116
Views
8
CrossRef citations to date
0
Altmetric
Articles

Parametric optimization for performance and emissions of DI diesel engine with Mahua biodiesel along with Diethyl ether as an additive

ORCID Icon & ORCID Icon
Pages 37-47 | Received 17 Dec 2016, Accepted 30 Apr 2017, Published online: 05 Jul 2017

References

  • Agarwal AK, Garg S. Characterisation and utilization of biodiesel as an alternative fuels for diesel engines. Consultative workshop in scientific strategies for production of non-edible oils for use as biofuels. Organized by Jagadguru Sri Shivarathreeshwara Academy of Technical Education in Bangalore on 2003 Sept 6-7.
  • Seela CR, Sankar BR, Sai Kiran. D. Influence of biodiesel and its blends on CI engine performance and emissions: a review. Biofuels. 2017;8(1):163–179. Available from:https://doi.org/10.1080/17597269.2016.1215069
  • Pramanik K Properties and use of jatropha curcas oil and diesel fuel blends in CI engine. Pergamon. Renew Energ 2003;28:239–248.
  • Raheman H. Diesel engine emissions and performance from blends of Karanja methyl ester and diesel. Biomass Bioenerg. 2004;27:393–397.
  • Singh Pali H, Kumar N. Combustion, performance and emissions of shorea robusta methyl ester blends in a diesel engine. Biofuels. 2016;7(5):447–456. Available from: https://doi.org/10.1080/17597269.2016.1153363
  • Talamala V, Prasada Rao K, Appa Rao BV, et al. Experimental investigation on combustion, emissions, performance and cylinder vibration analysis of an IDI engine with RBME along with isopropanol as an additive. Biofuels. 2017;8(3):307–321. Available from: https://doi.org/10.1080/17597269.2016.1226723
  • Prasada Rao K, Appa Rao BV. Performance and emission characteristics of an indirect diesel injection engine fueled with Mahua methyl ester and methanol as an additive. Biofuels. 2014;5:369–378. DOI: 10.1080/17597269.2014.977584
  • Prasada Rao K, Appa Rao BV, Rambabu V. Heat release rate and engine vibration correlation to investigate combustion propensity of an IDI engine run with biodiesel (MME) and methanol additive as an alternative to diesel fuel. Biofuels. 2015;6(1–2):45–54. DOI: 10.1080/17597269.2015.1045275
  • Prasada Rao K, Reddi V. Performance evaluation of diesel engine with Biodiesel along with additive for replacing diesel fuel. Int J Chem Sci. 2016;14(4):2379–2388.
  • Prasada Rao K, Santa Rao K, Govinda Rao P. Experimental investigation on performance and emission characteristics of a DI diesel engine fuelled with rice bran oil methyl ester and methanol as an additive. Int J Chem Tech Res. 2016;9(3):258–266.
  • Ramesh Babu P, Prasada Rao K, Appa Rao BV. The role of oxygenated fuel additive (DEE) along with Mahua methyl ester to estimate performance and emission analysis of DI-diesel engine. Int J Therm Technol. 2012;2(1):119–123.
  • Prasada Rao K, AppaRao BV. Combustion and emission analysis of IDI-diesel engine operated with Neat Mahua Methyl Ester (MME) blended with methanol as an additive. Int J Eng Res Appl. 2013;3(6):1642–1649.
  • Rambabu V, Prasad VJJ, Prasada Rao K. Performance and emission analysis of DI–diesel engine using neat linseed methyl ester along with methanol as dual fuel. Int J Sci Advance Technol. 2012;2(6):35–39.
  • Prasada Rao K, Appa Rao BV. Experimental investigation on cylinder vibration analysis, combustion, emission and performance of an IDI engine. Int J Manufact Mater Mech Eng (IJMMME). 2017;7(1):18–36.
  • Prasada Rao K, Maheswara Rao Rma, Babuand Svi, et al. Optimization of performance parameters of a diesel engine fuelled with biofuels. Int J Therm Technol. 2013;3:85–91.
  • CH. Kumar N, Prasada Rao K. Experimental investigation on performance and emission characteristics of a DI diesel engine fuelled with palm oil methyl ester and methanol as an additive. Int J Eng Trend Technol (IJETT). 2015;26(3):132–138.
