References
- Airey, DW, and RB Kelly (2010) “Interface Behaviours from Large Diameter Ring Shear Tests.” In: JD Frost (ed) Proceedings of the Research Symposium on Characterization and Behavior of Interfaces. IOS Press, Amsterdam, Netherlands, pp 1–6
- Alawneh, AS, AI Husein Malkawi, and H Al-Deeky. 1999. “Tension tests on smooth and rough model piles in dry sand.” Can Geotech Journal 36 (4): 746–753. doi:https://doi.org/10.1139/t98-104.
- Arab, MG, M Omar, E Alotaibi, Mostafa, O, Naeem, Ma and Badr, O. 2020.“Bio-Inspired 3D-Printed Honeycomb for Soil Reinforcement.“ Geo-Congress 2020, Minneapolis, Minnesota, . Reston, Virginia, United States: American Society of Civil Engineers, February 25–28, 2020. 262–271. doi:https://doi.org/10.1061/9780784482834.029.
- ASTM D5321. 2020. “Standard test method for determining the shear strength of soil-geosynthetic and geosynthetic-geosynthetic interfaces by direct shear.“ ASTM International doi:https://doi.org/10.1520/D5321.
- Bacas, BM, J Cañizal, and H Konietzky. 2015. “Shear strength behavior of geotextile/geomembrane interfaces.” Journal of Rock Mechanics and Geotechnical Engineering 7 (6): 638–645. doi:https://doi.org/10.1016/j.jrmge.2015.08.001.
- Benz, MJ, AE Kovalev, and SN Gorb. 2012. “Anisotropic frictional propQ9 erties in snakes.“ Bioinspiration, Biomimetics and Bioreplication 8339: 83390X. doi:https://doi.org/10.1117/12.916972.
- Bergado, DT, G V. Ramana, HI Sia, and V Varun. 2006. “Evaluation of interface shear strength of composite liner system and stability analysis for a landfill lining system in Thailand.” Geotextiles and Geomembranes 24 (6): 371–393. doi:https://doi.org/10.1016/j.geotexmem.2006.04.001.
- Chavez-Sagarnaga, J, JM Buick, JY Ooi, Pankaj P, Campbell M and Greated CA. 2008. “Frictional properties of pellets and silo wall materials for the investigation of silo honking“. International Congress for Particle Technology, PARTEC 2004. Nuremberg, Germany.
- DeJong, JT, M Burrall, DW Wilson, and JD Frost. 2017. “A bio-inspired perspective for geotechnical engineering innovation“. Geotechnical Frontiers 2017 March 15-17, 2017 Orlando, Florida, USA. 862–870. doi:https://doi.org/10.1061/9780784480472.092.
- DeJong, JT, and E Kavazanjian. 2019. “Bio-mediated and Bio-inspired Geotechnics Lu, Ning, Mitchell, James K.” In Geotechnical Fundamentals for Addressing New World Challenges Springer Series in Geomechanics and Geoengineering, 193–207. Cham: Springer.
- Doanh, T, MT Hoang, JN Roux, and C Dequeker. 2013. “Stick-slip behaviour of model granular materials in drained triaxial compression.” Granul Matter 15 (1): 1–23. doi:https://doi.org/10.1007/s10035-012-0384-6.
- Dove, JE, and JD Frost. 1996. “A method for measuring geomembrane surface roughness.” Geosynthetics International 3 (3): 369–392. doi:https://doi.org/10.1680/gein.3.0067.
- Dove, JE, and JD Frost. 1999. “Peak friction behavior of smooth geomembrane-particle interfaces.” Journal of Geotechnical and Geoenvironmental Engineering 125 (7): 544–555. doi:https://doi.org/10.1061/(ASCE)1090-0241(1999)125:7(544).
- Dove, JE, and JB Jarrett. 2002. “Behavior of dilative sand interfaces in a geotribology framework.” Journal of Geotechnical and Geoenvironmental Engineering 128 (1): 25–37. doi:https://doi.org/10.1061/(ASCE)1090-0241(2002)128:1(25).
