Characterising energy and eco-efficiency of injection moulding processes

References

• Aoe, T.2007. “Eco-Efficiency and Ecodesign in Electrical and Electronic Products.” Journal of Cleaner Production15 (15): 1406–1414.
   Web of Science ®Google Scholar
• Boothroyd, G., P.Dewhurst, and W.Knight. 2002. Product Design for Manufacture and Assembly. 2nd ed.New York: Marcel Dekker.
   Google Scholar
• Cheng, J., Y.Feng, J.Tan, and W.Wei. 2008. “Optimization of Injection Mold Based on Fuzzy Moldability Evaluation.” Journal of Materials Processing Technology208 (1–3): 222–228.
   Web of Science ®Google Scholar
• Chien, J. M., and D. Dornfeld. 2013. “Semi-Empirical Modeling of the Energy Consumed During the Injection Molding Process.” Paper presented at the 20th CIRP International Conference on Life Cycle Engineering, Singapore, April 17–19.
   Google Scholar
• Diaz, N., F. Redelsheimer, and D. Dornfeld. 2011. “Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use.” Paper presented at the 18th CIRP International Conference on Life Cycle Engineering, Braunschweig, Germany, May 2–4.
   Google Scholar
• Dietmair, A., and A. Verl. 2008. “Energy Consumption Modelling and Optimization for Production Machines.” Paper presented at the IEEE International Conference on Sustainable Energy Technologies, Singapore, November 24–27.
   Google Scholar
• Dimla, D. E., M.Camilotto, and F.Miani. 2005. “Design and Optimisation of Conformal Cooling Channels in Injection Moulding Tools.” Journal of Materials Processing Technology164–165: 1294–1300.
   Web of Science ®Google Scholar
• Duflou, J. R., J. W.Sutherland, D.Dornfeld, C.Herrmann, J.Jeswiet, S.Kara, M.Hauschild, and K.Kellens. 2012. “Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach.” CIRP Annals – Manufacturing Technology61 (2): 587–609.
   Web of Science ®Google Scholar
• Ecoinvent Centre. 2010. Ecoinvent Data V. 2.2, Ecoinvent Reports No. 1–25. Duebendorf: Swiss Centre for Life Cycle Inventories.
   Google Scholar
• Fischer, J. M.2003. Handbook of Molded Part Shrinkage and Warpage. 1st ed.Norwich, NY: William Andrew.
   Google Scholar
• Forrest, M. J., A. M.Jolly, S. R.Holding, and S. J.Richards. 1995. “Emissions from Processing Thermoplastics.” The Annals of Occupational Hygiene39 (1): 35–53.
   Web of Science ®Google Scholar
• Garnaut, R.2011. “The Garnaut Climate Change Review: Final Report.” Accessed October 1, 2012. http://www.garnautreview.org.au/chp7.htm.
   Google Scholar
• Gosato, D. V.2000. Injection Molding Handbook. 3rd ed.Berlin: Springer.
   Google Scholar
• Gutowski, T. G.2010. “The Efficiency and Eco-Efficiency of Manufacturing.” International Journal of Nanomanufacturing6 (1–4): 38–45.
   Google Scholar
• Gutowski, T., J. Dahmus, and A. Thiriez. 2006. “Electrical Energy Requirements for Manufacturing Processes.” Paper presented at the 13th CIRP International Conference on Life Cycle Engineering, Leuven, Belgium, May 31–June 2.
   Google Scholar
• Huppes, G., and M.Ishikawa. 2005. “A Framework for Quantified Eco-Efficiency Analysis.” Journal of Industrial Ecology9 (4): 25–41.
   Web of Science ®Google Scholar
• Kamoun, A., M.Jaziri, and A.Chaabouni. 2009. “The Use of the Simplex Method and Its Derivatives to the On-Line Optimization of the Parameters of an Injection Moulding Process.” Chemometrics and Intelligent Laboratory Systems96 (2): 117–122.
   Web of Science ®Google Scholar
• Kara, S., G. Bogdanski, and W. Li. 2011. “Electricity Metering and Monitoring in Manufacturing Systems.” Keynote presented at the 18th CIRP International Conference on Life Cycle Engineering, Braunschweig, Germany, May 2–4.
