Temperature influence on chemical properties of jatropha curcas L. oil extracted with mechanical screw press

References

• Gübitz GM, Mittelbach M, Trabi M. Exploitation of the tropical oil seed plant Jatropha curcas L. Bioresource Technology. 1999;67:73–82.
   Web of Science ®Google Scholar
• Heller J. Physic nut. Jatropha curcas L. Promoting the conservation and use of underutilized and neglected crops.: Institute of Plant Genetics and Crop Plant Research, Gatersleben/International Plant Genetic Resources Institute, Rome; 1996.
   Google Scholar
• Jongschaap REE, Corré W, Bindraban P, et al. Claims and Facts on Jatropha curcas L. Wageningen,The Netherlands: Plant Research International 2007;Wageningen,: 42
   Google Scholar
• Karaj S, Müller J. Determination of physical, mechanical and chemical properties of seeds and kernels of Jatropha curcas L. Industrial Crops and Products. 2010;32:129–138.
   Web of Science ®Google Scholar
• Makkar HP, Becker K. Potential of J. curcas Seed Meal as Protein Supplement to Livestock Feed, Constraints to its Utilisation and Possible Strategies to Overcome Constraints. Jatropha 97. Managua, Nicaragua; 1997.
   Google Scholar
• Makkar HP, Becker K, Schmook B. Edible provenances of Jatropha curcas from Quintana Roo state of Mexico and effect of roasting on antinutrient and toxic factors in seeds. Plant Foods Hum Nutr. . 1998;52:31–36.
   PubMed Web of Science ®Google Scholar
• Makkar HP, Francis G, Becker K. Protein concentrate from Jatropha curcas screw-pressed seed cake and toxic and antinutritional factors in protein concentrate. J Sci Food Agric. . 2008;88:1542–1548.
   Web of Science ®Google Scholar
• Karaj S, Müller J. Optimizing mechanical oil extraction of Jatropha curcas L. seeds with respect to press capacity, oil recovery and energy efficiency. Industrial Crops and Products. 2011;34:1010–1016.
   Web of Science ®Google Scholar
• Kumar A, Sharma S. An evaluation of multipurpose oil seed crop for industrial uses (Jatropha curcas L.): A review. Industrial Crops and Products. 2008;28:1–10.
   Web of Science ®Google Scholar
• Beerens P. Screw-pressing of Jatropha seeds for fuelling purposes in less developed countries. Department of Sustainable Energy Technology. M.Sc. Eindhoven: Eindhoven University of Technology; 2007:87.
   Google Scholar
• ASTM-D6751-07a. Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels. West Conshohocken, PA: ASTM International; 2007.
   Google Scholar
• DIN-51605. Kraftstoffe für pflanzenöltaugliche Motoren - Rapsölkraftstoff - Anforderungen und Prüfverfahren. Berlin Deutsches Institut für Normung e.V.; 2010.
   Google Scholar
• DIN 51900-3. Prüfung fester und flüssiger Brennstoffe - Bestimmung des Brennwertes mit dem Bomben-Kalorimeter und Berechnung des Heizwertes - Teil 3: Verfahren mit adiabatischem Mantel. 2005:1–8.
   Google Scholar
• Francis G, Becker K. Jatropha biodiesel for tropical countries. Nachwachsende Rohstoffe. 2006;39:1–8.
   Google Scholar
• Martinez Herrera J, Siddhuraju P, Francis G, et al. Chemical composition, toxic/antimetabolic constituents, and effects of different treatments on their levels, in four provenances of Jatropha curcas L. from Mexico. Food Chemistry. 2006;96:80–89.
   Web of Science ®Google Scholar
• Zhang F, Fang Z, Wang YT. Biodiesel production directly from oils with high acid value by magnetic Na2SiO3@Fe3O4/C catalyst and ultrasound. Fuel. 2015;150:370–377.
   Web of Science ®Google Scholar
• Assawadithalerd M, Chollacoop N, Mungkalasiri J, et al. Optimizing Jatropha biodiesohol composition for a suitable kinematic viscosity by a phase diagram and mixture design. Fuel. 2016;164:134–140.
   Web of Science ®Google Scholar
• Aggarwal RK, Chandel SS. Review of Improved Cookstoves Programme in Western Himalayan State of India. Biomass and Bioenergy. 2004;27:131–144.
   Web of Science ®Google Scholar
• Kratzeisen M, Müller J. Influence of free fatty acid content of coconut oil on deposit and performance of plant oil pressure stoves. Fuel. 2010;89:1583–1589.
   Web of Science ®Google Scholar
• Kratzeisen M, Müller J. Influence of calcium and magnesium content of coconut oil on deposit and performance of plant oil pressure stoves. Fuel. 2010;89:59–66.
   Web of Science ®Google Scholar
• Kratzeisen M, Müller J. Influence of phosphorus content of coconut oil on deposit and performance of plant oil pressure stoves. Renewable Energy. 2010;35:2585–2589.
   Web of Science ®Google Scholar
• Pramanik K. Properties and use of jatropha curcas oil and diesel fuel blends in compression ignition engine. Renewable Energy. 2003;28:239–248.
