139
Views
5
CrossRef citations to date
0
Altmetric
Original Articles

Proper orthogonal decomposition preprocessing of infrared images to rapidly assess stress-induced heat source fields

&
Pages 132-152 | Received 04 Mar 2016, Accepted 21 Nov 2016, Published online: 01 Feb 2017

References

  • Boulanger T, Chrysochoos A, Mabru C, et al. Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels. Int J Fatigue. 2004;26:221–229.10.1016/S0142-1123(03)00171-3
  • Chrysochoos A, Huon V, Jourdan F, et al. Use of full-field digital image correlation and infrared thermography measurements for the thermomechanical analysis of material behavior. Strain. 2010;46:117–130.10.1111/str.2009.46.issue-1
  • Chrysochoos A, Peyroux R. Experimental analysis and numerical modeling of thermomechanical couplings in solid materials (in French). Rev Gén Thermique. 1998;37:582–606.10.1016/S0035-3159(98)80036-6
  • Chrysochoos A, Louche H. An infrared image processing to analyse the calorific effects accompanying strain localization. Int J Eng Sci. 2000;38:1759–1788.10.1016/S0020-7225(00)00002-1
  • Balandraud X, Chrysochoos A, Leclercq S, et al. Influence of the thermomechanical coupling on the propagation of a phase change front. CR Acad Sci Ser IIb: Mec. 2001;329:621–626.
  • Pottier T, Louche H, Samper S, et al. Proposition of a modal filtering method to enhance heat source computation within heterogeneous thermomechanical problems. Int J Eng Sci. 2014;81:163–176.10.1016/j.ijengsci.2014.04.010
  • Delpueyo D, Balandraud X, Grédiac M. Heat source reconstruction from noisy temperature fields using an optimized derivative Gaussian filter. Infrared Phys Technol. 2013;60:312–322.10.1016/j.infrared.2013.06.004
  • Boulanger T. Infrared thermography analysis of heat sources induced by steel fatigue [ thesis in French]. Montpellier: University of Montpellier II, Sciences et Techniques du Languedoc; 2014.
  • Wattrisse B, Muracciole J-M, Chrysochoos A. Thermomechanical effects accompanying the localized necking of semi-crystalline polymers. Int J Therm Sci. April 2002;41:422–427.
  • Muracciole J-M, Wattrisse B, Chrysochoos A. Thermomechanical analysis of the yield behavior of semi-crystalline polymer. In: Proceedings of the 13th International Conference on Experimental Mechanics: Experimental Analysis of Nano and Engineering Materials and Structures, Editor Gdoutos E.-E; 2007, Alexandroupolis: Springer Netherlands; p. 871–872. doi:10.1007/978-1-4020-6239-1_433
  • Chrysochoos A, Wattrisse B, Muracciole J-M, et al. Fields of stored energy associated with localized necking of steel. J Mech Mater Struct. 2009;4:245–262.10.2140/jomms
  • Renault N, André S, Maillet D, et al. A spectral method for the estimation of a thermomechanical heat source from infrared temperature measurements. Int J Therm Sci. 2010;49:1394–1406.10.1016/j.ijthermalsci.2010.03.001
  • Louche H, Chrysochoos A. Thermal and dissipative effects accompanying Lüders band propagation. Mater Sci Eng A. 2001;307:15–22.10.1016/S0921-5093(00)01975-4
  • Benaarbia A, Chrysochoos A, Robert G. Fiber orientation effects on heat source distribution in reinforced polyamide 6.6 subjected to low cycle fatigue. J Eng Math. 2014;90:13–36.
  • Louche H, Schlosser P, Favier D, et al. Heat source processing for localized deformation with non-constant thermal conductivity: application to superelastic tensile tests of NiTi shape memory alloys. Exp Mech. 2012;52:1313–1328.10.1007/s11340-012-9607-3
  • Favier D, Louche H, Schlosser P, et al. Homogeneous and heterogeneous deformation mechanisms in an austenitic polycrystalline Ti-50.8 at % Ni thin tube under tension. Investigation via temperature and strain fields measurements. Acta Mater. 2007;55:5310–5322.10.1016/j.actamat.2007.05.027
  • Peyroux R, Chrysochoos A, Licht C, et al. Thermomechanical couplings and pseudoelasticity of shape memory alloys. Int J Eng Sci. 1998;36:489–509.10.1016/S0020-7225(97)00052-9
  • Delpueyo D, Grédiac M, Balandraud X, et al. Investigation of martensitic microstructures in a monocrystalline Cu–Al–Be shape memory alloy with the grid method and infrared thermography. Mech Mater. 2012;45:34–51.10.1016/j.mechmat.2011.09.007