- Fowmes, GJ, N Dixon, L Fu, and CA Zaharescu. 2017. “Rapid prototyping of geosynthetic interfaces: investigation of peak strength using direct shear tests.” Geotextiles and Geomembranes 45 (6): 674–687. doi:https://doi.org/10.1016/j.geotexmem.2017.08.009.
- Fowmes, GJ, N Dixon, and CA Zaharescu. 2016. “3D printing of high strength geosynthetic interfaces.“ GeoAmericas 2016 April 2016 Miami Beach, USA. 1698–1708.
- Frost, JD, and JT DeJong. 2005. “In situ assessment of role of surface roughness on interface response.” Journal of Geotechnical and Geoenvironmental Engineering 131 (4): 498–511. doi:https://doi.org/10.1061/(ASCE)1090-0241(2005)131:4(498).
- Frost, JD, and T Karademir. 2016. “Shear-induced changes in smooth geomembrane surface topography at different ambient temperatures.” Geosynthetics International 23 (2): 113–128. doi:https://doi.org/10.1680/jgein.15.00036.
- Frost, JD, D Kim, and S Lee. 2012. “Microscale geomembrane-granular material interactions.” KSCE Journal of Civil Engineering 16 (1): 79–92. doi:https://doi.org/10.1007/s12205-012-1476-x.
- Frost, JD, and SW Lee. 2001. “Microscale study of geomembrane-geotextile interactions (A).” Geosynthetics International 8 (6): 577–597. doi:https://doi.org/10.1680/gein.8.0207.
- Fuggle, AR (2011) Geomaterial Gradation Influences on Interface Shear Behavior. ( Doctoral Dissertation), Georgia Institute of Technology, Atlanta, USA
- Gray, J. 1946. “The mechanism of locomotion in snakes.” The Journal of Experimental Biology 23 (2): 101–120. doi:https://doi.org/10.1242/jeb.23.2.101.
- Hazel, J, M Stone, MS Grace, and V V Tsukruk. 1999. “Nanoscale design of snake skin for reptation locomotions via friction anisotropy.” Journal of Biomechanics 32 (5): 477–484. doi:https://doi.org/10.1016/s0021-9290(99)00013-5.
- Hebeler, GL, JD Frost, and AT Myers. 2005. “Quantifying hook and loop interaction in textured geomembrane-geotextile systems.” Geotextiles and Geomembranes 23 (1): 77–105. doi:https://doi.org/10.1016/j.geotexmem.2004.06.002.
- Helms, M, SS Vattam, and AK Goel. 2009. “Biologically inspired design: process and products.” Design Studies 30 (5): 606–622. doi:https://doi.org/10.1016/j.destud.2009.04.003.
- Hryciw, RD, and M Irsyam. 1993. “Behavior of sand particles around rigid ribbed inclusions during shear.” Japanese Soc Soil Mech Found Engineering 33 (3): 1–13. doi:https://doi.org/10.3208/sandf1972.33.3_1.
- Huang, L, and A Martinez. 2020. “Study of interface frictional anisotropy at bioinspired soil-structure interfaces with compliant asperities.“ Geo-Congress 2020: Biogeotechnics, Minneapolis, Minnesota, Reston, VA: American Society of Civil Engineers, February 25-28, 2020. 253–261. doi:https://doi.org/10.1061/9780784482834.028.
- Huang, L, and A Martinez. 2021. “Load transfer anisotropy at snakeskin-inspired clay-structure interfaces.“ International Foundations Congress and Equipment Expo 2021, Dallas, Texas, Reston, VA, USA: American Society of Civil Engineers, May 10–14, 2021. 119–129. doi:https://doi.org/10.1061/9780784483428.013.
- Irsyam, M, and RD Hryciw. 1991. “Friction and passive resistance in soil reinforced by plane ribbed inclusions.” Geotechnique 41 (4): 485–498. doi:https://doi.org/10.1680/geot.1991.41.4.485.
- Jagota, A, and CY Hui. 2011. “Adhesion, friction, and compliance of bio-mimetic and bio-inspired structured interfaces.” Materials Science & Engineering R: Reports 72: 253–292. doi:https://doi.org/10.1016/j.mser.2011.08.001.
- Jayne, BC. 1986. “Kinematics of terrestrial snake locomotion.” Copeia 1986 (4): 915–927. doi:https://doi.org/10.2307/1445288.
