628
Views
31
CrossRef citations to date
0
Altmetric
Articles

A numerical analysis of the stress distribution in backfilled stopes considering nonplanar interfaces between the backfill and rock walls

, , &
Pages 271-282 | Received 20 Oct 2015, Accepted 11 Dec 2015, Published online: 06 Jan 2016

References

  • Archibald, J. F. 1999. Beneficial impacts of paste tailings on environmental hazard mitigation and engineering performance improvement, Int. Min. Environment Congress: Clean Technology: Third Millennium Challenge, July 12–16, Lima, 537–548.
  • Askew, J. E., McCarthy, P. L. and Fitzgerald, D. J. 1978. Backfill research for pillar extraction at ZC/NBHC, Proc. Mining with Backfill: 12th Canadian Rock Mechanics Symposium, May 23–15, Sudbury, Ontario, 100–110.
  • Aubertin, M., Bussière, B. and Bernier, L. 2002. Environnement et gestion des rejets miniers [Environment and mine wastes management] (CD-ROM), Presses Internationales Polytechnique, Montréal ( in French).
  • Belem, T., Harvey, A., Simon, R. and Aubertin, M. 2004. Measurement and prediction of internal stresses in an underground opening due to backfilling with cemented paste, Proc. 15th Int. Symp. on Ground Support in Mining and Underground Construction: Ground Support, Perth, Western Australia, Taylor and Francis Group, London.
  • Benzaazoua, M., Bussière, B., Demers, I., Aubertin, M., Fried, É. and Blier, A. 2008. Integrated mine tailings management by combining environmental desulphurization and cemented paste backfill: application to mine Doyon, Quebec, Canada, Minerals Engineering, 21, (4), 330–340.10.1016/j.mineng.2007.11.012
  • Blight, G. E. 2006. Assessing loads on silos and other bulk storage structures: research applied to practice, Taylor & Francis/Balkema, Rotterdam.
  • Caceres, C. A. B. 2005. Effect of delayed backfill on open stope mining methods, M.A.Sc. thesis, University of British Columbia, Vancouver.
  • CGS. 2006. Canadian foundation engineering manual, Canadian Geotechnical Society, BiTech Publisher, Richmond, British Columbia, Canada.
  • Darling, P. 2011. SME mining engineering handbook (3rd ed.), Society for Mining, Metallurgy and Exploration (SME), Denver.
  • Das, B. M. 2015. Principles of foundation engineering (8th ed.), Cengage Learning, Boston, MA.
  • Dirige, P. 2003. Engineering design of paste backfill systems, PhD thesis, Queen’s University, Kingston.
  • Falaknaz, N. 2014. Analysis of geomechanical behavior of two adjacent backfilled stopes based on two and three dimensional numerical simulations, PhD thesis, Polytechnique Montreal, Montreal.
  • Falaknaz, N., Aubertin, M. and Li, L. 2015. A numerical investigation of the geomechanical response of adjacent backfilled stopes, Canadian Geotechnical Journal, 52, (10), 1507–1525.
  • Fall, M. and Nasir, O. 2010. Mechanical behaviour of the interface between cemented tailings backfill and retaining structures under shear loads, Geotechnical and Geological Engineering, 28, (6), 779–790.10.1007/s10706-010-9338-0
  • Grabinsky, M. W. 2010. In situ monitoring for ground truthing paste backfill designs, Proc. 13th Int. Seminar on Paste and Thickened Tailings, May 3–6, Toronto, ON. Australian Centre for Geomechanics, Crawley, 85–98.
  • Grabinsky, M. W. and Bawden, W. F. 2007. In situ measurements for geomechanical design of cemented paste backfill systems, Proc. 9th Int. Symp. in Mining with Backfill (CD-ROM), Montréal, Quebec.
  • Handy, R. L. and Spangler, M. G. 2007. Geotechnical engineering: soil and foundations principles and practice (5th ed.), McGraw Hill, New York, NY.
  • Hartman, H. L. 1992. SME mining engineering handbook (2nd ed.), Vol. 1, Society for Mining, Metallurgy and Exploration Inc., Englewood (Denver), CO.
  • Itasca. 2012. FLAC3D: fast Lagrangian analysis of continua, user’s guide, Itasca Consulting Group, Minneapolis, MN.
  • Janssen, H. A. 1895. Versuche über Getreidedruck in Silozellen [Experiments on grain pressure in silos], Zeitschrift des Vereins Deutscher Ingenieure [Journal of the Association of German Engineers], 39, (35), 1045–1049 (in German).
  • Knutsson, S. 1981. Stresses in the hydraulic backfill from analytical calculations and in-situ measurements, Proc. Conf. Application of Rock Mech. to Cut and Fill Mining, (eds. O Stephansson and MJ Jones), Institution of Mining and Metallurgy, London, 261–268.
  • Li, L. and Aubertin, M. 2009. Numerical investigation of the stress state in inclined backfilled stopes, International Journal of Geomechanics, 9, (2), 52–62.10.1061/(ASCE)1532-3641(2009)9:2(52)
  • Li, L. and Aubertin, M. 2015. Numerical analysis of the stress distribution in symmetrical backfilled trenches with inclined walls, Indian Geotechnical Journal, 45, (3), 278–290.10.1007/s40098-014-0131-5
  • Li, L., Aubertin, J. D. and Dubé, J.-S. 2014. Stress distribution in a cohesionless backfill poured in a silo, Open Civil Engineering Journal, 8, 1–8.10.2174/1874149501408010001
