Applied Catalysis 1990;60:143–156.
- Woods M, Glance P. Advanced insulated titanium piston for adiabatic engine. SAE Trans. 1990;900623:756–771.
- Katsuyuki , Geralti B, Kamu R. Performance of thin thermal barrier coating on small aluminium block diesel engine. SAE Trans. 1984;910461:383–395.
- Parlak A, Sahim B, Yasar H. Performance optimization of an irreversible dual cycle with respect to pressure ratio and temperature ratio—experimental results of a ceramic coated IDI Diesel engine. Energy Convers. Manage. 2004;45:1219–1232.
- Parlak A, Yasar B, Hasimoglu C, et al. The effect of injection timing on NOx emissions of low heat rejection indirect injection engine. Appl. Therm. Eng. 2005;25:3042–3052.
- Buyukkaya E, Cerit M. Experimental study of NOx emissions and injection timing of a low heat rejection diesel engine. Int. J. Therm. Sci. 2008;47:1096–1106.
- Taymaz I, Cakir K, Mimaroglu A. Experimental study of effective efficiency in a ceramic coated diesel engine. Surf. Coat. Technol. 2005;200:1182–1185.
- Aydin S, Sayin C, Aydin H. Investigation of the usability of biodiesel obtained from residual frying oil in a diesel engine with thermal barrier coating. Appl. Therm. Eng. 2015;80:212–219.
- Sivakumar G, Senthil Kumar S. Investigation on effect of Yttria Stabilized Zirconia coated piston crown on performance and emission characteristics of a diesel engine. Alexandria Engineering Journal December 2014;53(4):787–794.
- Aydin H. Combined effects of thermal barrier coating and blending with diesel fuel on usability of vegetable oils in diesel engines. Appl. Therm. Eng. March 2013;51(1–2):623–629.