- Jayne, B C.; Jayne BC. 2020. “What defines different modes of snake locomotion?” Integrative and Comparative Biology 60 (1): 156–170. doi:https://doi.org/10.1093/icb/icaa017.
- Jewell, RA, GWE Milligan, RW Sarsby, and D Dubois. 1984. “Interaction between Soil and Geogrids.” In Polymer Grid Reinforcements, 18–30. London, UK: Thomas Telford Limited.
- Koerner, RM. 2005. Designing with Geosynthetics, Fifth. New Jersey: Pearson Education, .
- Koerner, RM, and TY Soong. 2000. “Leachate in Landfills: The Stability Issues.” Geotextiles and Geomembranes 18 (5): 293–309. doi:https://doi.org/10.1016/S0266-1144(99)00034-5.
- Liu, Z, W Yin, D Tao, and Y Tian. 2015. “A glimpse of superb tribological designs in nature.” Biotribology 1–2: 11–23. doi:https://doi.org/10.1016/j.biotri.2015.02.002.
- Maladen, R, Y Ding, C Li, and DI Goldman. 2009. “Undulatory swimming in sand: subsurface locomotion of the sandfish lizard.” Science 80-) 325 (5938): 314–318. doi:https://doi.org/10.1126/science.1172490.
- Martinez, A, J Dejong, I Akin, A. Aleali, C. Arson, J. Atkinson, P. Bandini, et al. 2021. “Bio-inspired geotechnical engineering: principles, current work, opportunities and challenges.” Géotechnique 1–19. doi:https://doi.org/10.1680/jgeot.20.p.170.
- Martinez, A, and JD Frost. 2017. “The Influence of surface roughness form on the strength of sand–structure Interfaces.” Géotechnique Lett 7 (1): 104–111. doi:https://doi.org/10.1680/jgele.16.00169.
- Martinez, A, and S Palumbo. 2018. “Anisotropic Shear Behavior of Soil-Structure Interfaces: Bio-Inspiration from Snake Skin.“ IFCEE 2018 Orlando, Florida, Reston, VA, USA: American Society of Civil Engineers, March 5–10, 2018. 94–104. doi: https://doi.org/10.1061/9780784481592.010.
- Martinez, A, S Palumbo, and BD Todd. 2019. “Bioinspiration for anisotropic load transfer at soil-structure interfaces.” Journal of Geotechnical and Geoenvironmental Engineering 145 (10): 04019074-1-04019074–14. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0002138.
- Marvi, H, J Bridges, and DL Hu. 2013. “Snakes mimic earthworms: propulsion using rectilinear travelling waves.” Journal of the Royal Society, Interface / the Royal Society 10 (84): 20130188. doi:https://doi.org/10.1098/rsif.2013.0188.
- McCartney, JS., JG. Zornberg, and Jr. RH Swan. 2009. “Analysis of a large database of GCL-geomembrane interface shear strength results.” Journal of Geotechnical and Geoenvironmental Engineering 135 (2): 169–176. doi:https://doi.org/10.1061/(ASCE)1090-0241(2009)135:2(209).
- O’Hara, KB, and A Martinez. 2020. “Monotonic and cyclic frictional resistance directionality in snakeskin-inspired surfaces and piles.” Journal of Geotechnical and Geoenvironmental Engineering 146 (11): 04020116. doi:https://doi.org/10.1061/(asce)gt.1943-5606.0002368.
- Paikowsky, S, C Player, P Connors, and P.J Connors. 1995. “A dual interface apparatus for testing unrestricted friction of soil along solid surfaces.” Geotechnical Testing Journal 18 (2): 168–193. doi:https://doi.org/10.1520/GTJ10320J.
- Pant, A, G V. Ramana, and M Datta. 2019. “Stick-slip behavior of dry fly ash.” Particulate Science and Technology. 1–12. doi:https://doi.org/10.1080/02726351.2019.1571543.
- Powers, MC. 1953. “A new roundness scale for sedimentary particles.” Journal of Sedimentary Research 23: 117–119. doi:https://doi.org/10.1306/D4269567-2B26-11D7-8648000102C1865D.
