New insight into air/spray boundary interaction for diesel and biodiesel fuels under different fuel temperatures

References

• Taghavifar H, Khalilarya S, Jafarmadar S. Computational and analytical measurement of air-fuel mixture uniformity and alternative fuels’ ignition delay in ICEs. Renew Energy. 2021;164:767–776.
   Web of Science ®Google Scholar
• Kuti OA, Nishida K, Zhu J. Experimental studies on spray and gas entrainment characteristics of biodiesel fuel: implications of gas entrained and fuel oxygen content on soot formation. Energy. 2013;57:434–442.
   Web of Science ®Google Scholar
• Bhikuning A, Sugawara R, Matsumura E, et al. Investigation of spray characteristics from waste cooking oil, bio-hydro fined diesel oil (BHD) and n-tridecane in a constant volume chamber. Case Stud Therm Eng. 2020;21:100661.
   Web of Science ®Google Scholar
• Liu H, Huo M, Liu Y, et al. Time-resolved spray, flame, soot quantitative measurement fueling n-butanol and soybean biodiesel in a constant volume chamber under various ambient temperatures. Fuel. 2014;133:317–325.
   Web of Science ®Google Scholar
• Cai G, Abraham J. Multidimensional simulations of non-reacting and reacting diesel and biodiesel sprays. Energy. 2017;119:1221–1229.
   Web of Science ®Google Scholar
• Delacourt E, Desmet B, Besson B. Characterisation of very high pressure diesel sprays using digital imaging techniques. Fuel. 2005;84(7-8):859–867.
   Web of Science ®Google Scholar
• Wakuri Y, Fujii M, Amitani T, et al. Studies on the penetration of fuel spray in a diesel engine. Bull JSME. 1960;3(9):123–130.
   Google Scholar
• Hiroyasu H, Arai M. Structures of fuel sprays in diesel engines. SAE Trans. 1990;1050–1061.
   Google Scholar
• Dent JC. A basis for the comparison of various experimental methods for studying spray penetration. SAE Trans. 1971;80:1881–1884.
   Google Scholar
• Zama Y, Ochiai W, Furuhata T, et al. Experimental study on spray angle and velocity distribution of diesel spray under high ambient pressure conditions. Atomiz Spr. 2011;21(12):989–1007.
   Web of Science ®Google Scholar
• Arai M. Diesel spray penetration and air entrainment. Proceedings of the 13th ICLASS CDROM, 2015.
   Google Scholar
• Zhou X, Li T, Lai Z, et al. Modeling diesel spray tip and tail penetrations after end-of-injection. Fuel. 2019;237:442–456.
   Web of Science ®Google Scholar
• Hossainpour S, Binesh AR. Investigation of fuel spray atomization in a DI heavy-duty diesel engine and comparison of various spray breakup models. Fuel. 2009;88(5):799–805.
   Web of Science ®Google Scholar
• Li ZH, He BQ, Zhao H. Application of a hybrid breakup model for the spray simulation of a multi-hole injector used for a DISI gasoline engine. Appl Therm Eng. 2014;65(1-2):282–292.
   Web of Science ®Google Scholar
• Wu S, Meinhart M, Petersen B, et al. Breakup characteristics of high speed liquid jets from a single-hole injector. Fuel. 2021;289:119784.
   Web of Science ®Google Scholar
• Zhang W, Liu H, Liu C, et al. Numerical analysis of jet breakup based on a modified compressible two-fluid-LES model. Fuel. 2019;254:115608.
   Web of Science ®Google Scholar
• Gao H, Li X, Xue J, et al. A modification to the WAVE breakup model for evaporating diesel spray. Appl Therm Eng. 2016;108:555–566.
   Web of Science ®Google Scholar
• Zhang X, He Z, Wang Q, et al. Effect of fuel temperature on cavitation flow inside vertical multi-hole nozzles and spray characteristics with different nozzle geometries. Exp Therm Fluid Sci. 2018;91:374–387.
   Web of Science ®Google Scholar
• Park J, Jang JH, Park S. Effect of fuel temperature on heavy fuel oil spray characteristics in a common-rail fuel injection system for marine engines. Ocean Eng. 2015;104:580–589.
   Web of Science ®Google Scholar
• Chen Z, Yao A, Yao C, et al. Effect of fuel temperature on the methanol spray and nozzle internal flow. Appl Therm Eng. 2017;114:673–684.
   Web of Science ®Google Scholar
• Feng Z, Zhan C, Tang C, et al. Experimental investigation on spray and atomization characteristics of diesel/gasoline/ethanol blends in high pressure common rail injection system. Energy. 2016;112:549–561.
   Web of Science ®Google Scholar
• Mohan B, Yang W, Yu W, et al. Numerical analysis of spray characteristics of dimethyl ether and diethyl ether fuel. Appl Energy. 2017;185:1403–1410.
