A comparison of design practice of bored piles/drilled shafts between Europe and North America

References

• ACI Committee 318. 2014. Building code requirements for structural concrete: (ACI 318-14); and commentary (ACI 318R-14). Farmington Hills, MI: American Concrete Institute.
   Google Scholar
• American Association of State Highway and Transportation Officials. 2016. Aashto LRFD bridge design specifications. Washington, DC, American Association of State Highway and Transportation Officials.
   Google Scholar
• Ata, A. and O’Neill, M. W. 1998. Sidewall stability and side-shear resistance in bored piles constructed with high molecular-weight polymer slurry. Proceedings of the 3rd International Geotechnical Seminar on Deep Foundations on Bored and Auger Piles, Balkema, Rotterdam, 111–117.
   Google Scholar
• Beckhaus, K. 2016. Concrete for Deep Foundations. ISSMGE - ETC 3 International Symposium on Design of Piles in Europe. Leuven, Belgium, 28 & 29 April 2016.
   Google Scholar
• Bieniawski, Z. T. 1989. Engineering rock mass classifications: a complete manual for engineers and geologists in mining, civil, and petroleum engineering. New York, NY: Wiley-Interscience, pp. 40–47 . ISBN 0-471-60172-1.
   Google Scholar
• Bottiau, M. 2006. Recent evolutions in deep foundation technologies-General report. Proceedings of the 10th International Conference on Piling and Deep Foundations, Amsterdam.
   Google Scholar
• Bottiau, M. 2014. Installation parameters, pile performance and importance of testing. Proceedings of the 12th International Conference on Piling and Deep Foundations, Stockholm.
   Google Scholar
• British Standards Institution. 1995. Eurocode 7; London, British Standards Institution.
   Google Scholar
• British Standards Institution. 1996. Eurocode 8: design provisions for earthquake resistance of structures; London, British Standards Institution.
   Google Scholar
• Brown, D. A. 2002. The effect of construction on axial capacity of drilled foundations in piedmont soils. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 128(12), 967–973. doi: 10.1061/(ASCE)1090-0241(2002)128:12(967)
   Web of Science ®Google Scholar
• Brown, D. A., Muchard, M. and Khouri, B. 2002. The effect of drilling fluid on axial capacity, Cape Fear River, NC. Proceedings of the Deep Foundations Institute 27th Annual Meeting, San Diego.
   Google Scholar
• Brown, D., Turner, J. and Castelli, R. 2010. Drilled shafts: construction procedures and LRFD design methods. In: FHWA/NHI publication 10-016, reference manual and participants guide for national highway institute. Course 132014, 972.
   Google Scholar
• EFFC/DFI Concrete Task Group. 2015. The EFFC/DFI Best Practice Guide to tremie Concrete for Deep Foundations. http://www.effc.org/content/uploads/2016/02/EFFC_Tremie_Concrete_Guide_Final.pdf.
   Google Scholar
• EN 1997-1. 2004. “Eurocode 7: Geotechnical design – Part 1: General rules” Authority: The European Union Per Regulation 305/2011, Directive 98/34/EC, Directive 2004/18/EC.
   Google Scholar
• EN 1997-2. 2007. “Eurocode 7: Geotechnical design – Part 2: Ground investigation and testing” Authority: The European Union Per Regulation 305/2011, Directive 98/34/EC, Directive 2004/18/EC.
   Google Scholar
• European Committee for Standardization. 1999. EN 1536: Execution of Special Geotechnical Work. Deutsches Institut für Normung e. V.
   Google Scholar
• Huemmeler, L., Hoffmann, N. and von Jutzrenka B. 2014. A new piling technology for Europe’s new tallest building: the Lakhta tower. Proceedings of the 12th International Conference on Piling and Deep Foundations, Stockholm.
   Google Scholar
• International Code Council. 2011. 2012 international building code; Country Club Hills, IL, ICC.
   Google Scholar
• Lam, C., Troughton, V., Jefferis, S. and Suckling, T. 2010a. Effect of support fluids on pile performance – a field trial in East London. Ground Engineering, 43(10), 28–31.
   Google Scholar
• Marinos, P. and Hoek, E. 2000. GSI – A geologically friendly tool for rock mass strength estimation. Proceedings of GeoEng2000 Conference, Melbourne, 1422–1442.
   Google Scholar
• O'Neill, M. W. 2001. Side resistance in piles and drilled shafts, the 34th terzaghi lecture. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 127(1), 1–16. doi: 10.1061/(ASCE)1090-0241(2001)127:1(3)
   Web of Science ®Google Scholar
• O’Neill, M. W. and Reese, L. C. 1999. Drilled shafts: construction procedures and design methods, Report No. FHWA-IF-99-025, FHWA, Washington, DC, 758.
   Google Scholar
• Poulos, H. 2003. Analysis of soil extraction for correcting uneven settlement of pile foundations. Twelfth Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (12ARC), Asia: World Scientific Publishing.
   Google Scholar
• Spearin v. U.S. 1918. (248 U.S. 132 (1918)), 135–136.
   Google Scholar
• Van Weele, A. F. 1988. Cast-in-situ piles – installation methods, soil disturbance and resulting pile behavior. Proceedings, Deep Foundations on Bored and Auger Piles, Van Impe (ed.), Balkema, Rotterdam, 219–226.
   Google Scholar
• Zaghouani, K., Chouikha, A. and Haffoudhi, S. 2013. Difficulty execution of large diameter deep piles in soft soils. Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paper No. 3058.
   Google Scholar