Correlations of permanent strain and damping coefficients with resilient modulus for coarse-grained subgrade soils

References

• Brinkgreve, R. B., M. H. Kappert, and P. G. Bonnier. 2007. “Hysteric Damping in a Small-Strain Stiffness Model.” In Numerical Model in Geomechanics, 737–742. Abingdon, UK: Taylor & Francis Group.
   Google Scholar
• Graves, R. C., and K. C. Mahboub. 2006. “Pilot Study in Sampling-Based Sensitivity Analysis of NCHRP Design Guide for Flexible Pavements.” Transportation Research Record 1947: 123–135. doi:10.3141/1947-12.
   Google Scholar
• Guo, Z. Y., H. L. Zhang, L. Cong, and Q. J. Gao. 2006. “Permanent Deformation Of Subgrade Soils.” In Analysis of Asphalt Pavement Materials and Systems, 156–169. Reston, VA: ASCE
   Google Scholar
• Hossain, Z., M. Zaman, C. Doiron, and P. Solanki. 2011. “Evaluation of Mechanistic-Empirical Design Guide Input Parameters for Resilient Modulus of Subgrade Soils in Oklahoma.” Journal of Testing and Evaluation 39 (5): 803–814.
   Web of Science ®Google Scholar
• Jadoun, F. M., and Y. R. Kim. 2012. “Calibrating Mechanistic-Empirical Pavement Design Guide for North Carolina.” Transportation Research Record 2305: 131–140. doi:10.3141/2305-14.
   Google Scholar
• Johanneck, L., and L. Khazanovich. 2010. “Comprehensive Evaluation of Effect of Climate in Mechanistic Empirical Pavement Design Guide Predictions.” Transportation Research Record 2170: 45–55. doi:10.3141/2170-06.
   Google Scholar
• Kim, D., and J. R. Kim. 2007. “Resilient Behavior of Compacted Subgrade Soils under the Repeated Triaxial Test.” Construction and Building Materials No.21: 1470–1479. doi:10.1016/j.conbuildmat.2006.07.006.
   Web of Science ®Google Scholar
• Korkiala, T. L., and A. Dawson. 2007. “Relating Full-Scale Pavement Rutting to Laboratory Permanent Deformation Testing.” International Journal of Pavement Engineering. 8 (1): 19–28. doi:10.1080/10298430600783509.
   Google Scholar
• Lo Presti, D. C., S. Pedroni, A. Cavallaro, M. Jamiolkowski, and O. Pallara. 1997. “Shear Modulus and Damping of Soils.” Geotechnique 47: 603–617. doi:10.1680/geot.1997.47.3.603.
   Web of Science ®Google Scholar
• Malla, R. B., and S. Joshi. 2007. “Resilient Modulus Prediction Models Based on Analysis of LTPP Data for Subgrade Soils and Experimental Verifications.” International Journal of Transportation Engineering 133 (9): 491–504. doi:10.1061/(ASCE)0733-947X(2007)133:9(491).
   Web of Science ®Google Scholar
• Orobio, A., and J. P. Zaniewski. 2011. “Sampling-Based Sensitivity Analysis of the Mechanistic-Empirical Pavement Design Guide Applied to Material Inputs.” Transportation Research Record, No 2226: 85–93. doi:10.3141/2226-09.
   Google Scholar
• Pereira, C., S. Nazarian, and A. G. Correia. 2017. “Extracting Damping Information from Resilient Modulus Tests.” Journal of Materials in Civil Engineering 29: 04017233. doi:10.1061/(ASCE)MT.1943-5533.0002089.
   Web of Science ®Google Scholar
• Puppala, A. J., L. N. Mohammad, and A. Allen. 1999. “Permanent Deformation Characterization of Subgrade Soils from RLT Test.” Journal of Materials in Civil Engineering 11 (4): 274–282. doi:10.1061/(ASCE)0899-1561(1999)11:4(274).
   Web of Science ®Google Scholar
• Puppala, A. J., S. Saride, and S. Chomtid. 2009. “Experimental and Modeling Studies of Permanent Strains of Subgrade Soils.” Journal of Geotechnical and Geoenvironmental Engineering 135 (10): 1379–1389. doi:10.1061/(ASCE)GT.1943-5606.0000163.
   Web of Science ®Google Scholar
• Rahman, M. M., and S. L. Gassman (2018). “Moisture Effect of Subgrade Resilient Modulus on Pavement Rutting.” Transportation research board 97th annual meeting, Washington, DC, No. 18-01303.
   Google Scholar
• Rahman, M. M., and S. L. Gassman. 2019. “Effect Of Resilient Modulus Of Undisturbed Subgrade Soils on Pavement Rutting.” International Journal Of Geotechnical Engineering 13 (2): 152-161. doi:10.1080/19386362.2017.1328773.
