References
- Maldague XPV. Theory and practice of infrared technology for non destructive testing. New York (NY): Wiley; 2001.
- Bison P, Ceseri M, Fasino D, et al. Domain derivative approach to active infrared thermography. Inverse Prob. Sci. Eng. 2010;18:873–889.10.1080/17415977.2010.492511
- Omar MA, Zhou Y. A quantitative review of three flash thermography processing routines. Infrared Phys. Technol. 2008;51:300–306.10.1016/j.infrared.2007.09.006
- Balageas DL. Defense and illustration of time-resolved pulsed thermography for NDE. Quant. InfraRed Thermogr. J. 2012;9:3–32.10.1080/17686733.2012.676902
- Shepard SM. Advances in pulsed thermography. Proc. SPIE – Int. Soc. Opt. Eng. 2001;4360:511–515.
- Busse G, Eyerer P. Thermal wave remote and nondestructive inspection of polymers. Appl. Phys. Lett. 1983;43:355–357.10.1063/1.94335
- Busse G, Wu D, Karpen W. Thermal wave imaging with phase sensitive modulated thermography. J. Appl. Phys. 1992;71:3962–3965.10.1063/1.351366
- Maldague X, Galmiche F, Ziadi A. Advances in pulsed phase thermography. Infrared Phys. Technol. 2002;43:175–181.10.1016/S1350-4495(02)00138-X
- Maldague X, Largouët Y, Couturier J-P. A study of defect depth using neural networks in pulsed phase thermography: modelling, noise, experiments. Rev. Gen. Therm. 1998;37:704–717.10.1016/S0035-3159(98)80048-2
- Maldague X, Marinetti S. Pulse phase infrared thermography. J. Appl. Phys. 1996;79:2694–2698.10.1063/1.362662
- Vavilov VP, Marinetti S. Pulsed phase thermography and fourier-analysis thermal tomography. Russ. J. Nondestr. Test. 1999;35:134–145.
- Mulaveesala R, Tuli S. Implementation of frequency-modulated thermal wave imaging for non-destructive sub-surface defect detection. Insight. 2005;47:206–208.10.1784/insi.47.4.206.63156
- Mulaveesala R, Panda SSB, Mude RN, et al. Non-destructive evaluation of concrete structures by non-stationary thermal wave imaging. Prog. Electromagn. Res. Lett. 2012;32:39–48.10.2528/PIERL12042005
- Mulaveesala R, Tuli S. Digitized frequency modulated thermal wave imaging for non-destructive testing. Mater. Eval. 2005;63:1046–1050.
- Mulaveesala R, Tuli S. Theory of frequency modulated thermal wave imaging for non-destructive subsurface defect detection. App. Phys. Lett. 2006;89:191913-1–191913-3.
- Gong J, Liu J, Qin L, et al. Investigation of carbon fiber reinforced polymer (CFRP) sheet with subsurface defects inspection using thermal-wave radar imaging (TWRI) based on the multi-transform technique. NDT and E I. 2014;62:130–136.10.1016/j.ndteint.2013.12.006
- Mulaveesala R, Vaddi JS, Singh P. Pulse compression approach to infrared non-destructive characterization. Rev. Sci. Instrum. 2008;79:094901-1–094901-6.
- Ghali VS, Jonnalagadda N, Mulaveesala R. Three-dimensional pulse compression for infrared nondestructive testing. IEEE Sens. J. 2009;9:832–833.10.1109/JSEN.2009.2024042
- Mulaveesala R, Ghali VS. Cross-correlation-based approach for thermal non-destructive characterisation of carbon fibre reinforced plastics. Insight. 2011;53:34–36.10.1784/insi.2011.53.1.34
- Mulaveesala R, Pal P, Tuli S. Interface study of bonded wafers by digitized linear frequency modulated thermal wave imaging. Sens. Actuators, A. 2006;128:209–216.10.1016/j.sna.2006.01.004
- Mulaveesala R, Venkata Ghali S. Coded excitation for infrared non-destructive testing of carbon fiber reinforced plastics. Rev. Sci. Instrum. 2011;82:054902-1–054902-4.
- Ghali VS, Panda SSB, Mulaveesala R. Barker coded thermal wave imaging for defect detection in carbon fibre-reinforced plastics. Insight. 2011;53:621–624.10.1784/insi.2011.53.11.621
- Dua G, Mulaveesala R. Applications of barker coded infrared imaging method for characterisation of glass fibre reinforced plastic materials. Electron. Lett. 2013;49(17):1071–1073.10.1049/el.2013.1661
- Arora V, Mulaveesala R, Bison P. Effect of spectral reshaping on frequency modulated thermal wave imaging for non-destructive testing and evaluation of steel material. J. Nondestr. Eval. 2016;35:1–7.
- Mulaveesala R, Ghali VS, Arora V. Applications of non-stationary thermal wave imaging methods for characterisation of fibre-reinforced plastic materials. Electron. Lett. 2013;49:118–119.10.1049/el.2012.3844
- Siddiqui JA, Arora V, Mulaveesala R, et al. Infrared thermal wave imaging for nondestructive testing of fibre reinforced polymers. Exp. Mech. 2015;55:1239–1245.10.1007/s11340-015-0019-z
- Mulaveesala R, Muniyappa A, Siddiqui JA, et al. Numerical approach to binary complementary Golay coded infrared thermal wave imaging. Proc. SPIE – Int. Soc. Opt. Eng. 2014;9105:91050T-1–91050T-6.
- Arora V, Mulaveesala R. Complementary coded thermal wave imaging scheme for thermal non-destructive testing and evaluation. QIRT-Asia 2015, CP0060, July 6–10, Mamallapuram, India. Paper QIRT Asia 2015 CP0060. Available from: http://qirt.org/dynamique/index.php?idD=72&Lang=0
- Subbarao GV, Mulaveesala R. Quadratic frequency modulated thermal wave imaging for non-destructive testing. Prog. Electromagnet. Res. M. 2012;26:11–22.10.2528/PIERM12062101
- Tabatabaei N, Mandelis A, Amaechi BT. Thermophotonic radar imaging: an emissivity-normalized modality with advantages over phase lock-in thermography. App. Phys. Lett. 2011;98:163706-1–163706-3.
- Borazjani E, Spinello D, Necsulescu DS. Determination of the modulation frequency for thermographic non-destructive testing. NDT and E Int. 2015;70:1–8.10.1016/j.ndteint.2014.12.001
- Carslaw HS, Jaeger JC. Conduction of heat in solids. Oxford: Clarendon Press; 1986.