  • Godiganur S, Suryanarayana Murthy CH, Reddy R. 6BTA 5.9 G2-1 Cummins engine, performance and emission tests using methyl ester mahua (Madhucaindica) oil/diesel blends. Renew Energ. 2009;34:2172–2177.
  • Sukumar P, Vedaraman N, Boppana V, et al. Mahua oil (Madhuca indica seed oil) methyl ester as bio diesel preparation and emission characteristics. Biomass Bioenerg. 2005;28:87–93.
  • Raheman H, Ghade SV. Performance of compression ignition engine with Mahua (Madhuca indica) biodiesel. Fuel 2007;86:2568–73.
  • Puhan S, Vedaraman N, Sankaranarayanan G, et al. Performance and emission study of Mahua oil (Madhuca indica oil) ethyl ester in a 4-stroke natural aspirated direct injection diesel engine, Renew Energ. 2005;30:1269–78
  • Patel PD, Lakdawala A, Patel RN. Box–Behnken response surface methodology for optimization of operational parameters of compression ignition engine fuelled with a blend of diesel, biodiesel and diethyl ether. Biofuels. 2016;7(2):87–95. Available from: https://doi.org/10.1080/17597269.2015.1118784
  • Choudhary A, Chelladurai H, Kannan C. Optimization of combustion performance of bioethanol (Water Hyacinth) diesel blends on diesel engine using response surface methodology. Arabian J Sci Eng. 2015;40(12):3675–3695.
  • Ganapathy T, Gakkhar R, Murugesan K. Optimization of performance parameters of diesel engine with Jatropha biodiesel using response surface methodology, Int J Sustain Energ. 2011;30(1):S76–S90.
  • Ganji PR, Chintala KP, Raju VK, Surapaneni SR. Parametric study and optimization using RSM of DI diesel engine for lower emissions. J Brazilian Soc Mech Sci Eng. 2017;39(3):671–680.
  • Hirkude JB, Padalkar AS. Performance optimization of CI engine fuelled with waste fried oil methyl ester-diesel blend using response surface methodology. Fuel. 2014;119:266–273.
  • Khoobbakht G, Najafi G, Karimi M, et al. Optimization of operating factors and blended levels of diesel, biodiesel and ethanol fuels to minimize exhaust emissions of diesel engine using response surface methodology. Appl Thermal Eng. 2016;99:1006–1017.
  • Pinzi S, Lopez-Gimenez F, Ruiz J, et al. Response surface modeling to predict biodiesel yield in a multi-feedstock biodiesel production plant. Bioresour Technol. 2010;101(24):9587–9593.
  • Karnwal A, Hasan M, Kumar N, et al. Multi- response optimization of diesel engine performance parameters using Thumba biodiesel -diesel blends by applying the Taguchi method and grey relational analysis. Int J Auto Technol. 2011;12:599–610.
  • Prasada Rao K, Appa Rao BV. Parametric optimization for performance and emissions of an IDI engine with Mahua biodiesel, Egypt. J Petrol. Published online: 2016. Available from: https://doi.org/10.1016/j.ejpe.2016.10.003
  • Venkatanarayana B, Ratnam CH, Umamaheswara Rao R, et al. Multi- response optimization of DI diesel engine performance parameters using Karanja methyl ester by applying Taguchi-based principal component analysis. Biofuels. 2017;8(1):49–57. Available from: https://doi.org/10.1080/17597269.2016.1200863
  • Maheswari N, Balaji C, Ramesh A. A nonlinear regression based multi-objective optimization of parameters based on experimental data from an IC engine fueled with biodiesel blends. Biomass Bio-Energ. 2011;35:2171–2183.
  • Alonso JM, Alvarruiz F, Deantesjm Hernandez L, et al. Combining neural networks and genetic algorithms to predict and reduce diesel engine emission. IEEE Trans. 2007;11:46–55.
  • Prasada Rao K, Victor Babu T, Anuradha G, et al. IDI diesel engine performance and exhaust emission analysis using biodiesel with an artificial neural network (ANN), Egypt. J Petrol. Published online: 2016. Available from: https://doi.org/10.1016/j.ejpe.2016.08.006
  • Ganapathy T, Murugesan K, Gakkhar RP. Performance optimization of Jatropha engine model using Taguchi approach. Appl Energ. 2009;86:2476–2486.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.