   Web of Science ®Google Scholar
• Rollins, K. M., M. G. Travis, and H. K. Ku. 2009. “Increased Lateral Abutment Resistance from Gravel Backfills of Limited Width.” Journal of Geotechnical and Geoenvironmental Engineering 136: 230–238. doi:10.1061/(ASCE)GT.1943-5606.0000195.
   Web of Science ®Google Scholar
• Saxena, P., D. Tompkins, L. Khazanovich, and T. Balbo. 2010. “Evaluation of Characterization and Performance Modeling of Cementitiously Stabilized Layers in the Mechanistic-Empirical Pavement Design Guide.” Transportation Research Record 2186: 111–119. doi:10.3141/2186-12.
   Google Scholar
• Saxena, S. K., and K. Reddy. 1989. “Dynamic Moduli and Damping Factors Ratios of Monterey No. 0 Sand by Resonant Column.” Soils Foundation 29: 37–51. doi:10.3208/sandf1972.29.2_37.
   Google Scholar
• Seed, H. B., R. T. Wong, I. M. Idriss, and K. Tokimatsu. 1986. “Moduli and Damping Factors for Dynnamic Analyses of Cohesionless Soils.” Journal of Geotechnical Engineering 112: 1016–1032. doi:10.1061/(ASCE)0733-9410(1986)112:11(1016).
   Google Scholar
• Sherif, M. A., I. Ishibashi, and A. H. Gaddah. 1977. “Damping Ratio for Dry Sands.” Journal of Geotechnical Engineering 103: 743–756.
   Google Scholar
• Singh, D., M. Zaman, and S. Commuri. 2011. “Evaluation of Measured and Estimated Dynamic Moduli for Selected Asphalt Mixed.” Journal of ASTM International 8 (9): 1–19.
   Google Scholar
• Thompson, M. R., and D. Neumann. 1993. “Rutting Rate Analyses of the AASHTO Road Tests Flexible Pavements.” In Transportation Research Board Annual Meeting, 36–48.
   Google Scholar
• Titi, H. H., R. English, and A. Faheem. 2015. “Resilient Modulus of Fine-Grained Soils for Mechanistic-Empirical Pavement Design.” Transportation Research Record 2510: 24–35. doi:10.3141/2510-04.
   Google Scholar
• Ullidtz, P. 1993. “Mathematical Model of Pavement Performance under Moving Wheel Load.” Transportation Research Record 1384: 94–99.
   Google Scholar
• Witczak, M. W. NCHRP 1-28A. 2003. “Harmonized Test Method for Laboratory Determination Of Resilient Modulus for Flexible Pavement Design.”
   Google Scholar
• Xiao, Y., E. Tutumluer, and D. Mishra. 2015. “Performance Evaluation of Unbound Aggregate Permanent Deformation Models for Various Aggregate Physical Properties.” Transportation Research Record 2525: 20–30. doi:10.3141/2525-03.
   Google Scholar
• Xu, Q., M. Ruiz, M. Moravec, and R. O. Rasmussen. 2013. “Simulation of Unbound Material Resilient Modulus Effects on Mechanistic-Empirical Pavement Designs.” Material and Structures 46 (7): 1089–1100. doi:10.1617/s11527-012-9955-6.
   Web of Science ®Google Scholar
• Yau, A., and H. L. Von Quintos. 2004. “Predicting Elastic Response Characteristics of Unbound Materials and Soils.” Transportation Research Record 1874: 47–56. doi:10.3141/1874-06.
   Google Scholar
• Zaghloul, S., A. Ayed, A. A. Halim, N. Vitillo, and R. Sauber. 2006. “Investigations of Environmental and Traffic Impacts on Mechanistic-Empirical Pavement Design Guide Predictions.” Transportation Research Record 1967: 148–159.
   Google Scholar
• Zapata, C. E., D. Andrei, M. W. Witczak, and W. N. Houston. 2007. “Incorporation of Environmental Effects in Pavement Design.” Transportation Research Record 2282: 22–23. doi:10.3141/2282-03.
   Google Scholar
• Zhang, J., R. D. Andrus, and C. H. Juang. 2005. “Normalized Shear Modulus and Material Damping Ratio Relationships.” Journal of Geotechnical and Geoenvironmental Engineering 131: 453–464. doi:10.1061/(ASCE)1090-0241(2005)131:4(453).
   Web of Science ®Google Scholar
• Zhou, C., B. Huang, E. Drumm, S. Xiang, D. Qiao, and S. Udeh. 2014. “Soil Resilient Modulus Regressed from Physical Properties and Influence of Seasonal Variation on Asphalt Pavement Performance.” Journal of Transportation Engineering 141 (1): 1–9.
   Google Scholar