262
Views
0
CrossRef citations to date
0
Altmetric
ARTICLE

Particle Effects on Penetration and Solidification of Flowing Mixed Melts on Metal Structures

, , , , &
Pages 1214-1222 | Received 24 Dec 2010, Accepted 19 Apr 2011, Published online: 05 Jan 2012

References

  • Theofanous , T. G. and Bell , C. R. 1986 . “An assessment of clinch river breeder reactor core disruptive accident energetic” . Nucl. Sci. Eng. , 93 : 215
  • Menzenhauer , P. , Peppler , W. and Will , H. 1986 . “Material movement, relocation and inter-subassembly propagation in bundles under simulated accident conditions (Out-of-pile experiments with thermite)” . In Sci. Technol. Fast Reactor Safety 373 BNES, London
  • Brear , D. J. 1997 . Modeling of Fuel Freezing for Reactor Safety Analysis , PNC ZN9410 97–063 Commercial proprietary, Power Reactor and Nuclear Fuel Development Corporation .
  • Sienicki , J. J. , Spencer , B. W. Vetter , D. L. 1985 . “Freezing controlled penetration of molten metals flowing through stainless steel tubes” . In ANS Proc. 1985 National Heat Transfer Conf. 245 Denver , , USA Aug. 4–7, 1985
  • Fieg , G. , Henkel , P. Moschke , M. 1986 . “Freezing phenomena of flowing melts in nonmelting and melting tubes” . In Sci. Technol. Fast Reactor Safety 335 BNES, London
  • Ramacciotti , M. , Journeau , C. Sudreau , F. 2001 . “Viscosity models for corium melts” . Nucl. Eng. Des. , 204 : 377
  • Kamiyama , K. , Brear , D. J. Tobita , Y. 2006 . “Establishment of freezing model for reactor safety analysis” . J. Nucl. Sci. Technol. , 43 ( 10 ) : 1206
  • Kondo , Sa. , Konishi , K. Isozaki , M. 1995 . “Experimental study on simulated molten jet-coolant interactions” . Nucl. Eng. Des. , 155 : 73
  • El-genk , M. and Cronenberg , A. W. 1978 . “An assessment of fuel freezing and drainage phenomena in a reactor shield plug following a core disruptive accident” . Nucl. Eng. Des. , 47 ( 2 ) : 195
  • Peppler , W. , Kaiser , A. and Will , H. 1988 . “Freezing of a thermite melt injected into an annular channel-experiments and recalculations” . Exp. Thermal Fluid Sci. , 1 ( 4 ) : 335
  • Rahman , M. M. , Hino , T. Morita , K. 2007 . “Experimental investigation of molten metal freezing on to a structure” . Exp. Thermal Fluid Sci. , 32 ( 1 ) : 198
  • Hossain , M. K. , Himoro , Y. Morita , K. 2008 . “Experimental study on molten metal penetration and freezing behavior in pin-buddle geometry” . Memoirs Faculty Eng. , 68 ( 4 ) : 163 Kyushu University
  • Morita , K. , Yamano , H. Tobita , Y. 2003 . SIMMER-III/IV Heat-and Mass-Transfer Model—Model and Method Description , JNC TN9400 2003–047 Japan Nuclear Cycle Development Institute .
  • Kim , C. S. 1975 . Thermophysical Properties of Stainless Steels , ANL-75–55 Argonne National Laboratory .
  • Fauske , H. K. , Koyama , K. and Kubo , S. 2002 . “Assessment of FBR core disruptive accident (CDA): The role and application of general behavior principles (GBPs)” . J. Nucl. Sci. Technol. , 39 ( 6 ) : 615
  • Liu , W. , Wang , G. X. and Matthys , E. F. 1995 . “Thermal analysis and measurements for a molten metal drop impacting on a substrate: Cooling, solidification and heat transfer coefficient” . Int. J. Heat Mass Transfer , 38 ( 8 ) : 1387
  • Stephen , D. T. and Fernandez-Pello , A. C. 1998 . “On the flight paths of metal particles and embers generated by power lines in high winds—A potential source of wild land fires” . Fire Saf. J. , 30 : 333 – 356 .
  • Roger , W. 2009 . “Mass, weight, density or specific gravity of different metals, density of materials” . In United Kingdom: SImetric. co.uk. http://www.simetric.co.uk/si metals.htm
  • Thomas , D. G. 1965 . “Transport characteristics of suspension: VIII. A note on the viscosity of Newtonian suspensions of uniform spherical particles” . J. Colloid Sci. , 20 : 267
  • Sundar , L. S. and Sharma , K. V. 2008 . “Experimental determination of thermal conductivity of fluid containing oxide nanoparticles” . Int. J. Dynamics Fluids , 4 ( 1 ) : 57 – 69 .
  • Tao , R. and Xu , X. 2006 . “Reducing the viscosity of crude oil by pulsed electric or magnetic field” . Energy Fuels , 20 : 2046 – 2051 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.