   Google Scholar
• Kara, S., and W.Li. 2011. “Unit Process Energy Consumption Models for Material Removal Processes.” CIRP Annals – Manufacturing Technology60 (1): 37–40.
   Web of Science ®Google Scholar
• Kellens, K., W.Dewulf, M.Overcash, M. Z.Hauschild, and J. R.Duflou. 2012. “Methodology for Systematic Analysis and Improvement of Manufacturing Unit Process Life-Cycle Inventory (UPLCI) – CO2PE! Initiative (Cooperative Effort on Process Emissions in Manufacturing). Part 1: Methodology Description.” The International Journal of Life Cycle Assessment17 (1): 69–78.
   Web of Science ®Google Scholar
• Kicherer, A., S.Schaltegger, H.Tschochohei, and B. F.Pozo. 2007. “Eco-Efficiency Combining Life Cycle Assessment and Life Cycle Costs Via Normalization.” The International Journal of Life Cycle Assessment12 (7): 537–543.
   Web of Science ®Google Scholar
• Li, W., and S.Kara. 2011. “An Empirical Model for Predicting Energy Consumption of Manufacturing Processes: A Case of Turning Process.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture225 (9): 1636–1646.
   Web of Science ®Google Scholar
• Li, W., M.Winter, S.Kara, and C.Herrmann. 2012. “Eco-Efficiency of Manufacturing Processes: A Grinding Case.” CIRP Annals – Manufacturing Technology61 (1): 59–62.
   Web of Science ®Google Scholar
• Liang, J. Z., and J. N.Ness. 1996. “The Calculation of Cooling Time in Injection Moulding.” Journal of Materials Processing Technology57 (1–2): 62–64.
   Web of Science ®Google Scholar
• Mattis, J., P. Sheng, W. DiScipio, and K. Leong. 1996. “A Framework for Analyzing Energy Efficient Injection-Molding Die Design.” Paper presented at the IEE International Symposium on Electronics and the Environment, Dallas, USA, May 6–8.
   Google Scholar
• Montgomery, D. C.2008. Design and Analysis of Experiments. 7th ed.New York: Wiley.
   Google Scholar
• Qureshi, F., W. Li, S. Kara, and C. Herrmann. 2012. “Unit Process Energy Consumption Models for Material Addition Processes: A Case of the Injection Moulding Process.” Paper presented at the 19th CIRP International Conference on Life Cycle Engineering, Berkeley, USA, May 23–25.
   Google Scholar
• Rees, H.2002. Mold Engineering. 2nd ed.Cincinnati: Hanser Gardner Publication.
   Google Scholar
• Sinkin, C., C. J.Wright, and R. D.Burnett. 2008. “Eco-Efficiency and Firm Value.” Journal of Accounting and Public Policy27 (2): 167–176.
   Web of Science ®Google Scholar
• SPI (The Society of the Plastics Industry). 2003. “Mold Standards and Classifications.” Accessed October 3, 2013. http://www.plasticsindustry.org/.
   Google Scholar
• Stelson, K.2003. “Calculating Cooling Times for Polymer Injection Moulding.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture217 (5): 709–713.
   Web of Science ®Google Scholar
• Sundmaeker, H., T. Spiering, S. Kohitz, and C. Herrmann. 2013. “Injection Mould Design: Impact on Energy Efficiency in Manufacturing.” Paper presented at the 20th CIRP International Conference on Life Cycle Engineering, Singapore, April 17–19.
   Google Scholar
• Thiriez, A.2006. “An Environmental Analysis of Injection Molding.” Master diss., MIT.
   Google Scholar
• UNEP (United Nations Environment Programme). 2009. “Converting Waste Plastics into a Resource.” Accessed October 3, 2013. http://www.unep.or.jp/Ietc/Publications/spc/WastePlasticsEST_Compendium.pdf.
   Google Scholar
• WBCSD (World Business Council for Sustainable Development). 2000. “Eco-efficiency: creating more value with less impact.” Accessed October 1, 2012. http://www.wbcsd.org/web/publications/eco_efficiency_creating_more_value.pdf.
   Google Scholar