388
Views
9
CrossRef citations to date
0
Altmetric
Original Articles

Effect of injection timing, injector opening pressure and nozzle geometry on the performance of a compression ignition engine operated on non-edible oil methyl esters from different sources

, , , , , & show all
Pages 71-81 | Received 11 Jun 2012, Accepted 09 Jan 2013, Published online: 25 Mar 2013

REFERENCES

  • Agarwal, A. K.2006. “Biofuels (Alcohols and Biodiesel) Applications as Fuels for Internal Combustion Engines.” Progress in Energy and Combustion Science33: 233–271.
  • Atadashi, I. M., M. K.Aroua, and A.Abdul Aziz. 2010. “High Quality Biodiesel and Its Diesel Engine Application: A Review.” Journal of Renewable and Sustainable Energy Reviews14 (7): 1999–2008.
  • AydinHüseyin, and HasanBayindir. 2010. “Performance and Emission Analysis of Cottonseed Oil Methyl Ester in a Diesel Engine.” Renewable Energy35: 588–592.
  • Banapurmath, N. R., P. G. Tewari, Y. H. Basavarajappa, and V. S. Yaliwal. 2005. “Performance of Honge (Pongamia pinnata) Oil Blends in a Diesel Engine.” Paper presented at the XIX NCICEC, Annamalai University, Chidambaram, India, 1 – 6.
  • Banapurmath, N. R., P. G.Tewari, and R. S.Hosmath. 2008. “Combustion and Emission Characteristics of a Direct Injection, Compression–Ignition Operated on Honge Oil, HOME and Blends of HOME and Diesel.” International Journal of Sustainable Engineering1 (2): 80–93.
  • Banapurmath, N. R., P. G.Tewari, and R. S.Hosmath. 2009. “Effect of Biodiesel Derived from Honge Oil and Its Blends with Diesel when Directly Injected at Different Injection Pressures and Injection Timings in Single-Cylinder Water-Cooled Compression Ignition Engine.” Proceedings [universal] of Institute of Mechanical Engineers IMechE.Part A: Journal of Power and Energy223: 323–332.
  • Bari, S., T. H.Lim, and C. W.Yu. 2002. “Effect of Preheating of Crude Palm Oil (CPO) on Injection System, Performance and Emission of a Diesel Engine.” Renewable Energy27: 339–351.
  • Bari, S., C. W.Yu, and T. H.Lim. 2004. “Effect of Fuel Injection Timing with Waste Cooking Oil as a Fuel in Direct Injection Diesel Engine.” Proceedings [universal] of Institute of Mechanical Engineers IMechE.Part D, Journal of Automobile Engineering218: 93–104.
  • Basha, Syed Ameer, K.Raja Gopal, and S.Jebaraj. 2009. “A Review on Biodiesel Production, Combustion, Emissions and Performance.” Renewable and Sustainable Energy Reviews13: 1628–1634.
  • Fan, Xiaohu, XiWang, FengChen, P.Daniel Geller, and Peter, J.Wan. 2008. “Engine Performance Test of Cottonseed Oil Biodiesel.” The Open Energy and Fuels Journal1: 40–45.
  • Gajendra Babu, M. K.2007. “Studies on Performance and Exhaust Emissions of a CI Engine Operating on Diesel and Diesel Biodiesel Blends at Different Injection Pressures and Injection Timings.” Society of Automotive Engineers, Paper No.: 2007-01-0613.
  • Gajendra Babu, M. K., ChandanKumar, and L. M.Das. 2006. Experimental Investigations on a Karanja Oil Methyl Ester Fuelled DI Diesel Engine. Society of Automotive Engineers, Paper No.: 2006-01-0238.
  • Hountalas, D. T., D. A.Kouremenos, K. B.Binder, A.Raab, and M. H.Schnabel. 2001. “Using Advanced Injection Timing and EGR to Improve DI Engine Efficiency at Acceptable NO and Soot Levels.” Society of Automotive Engineers, Paper No.: 2001-01-0199.
  • Karnwal, A., NaveenKumar, M. M.Hasan, R.Chaudhary, A. N.Siddiquee, and Z. A.Khan. 2010. “Production of Biodiesel from Thumba Oil: Optimization of Process Parameters, Iranica.” Journal of Energy & Environment1 (4): 352–358.
  • Martin, Leenus Jesu M., and GeoEdwin. 2011. “Effect of Diesel Addition on the Performance of Cottonseed Oil Fuelled DI Diesel Engine.” International Journal of Energy and Environment2 (2): 321–330.
  • Morshed, Mahbub, KanizFerdous, M. R.Khan, M. S. I.Mazumder, M. A.Islam, and Md. T.Uddin. 2011. “Rubber Seed Oil as a Potential Source for Biodiesel Production in Bangladesh.” Fuel90: 2981–2986.