- Read, HE, and GA Hegemier. 1984. “Strain softening of rock, soil and concrete - a review article.” Mechanics of Materials: An International Journal 3 (4): 271–294. doi:https://doi.org/10.1016/0167-6636(84)90028-0.
- Rousé, PC, RJ Fannin, and DA Shuttle. 2008. “Influence of roundness on the void ratio and strength of uniform sand.” Geotechnique 58 (3): 227–231. doi:https://doi.org/10.1680/geot.2008.58.3.227.
- Roussel, LE (2005) Experimental investigation of stick-slip behavior in granular materials. ( Dissertation) Louisiana State University and Agricultural and Mechanical College, Louisiana, USA
- Stark, TD, TA Williamson, and HT Eid. 1996. “HDPE geomembrane/geotextile interface shear strength.” Journal of Geotechnical Engineering 122 (3): 197–203. doi:https://doi.org/10.1061/(ASCE)0733-9410(1996)122:3(197).
- Stathas, D, JP Wang, and HI Ling. 2017. “Model geogrids and 3d printing.” Geotextiles and Geomembranes 45 (6): 688–696. doi:https://doi.org/10.1016/j.geotexmem.2017.07.006.
- Stutz, HH, A Martinez, L Heepe, H. Tram Tramsen, S N. Gorb. 2019. “Strength anisotropy at soil-structure interfaces with snake skin inspired structural surfaces.” E3S Web Conf 92:1–6. doi:https://doi.org/10.1051/e3sconf/20199213008.
- Terzaghi, K. 1943. Theoretical Soil Mechanics. New York: JohnWiley & Sons.
- Uesugi, M, and H Kishida. 1986a. “Influential factors of friction between steel and dry sands.” Soils Found 26 (2): 33–46. doi:https://doi.org/10.3208/sandf1972.26.2_33.
- Uesugi, M, and H Kishida. 1986b. “Frictional resistance at yield between dry sand and mild steel.” Soils Found 26 (4): 139–149. doi:https://doi.org/10.3208/sandf1972.26.4_139.
- Vangla, P, and ML Gali. 2016a. “Shear behavior of sand-smooth geomembrane interfaces through micro-topographical analysis.” Geotextiles and Geomembranes 44 (4): 592–603. doi:https://doi.org/10.1016/j.geotexmem.2016.04.001.
- Vangla, P, and ML Gali. 2016b. “Effect of particle size of sand and surface asperities of reinforcement on their interface shear behaviour.” Geotextiles and Geomembranes 44 (3): 254–268. doi:https://doi.org/10.1016/j.geotexmem.2015.11.002.
- Vangla, P, and GM Latha. 2017. “Surface topographical analysis of geomembranes and sands using a 3D optical profilometer.” Geosynthetics International 24 (2): 151–166. doi:https://doi.org/10.1680/jgein.16.00023.
- Vangla, P, N Roy, and ML Gali. 2018. “Image based shape characterization of granular materials and its effect on kinematics of particle motion.” Granul Matter 20 (1). doi:https://doi.org/10.1007/s10035-017-0776-8.
- Vangla, P, BA Wala, VL Gayathri, and JD Frost. 2022. “Snakeskin-inspired patterns for frictional anisotropic behaviour of split set rock bolts.” Géotechnique Lett 12 (2): 1–6. doi:https://doi.org/10.1680/jgele.21.00076.
- Xiao, Y, L Long, TM Evans, H. Zhou, H. Liu, A W. Stuedlein. 2019. “Effect of particle shape on stress-dilatancy responses of medium-dense sands.” Journal of Geotechnical and Geoenvironmental Engineering 145 (2): 1–15. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0001994.
- Zhao, L, and M Karim. 2018. “Use of geosynthetic materials in solid waste landfill design: a review of geosynthetic related stability issues.” Ann Civ Environ Eng 2: 006–015. doi:https://doi.org/10.29328/journal.acee.1001010.
- Zhong, W, H Liu, Q Wang, Zhang W, Li Y, Ding X and Chen L. 2021. “Investigation of the penetration characteristics of snake skin-inspired pile using DEM.” Acta geotechnica 2. doi:https://doi.org/10.1007/s11440-020-01132-2.