  • Schlosser P, Louche H, Favier D, et al. Image processing to estimate the heat sources related to phase transformations during tensile tests of NiTi tubes. Strain. 2007;43:260–271.10.1111/str.2007.43.issue-3
  • Benaarbia A, Chrysochoos A, Robert G. Thermomechanical behavior of PA6.6 composites subjected to low cycle fatigue. Composites Part B: Eng. 2015;76:52–64.10.1016/j.compositesb.2015.02.011
  • Muracciole J-M, Wattrisse B, Chrysochoos A. Energy balance of a semi-crystalline polymer during local plastic deformation. Strain. 2008;44:468–474.10.1111/str.2008.44.issue-6
  • Ranc N, Blanche A, Ryckelynk D, et al. POD preprocessing of IR thermal data to assess heat source distributions. Exp Mech. 2014;55:725–739.
  • Phung N-L, Marti N, Blanche A, et al. Very high cycle fatigue for single phase ductile materials: slip band appearance criterion. 5th Fatigue Design Conference, Fatigue Design. Senlis. Elsevier. 2013;66:616–625.
  • Rosenfeld A, Kak A. Digital picture processing. New York (NY): Academic Press; 1982.
  • Algazi V, Sakrison D. On the optimality of Karhunen-Loève expansion. IEEE Trans. Inf. Theory. 1969;15:319–321.10.1109/TIT.1969.1054286
  • Holmes P, Lumley J, Berkooz G. Turbulence, coherent structures, dynamical systems and symmetry. Cambridge: Cambridge University Press; 1996.
  • Berkooz G, Holmes P, Lumley J-L. The proper orthogonal decomposition in the analysis of turbulent flows. Annu Rev Fluid Mech. 1993;25:539–575. doi:10.1146/annurev.fl.25.010193.002543
  • Graham M, Kevrekidis I. Alternative approaches to the Karhunen-Loève decomposition for model reduction and data analysis. Comput Chem Eng. 1996;20:495–506.10.1016/0098-1354(95)00040-2
  • Shvartsman S, Kevrekidis I. Low-dimensional approximation and control of periodic solutions in spatially extended systems. Phys Rev E. 1998;58:361–368.10.1103/PhysRevE.58.361
  • Shvartsman S, Theodoropoulos C, Rico-Martinez R, et al. Order reduction for nonlinear dynamic models of distributed reacting systems. J Process Control. 2000;10:177–184.10.1016/S0959-1524(99)00029-3
  • Kosambi D. Statistics in function space. J Indian Math Soc. 1943;7:76–88.
  • Karhunen K. Uber Lineare Methoden in der Wahrscheinlichkeitsrechnung [Linear methods in probability]. Ann Acad Sci Fennicae Ser A1 Math Phys. 1946;37:3–79.
  • Loeve M. Fonctions Aléatoires du Second Ordre [Second order random functions]. In: Levy P, editor. Processus stochastiques et mouvement Brownien [Stochastic processes and Brownian motion]. Paris: Gauthier-Villars; 1948.
  • Obukhov M-A. Statistical description of continuous fields. Tr Geophys Int Acad Nauk USSR. 1954;24:3–42.
  • Pougachev V-S. General theory of the correlations of random functions. Izv Akad Nauk USSR. 1953;17:1401–1402.
  • Watanabe S. Karhunen-Loève expansion and factor analysis theoretical remarks and applications. In: Proceedings of the 4th Conference on Information Theory, Prague, Czech Republic; Prague (NY): Academia Press; 1965.
  • Mees A-I, Rapp P-E, Jennings L-S. Singular value decomposition and embedding dimension. Phys Rev A. 1987;36:340–346.10.1103/PhysRevA.36.340
  • Ravindra B. Comments on the physical interpretation of proper orthogonal modes in vibrations. J Sound Vib. 1999;219:189–192.10.1006/jsvi.1998.1895
  • Berthel B, Wattrisse B, Chrysochoos A, et al. Thermographic analysis of fatigue dissipation properties of steel sheets. Strain. 2007;43:273–279.10.1111/str.2007.43.issue-3
  • Higham NJ. Matrix nearness problems and applications. In: Gover MJC and Barnett S, editors. Applications of matrix theory. Oxford: Clarendon Press, 1989; p. 1–27.
  • Hubert L, Meuleman J, Heiser W. Two purposes for matrix factorization: a historical appraisal. SIAM Rev. 2000;42:68–82.10.1137/S0036144598340483
  • Thomson W, Kelvin Lord. On the thermo-elastic and thermomagnetic properties of matter, Part I (dated 10th March, 1855). Q J Math. 1857:57–77.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.