   Web of Science ®Google Scholar
• Ma Y, Huang S, Huang R, et al. Spray and evaporation characteristics of n-pentanol–diesel blends in a constant volume chamber. Energy Convers Manage. 2016;130:240–251.
   Web of Science ®Google Scholar
• Huang H, Liu Q, Shi C, et al. Experimental study on spray, combustion and emission characteristics of pine oil/diesel blends in a multi-cylinder diesel engine. Fuel Process Technol. 2016;153:137–148.
   Web of Science ®Google Scholar
• Corral-Gómez L, Rubio-Gómez G, Martínez-Martínez S, et al. Effect of diesel-biodiesel-ethanol blends on the spray macroscopic parameters in a common-rail diesel injection system. Fuel. 2019;241:876–883.
   Web of Science ®Google Scholar
• Das M, Sarkar M, Datta A, et al. Study on viscosity and surface tension properties of biodiesel-diesel blends and their effects on spray parameters for CI engines. Fuel. 2018;220:769–779.
   Web of Science ®Google Scholar
• Park SH, Kim HJ, Suh HK, et al. Experimental and numerical analysis of spray-atomization characteristics of biodiesel fuel in various fuel and ambient temperatures conditions. Int J Heat Fluid Flow. 2009;30(5):960–970.
   Web of Science ®Google Scholar
• Mohan B, Yang W, Yu W. Effect of internal nozzle flow and thermo-physical properties on spray characteristics of methyl esters. Appl Energy. 2014;129:123–134.
   Web of Science ®Google Scholar
• Park SH, Kim HJ, Lee CS. Fuel spray and exhaust emission characteristics of an undiluted soybean oil methyl ester in a diesel engine. Energy Fuels. 2010;24(11):6172–6178.
   Web of Science ®Google Scholar
• Schiller L. A drag coefficient correlation. Zeit Ver Deutsch Ing. 1933;77:318–320.
   Google Scholar
• Ashgriz N, editor. Handbook of atomization and sprays: theory and applications. Berlin, Heidelberg, Germany: Springer Science & Business Media; 2011.
   Google Scholar
• Bianchi GM, Pelloni P. Modeling the diesel fuel spray breakup by using a hybrid model. SAE Technical Paper; 1999. p. 1999-01-0226.
   Google Scholar
• Reitz RD. Modeling atomization processes in high-pressure vaporizing sprays. Atomisation Spray Technol. 1987;3(4):309–337.
   Google Scholar
• Taghavifar H, Anvari S, Mousavi SH. Assessment of varying primary/secondary breakup mechanism of diesel spray on performance characteristics of HSDI engine. Fuel. 2020;262:116622.
   Web of Science ®Google Scholar
• Baumgarten C. Mixture formation in internal combustion engines. Berlin, Germany: Springer Science & Business Media; 2006.
   Google Scholar
• Zhai C, Jin Y, Nishida K, et al. Diesel spray and combustion of multi-hole injectors with micro-hole under ultra-high injection pressure–non-evaporating spray characteristics. Fuel. 2021;283:119322.
   Web of Science ®Google Scholar
• Park SH, Kim HJ, Suh HK, et al. A study on the fuel injection and atomization characteristics of soybean oil methyl ester (SME). Int J Heat Fluid Flow. 2009;30(1):108–116.
   Web of Science ®Google Scholar
• Jung H, Kittelson DB, Zachariah MR. Characteristics of SME biodiesel-fueled diesel particle emissions and the kinetics of oxidation. Environ Sci Technol. 2006;40(16):4949–4955.
   PubMed Web of Science ®Google Scholar
• Ghasemi A, Barron RM, Balachandar R. Spray-induced air motion in single and twin ultra-high injection diesel sprays. Fuel. 2014;121:284–297.
   Web of Science ®Google Scholar
• Battistoni M, Grimaldi CN. Numerical analysis of injector flow and spray characteristics from diesel injectors using fossil and biodiesel fuels. Appl Energy. 2012;97:656–666.
   Web of Science ®Google Scholar
• Yu S, Yin B, Deng W, et al. Experimental study on the spray and mixing characteristics for equilateral triangular and circular nozzles with diesel and biodiesel under high injection pressures. Fuel. 2019;239:97–107.
   Web of Science ®Google Scholar
• Duan RQ, Koshizuka S, Oka Y. Numerical and theoretical investigation of effect of density ratio on the critical weber number of droplet breakup. J Nucl Sci Technol. 2003;40(7):501–508.
   Web of Science ®Google Scholar
• Hawi M, Kosaka H, Sato S, et al. Effect of injection pressure and ambient density on spray characteristics of diesel and biodiesel surrogate fuels. Fuel. 2019;254:115674.
   Web of Science ®Google Scholar