  • Murugesan, A., C.Umarani, R.Subramanian, and N.Nedunchezhian. 2009. “Bio-Diesel as an Alternative Fuel for Diesel Engines – A Review.” Renewable and Sustainable Energy Reviews13 (3): 653–662.
  • NabiNurun Md., MustafizurRahman Md., and Shamim Md.Akhter. 2009. “Biodiesel from Cotton Seed Oil and Its Effect on Engine Performance and Exhaust Emissions.” Applied Thermal Engineering29: 2265–2270.
  • Naga Sarada, S., M.Shailaja, A. V.Sita Rama Raju, and K.Kalyani Radha. 2010. “Optimization of Injection Pressure for a Compression Ignition Engine with Cotton Seed Oil as an Alternate Fuel.” International Journal of Engineering, Science and Technology2 (6): 142–149.
  • Onga, H. C., T. M. I.Mahlia, H. H.Masjukia, and R. S.Norhasyimab. 2011. “Comparison of Palm Oil, Jatropha curcas and Calophyllum inophyllum for Biodiesel.” Renewable and Sustainable Energy Reviews15 (3): 501–3515.
  • PuhanSukumar, R.Jegan, K.Balasubbramanian, and G.Nagarajan. 2009. “Effect of Injection Pressure on Performance, Emission and Combustion Characteristics of High Linolenic Linseed Oil Methyl Ester in a DI Diesel Engine.” Renewable Energy34: 1227–1233.
  • Raheman, H., and A. G.Phadatare. 2004. “Diesel Engine Emissions and Performance from Blends of Karanja Methyl Ester and Diesel.” Biomass and Bioenergy27: 393–397.
  • Rakopoulos, C. D., D. C.Rakopoulos, E. G.Giakoumis, and A. M.Dimaratos. 2010. “Investigation of the Combustion of Neat Cottonseed Oil or Its Neat Bio-Diesel in a HSDI Diesel Engine by Experimental Heat Release and Statistical Analyses.” Fuel89 (12): 3814–3826.
  • Ramadhas, A. S., C.Muraleedharan, and S.Jayaraj. 2005a. “Performance and Emission Evaluation of a Diesel Engine Fueled with Methyl Esters of Rubber Seed Oil.” Renewable Energy30: 1789–1800.
  • Ramadhas, A. S., C.Muraleedharan, and S.Jayaraj. 2005b. “Characterization and Effect of Using Rubber Seed Oil as Fuel in the Compression Ignition Engines.” Renewable Energy30: 795–803.
  • Rosli, Abu Bakar, Semin, and Abdul RahimIsmail. 2008. “Fuel Injection Pressure Effect on Performance of Direct Injection Diesel Engines Based on Experiment.” American Journal of Applied Sciences5 (3): 197–202.
  • Roy, M. M.2009. “Effect of Fuel Injection Timing and Injection Pressure on Combustion and Odorous Emissions in DI Diesel Engine.” Journal of Energy Resources Technology, ASME Transactions131: 1–8.
  • Sahoo, P. K., L. M.Das, M. K. J.Babu, and S. N.Naik. 2007. “Biodiesel Development from High Acid Value Polanga Seed Oil and Performance Evaluation in a CI Engine.” Fuel86: 448–454.
  • Sahoo, P. K., L. M.Das, M. K. J.Babu, P.Arora, V. P.Singh, N. R.Kumar, and T. S.Varyani. 2009. “Comparative Evaluation of Performance and Emission Characteristics of Jatropha, Karanja and Polanga Based Biodiesel as Fuel in a Tractor Engine.” Fuel88: 1698–1707.
  • Selvabala, V. S., Dinesh K.S., Jalagandeeswaran, K., Premkumar, M.P., and SivanesanS.2011. “Two-Step Biodiesel Production from Calophyllum inophyllum Oil: Optimization of Modified b-Zeolite Catalyzed Pre-Treatment.” Bioresource Technology102: 1066–1072.
  • Tao, F., Y.Liu, B. H.Rempel Ewert, D. E.Foster, R. D.Reitz, D.Choi, and P. C.Miles. 2005. “Modelling the Effect of EGR and Retarded Injection on Soot Formation in a High Speed Diesel Injection (HSDI) Diesel Engine Using a Multi Step Phenomenological Soot Model.” Society of Automotive Engineers, Paper No.: 2005 -01-0121.
  • Venkanna, B. K., and C.Venkataramana Reddy. 2011. “Performance, Emission and Combustion Characteristics of Direct Injection Diesel Engine Running on Calophyllum inophyllum Linn oil (Honne oil).” International Journal of Agricultural & Biological Engineering4 (1): 26–34.
  • Yang, Ru, MengxingSu, JianchunZhang, FuqiangJin, ChunhongZha, MinLi, and XinminHao. 2011. “Biodiesel Production from Rubber Seed Oil Using Poly (sodium acrylate) Supporting NaOH as a Water-Resistant Catalyst.” Bioresource Technology102: 2665–2671.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.