  • Liu, G. S., Li, L., Yang, X. C. and Guo, L. J. 2015. A numerical analysis of the stress distribution in backfilled stopes considering interfaces between the backfill and rock walls, International Journal of Geomechanics., (under review).
  • Manaras, S. 2009. Investigations of backfill-rock mass interface failure mechanisms, M.A.Sc. thesis, Queen’s University, Kingston, Ontario.
  • Marston, A. 1930. The theory of external loads on closed conduits in the light of latest experiments, Bulletin No.96, Iowa Engineering Experiment Station, Iowa State College, Ames, IA.
  • McCarthy, D. F. 2007. Essentials of soil mechanics and foundations: basic geotechnics (7th ed.), Pearson Prentice Hall, Toronto, 1–864.
  • Morgenstern, N. R., Vick, S. G. and van Zyl, D. 2015. Independent expert engineering investigation and review panel: report on Mount Polley tailings storage facility breach, the Government of the Province of British Columbia.
  • Nasir, O. and Fall, M. 2008. Shear behaviour of cemented pastefill-rock interfaces, Engineering Geology, 101, (3–4), 146–153.10.1016/j.enggeo.2008.04.010
  • O’Neal, T. S. and Hagerty, D. J. 2011. Earth pressures in confined cohesionless backfill against tall rigid walls—a case history, Canadian Geotechnical Journal, 48, (8), 1188–1197.10.1139/t11-033
  • Pirapakaran, K. 2008. Load-deformation characteristics of minefills with particular reference to arching and stress developments, PhD thesis, James Cook University, Townsville.
  • Pirapakaran, K. and Sivakugan, N. 2007a. A laboratory model to study arching within a hydraulic fill stope. Geotechnical Testing Journal, 30, (6), 1–8.
  • Pirapakaran, K. and Sivakugan, N. 2007b. Arching within hydraulic fill stopes, Geotechnical and Geological Engineering, 25, (1), 25–35.10.1007/s10706-006-0003-6
  • Rankine, R. M. 2004. The geotechnical characterization and stability analysis of BHP billinton’s cannington mine paste fill, PhD thesis, James Cook University, Townsville.
  • le Roux, K., Bawden, W. F. and Grabinsky, M. F. 2005. Field properties of cemented paste backfill at the Golden Giant mine, Transactions of The Institution of Mining and Metallurgy: Mining Technology., 114, (2), 65–80.
  • Shukla, S. K. and Gaurav, N. 2009. A simplified extension of the conventional theory of arching in soils, International Journal of Geotechnical Engineering, 3, (3), 353–359.10.3328/IJGE.2009.03.03.353-359
  • Shukla, S. K., Loughran, J. G. and Sivakugan, N. 2009. Stress within a cohesionless granular fill in a storage vessel with sloping walls during initial static loading, Powder Technology, 192, (3), 389–393.10.1016/j.powtec.2009.01.011
  • Singh, S., Sivakugan, N. and Shukla, S. K. 2010. Can Soil Arching Be Insensitive to ϕ? International Journal of Geomechanics, 10, (3), 124–128.10.1061/(ASCE)GM.1943-5622.0000047
  • Sivakugan, N., Widisinghe, S. and Wang, V. Z. 2013. Vertical stress determination within backfilled mine stopes, International Journal of Geomechanics, 14, (5), 1–5.
  • Take, W. A. and Valsangkar, A. J. 2001. Earth pressures on unyielding retaining walls of narrow backfill width, Canadian Geotechnical Journal, 38, (6), 1220–1230.10.1139/t01-063
  • Thompson, B. D., Bawden, W. F. and Grabinsky, M. W. 2012. In situ measurements of cemented paste backfill at the Cayeli mine, Canadian Geotechnical Journal, 49, (7), 755–772.10.1139/t2012-040
  • Thompson B. D., Grabinsky, M. W., Bawden, W. F. and Counter, D. B. 2009. In-situ measurements of cemented paste backfill in long-hole stopes, ROCKENG09: Proc. 3rd CANUS Rock Mech. Symp., (eds. M. Diederichs and G. Grasselli), May 9–15, University of Toronto, Toronto, ON, Paper 4061.
  • Ting, C. H., Shukla, S. K. and Sivakugan, N. 2011. Arching in soils applied to inclined mine stopes, International Journal of Geomechanics, 11, (1), 29–35.10.1061/(ASCE)GM.1943-5622.0000067
  • Ting, C. H., Sivakugan, N. and Shukla, S. K. 2012. Laboratory simulation of the stresses within inclined stopes, Geotechnical Testing Journal, 35, (2), 1–15.
  • Ting, C. H., Sivakugan, N., Read, W. and Shukla, S. K. 2014. Analytical expression for vertical stress within an inclined mine stope with non-parallel walls, Geotechnical and Geological Engineering, 32, (2), 577–586.10.1007/s10706-014-9735-x
  • Veenstra, R. L. 2013. A design procedure for determining the in situ stresses of early age cemented paste backfill, PhD thesis, University of Toronto, Toronto.
  • Veenstra, R. L., Bawden, W. F., Grabinsky, M. W. and Thompson, B. D. 2011a. An approach to stope scale numerical modelling of early age cemented paste backfill, 45th US Rock Mech./Geomech. Symp., American Rock Mechanics Association, San Francisco.
  • Veenstra, R. L., Bawden, W. F., Grabinsky, M. W. and Thompson, B.D. 2011b. Matching stope scale numerical modelling results of early age cemented paste backfill to in situ instrumentation results, 64th Can. Geotech. Conf., Toronto, Canada.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.