References
- Taub AI, Krajewski PE, Luo AA, et al. The evolution of technology for materials processing over the last 50 years: the automotive example. JOM [Internet]. 2007;59:48–57. doi:10.1007/s11837-007-0022-7
- Miller WS, Zhuang L, Bottema J, et al. Recent development in aluminium alloys for the automotive industry. Mater. Sci. Eng. A. 2000;280:37–49.10.1016/S0921-5093(99)00653-X
- Dilthey U, Stein L. Multimaterial car body design: challenge for welding and joining. Sci. Technol. Weld. Join. [Internet]. 2006;11:135–142. Available from: http://www.maneyonline.com/doi/abs/10.1179/174329306X8596710.1179/174329306X85967
- Pickin CG, Young K. Evaluation of cold metal transfer (CMT) process for welding aluminium alloy. Sci. Technol. Weld. Joi. 2006;11:583–585. doi:10.1179/174329306X120886
- Furukawa K. New CMT arc welding process – welding of steel to aluminium dissimilar metals and welding of super-thin aluminium sheets. Weld. Int. 2006;20:440–445.10.1533/wint.2006.3598
- Feng J, Zhang H, He P. The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding. Mater. Des. [Internet]. 2009;30:1850–1852. doi:10.1016/j.matdes.2008.07.015
- Zhang HT, Feng JC, He P, et al. The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel. Mater. Sci. Eng. A. 2009;499:111–113.10.1016/j.msea.2007.11.124
- Borrisutthekul R, Yachi T, Miyashita Y, et al. Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy. Mater. Sci. Eng. A [Internet]. 2007;467:108–113. Available from: http://linkinghub.elsevier.com/retrieve/pii/S092150930700546110.1016/j.msea.2007.03.049
- Cao R, Chen JH, Chenb JH, et al. Weldability of CMT joining of AA6061 – T6 to boron steels with various coatings. Weld. J. [Internet]. 2014;93:193s–204s. Available from: https://app.aws.org/wj/supplement/WJ_2014_06_s193.pdf
- Dong H, Hu W, Duan Y, et al. Dissimilar metal joining of aluminum alloy to galvanized steel with Al–Si, Al–Cu, Al–Si–Cu and Zn–Al filler wires. J. Mater. Process. Technol. [Internet]. 2012;212:458–464. doi:10.1016/j.jmatprotec.2011.10.009
- Malmuth ND, Hall WF, Davis BI, et al. Transient thermal phenomena and weld geometry in GTAW. Weld. J. 1974;53:388–400.
- Lukens WE, Morris RA, Dunn EC. Infrared temperature sensing of cooling rates for arc welding control. 1981.
- Chin BA, Madsen NH, Goodlinc JS. Infrared thermography for sensing the arc welding process. 64th Annual AWS Convention. Philadelphia, PA; 1983; 227s–234s.
- Wang Y, Chin BA. On line sensing of weld penetration using infrared thermography. Paper presented at: 1986 Quebec Symposium. International Society for Optics and Photonics. Quebec City, Canada; 1986.
- Song J, Hardt D. Closed-loop control of weld pool depth using a thermally based depth estimator. Weld. J. 1993;72:471s–478s.
- Venkatraman B, Menaka M, Vasudevan M, et al. Thermography for online detection of incomplete penetration and penetration depth estimation. Paper presented at Asia Pacific Conference on NDT. Auckland, New Zealand; 2006.
- Bertrand P, Smurov I, Grevey D. Application of near infrared pyrometry for continuous Nd: YAG laser welding of stainless steel. Appl. Surf. Sci. [Internet]. 2000;168:182–185. Available from: http://linkinghub.elsevier.com/retrieve/pii/S0169433200005869\nhttp://www.sciencedirect.com/science/article/pii/S016943320000586910.1016/S0169-4332(00)00586-9
- Sreedhar U, Krishnamurthy CV, Balasubramaniam K, et al. Automatic defect identification using thermal image analysis for online weld quality monitoring. J. Mater. Process. Technol. [Internet]. 2012;212:1557–1566. doi:10.1016/j.jmatprotec.2012.03.002