   Web of Science ®Google Scholar
• Sun L, Li M, Ma C, et al. Preparation and evaluation of Jatropha curcas based catalyst and functionalized blend components for low sulfur diesel fuel. Fuel. 2017;206:27–33.
   Web of Science ®Google Scholar
• Sharma A, Murugan S. Durability analysis of a single cylinder DI diesel engine operating with a non-petroleum fuel. Fuel. 2017;191:393–402.
   Web of Science ®Google Scholar
• Openshaw K. A review of Jatropha curcas: An oil plant of unfulfilled promise. Biomass and Bioenergy. 2000;19:1–15.
   Web of Science ®Google Scholar
• De Jongh J, Adriaans A, Adriaans T. Jatropha Oil Quality Related to Use in Diesel Engines and Refining Methods. 2007;1–11.
   Google Scholar
• Karaj S, Müller J. Effect of container depth and sedimentation time on quality of Jatropha curcas L. oil. Fuel. 2014;118:206–213.
   Web of Science ®Google Scholar
• Wang Z, Li L, Wang J, et al. Effect of biodiesel saturation on soot formation in diesel engines. Fuel. 2016;175:240–248.
   Web of Science ®Google Scholar
• Monirul IM, Masjuki HH, Kalam MA, et al. Assessment of performance, emission and combustion characteristics of palm, jatropha and Calophyllum inophyllum biodiesel blends. Fuel. 2016;181:985–995.
   Web of Science ®Google Scholar
• Knothe G, Dunn RO, Bagby MO. Biodiesel: The Use of Vegetable Oils and Their Derivates as Alternative Diesel Fuels. 1997;666:172–208.
   Google Scholar
• Kratzeisen M, Müller J. Prediction of Deposit Formation during Combustion of Jatropha Oil from Standard Quality Parameters. 2010;89(10):2769–2774.
   Google Scholar
• DIN EN ISO 12185. Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method. DIN EN ISO 12185. Deutsches Institut für Normung e.V. Berlin: Beuth Verlag GmbH; 1996:1–9.
   Google Scholar
• DIN EN ISO 3104. Mineralölerzeugnisse - Durchsichtige und undurchsichtige Flüssigkeiten - Bestimmung der kinematischen Viskosität und Berechnung der dynamischen Viskosität DIN EN ISO 3104. Deutsches Institut für Normung e.V., Berlin: Beuth Verlag GmbH; 1999:1–10.
   Google Scholar
• DIN EN 14111. Bestimmung der Iodzahl. DIN EN 14111. Deutsches Institut für Normung e.V., Berlin: Beuth Verlag GmbH; 1995:1–4.
   Google Scholar
• DIN EN ISO 5508. Tierische und pflanzliche Fette und Öle - Gaschromatographische Untersuchung der Methylester von Fettsäuren DIN EN ISO 5508. Deutsches Institut für Normung e.V., Berlin: Beuth Verlag GmbH; 1995:1–8.
   Google Scholar
• DIN 51 732. Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods. DIN 51 732. Deutsches Institut für Normung e.V., Berlin: Beuth Verlag GmbH; 2008:1–10.
   Google Scholar
• DIN EN 14104. Erzeugnisse aus pflanzlichen und tierischen Fetten und Ölen - Fettsäure-Methylester (FAME) - Bestimmung Der Säurezahl Und Der Azidität. Deutsches Institut für Normung e.V., Berlin: Beuth Verlag GmbH; 1999;1–10.
   Google Scholar
• DIN EN 12662. Bestimmung der Verschmutzung in Mitteldestillaten DIN EN 12662. Deutsches Institut für Normung e.V., Berlin: Beuth Verlag GmbH; 1998:1–5.
   Google Scholar
• DIN EN 14107. Fat and oil derivatives - Fatty acid methylesters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry. DIN EN 14107. Deutsches Institut für Normung e.V., Berlin: Beuth Verlag GmbH; 2003:1–10.
   Google Scholar
• DIN-EN-ISO-10370. Bestimmung des Koksrückstandes. Deutsches Institut für Normung e.V.; 1995:1–8.
   Google Scholar
• DIN EN. Bestimmung des Calcium- und Magnesiumgehaltes. DIN EN 14538. Berlin: Beuth Verlag GmbH; 2002:1–7.
   Google Scholar
• DIN EN ISO 12937. Bestimmung des Wassergehaltes. 2002:1–12.
   Google Scholar
• Adriaans T. Suitability of solvent extraction for jatropha curcas. FACT. 2006;1–9.
   Google Scholar
• Remmele E, Thuneke K. Pre-standard DIN V 51605 for rapeseed oil fuel. Proceedings 15th European Biomass Conference & Exhibition, Biomass for Enery, Industry and Climate Protection. 7–11 May, 2007. Berlin, Germany; 2007.
   Google Scholar
• Knothe G. Analyzing biodiesel: standards and other methods. J Amer Oil Chem Soc. . 2006;83:823–833.
   Web of Science ®Google Scholar
• Ibrahim SMA, Abed KA, Gad MS, et al. Comparison of different methods for producing bio oil from Egyptian jatropha seeds. Biofuels. 2017;1–12.
   Google Scholar
• Ibrahim SMA, Abed K, Gad M, et al. Optimum oil yield from Egyptian Jatropha. Seeds Using Screw Press. 2017;17(1): 47–5.
   Google Scholar