Comparative study on effect of blending, thermal barrier coating (LHR) and injector nozzle geometry on biodiesel-fuelled engines

References

• Agarwal, D., and A. K. Agarwal. 2007. “Performance and Emissions Characteristics of Jatropha Oil (Preheated and Blends) in a Direct Injection Compression Ignition Engine.” Applied Thermal Engineering 27: 2314–2323.10.1016/j.applthermaleng.2007.01.009
   Web of Science ®Google Scholar
• Ahmaniemi, S., J. Tuominen, M. Vippola, P. Vuoristo, T. Mäntylä, F. Cernuschi, C. Gualco, A. Bonadei, and R. Di Maggio. 2004. “Characterization of Modified Thick Thermal Barrier Coatings.” Journal of Thermal Spray Technology 13 (3): 361–369.10.1361/10599630420371
   Web of Science ®Google Scholar
• Amann, C. A. 1988. “Promises and Challenges of the Low-Heat-Rejection Diesel.” Journal of Engineering for Gas Turbines and Power 110: 475–481.10.1115/1.3240145
   Web of Science ®Google Scholar
• Atadashi, I. M., M. K. Aroua, and A. Abdul Aziz. 2010. “High Quality Biodiesel and Its Diesel Engine Application: A Review.” Renewable and Sustainable Energy Reviews 14 (7): 1999–2008.10.1016/j.rser.2010.03.020
   Web of Science ®Google Scholar
• Bakar, Rosli Abu, and Semin Abdul Rahim Ismail. 2008. “Fuel Injection Pressure Effect on Performance of Direct Injection Diesel Engines Based on Experiment.” American Journal of Applied Science 5 (3): 197–202.
   Google Scholar
• Banapurmath, N. R., P. G. Tewari, and R. S. Hosmath. 2008a. “Combustion and Emission Characteristics of a Direct Injection, Compression‐Ignition Engine When Operated on Honge Oil, HOME and Blends of HOME and Diesel.” International Journal of Sustainable Engineering 1 (2): 80–93.10.1080/19397030802221265
   Google Scholar
• Banapurmath, N. R., P. G. Tewari, and R. S. Hosmath. 2008b. “Experimental Investigations of a Four-Stroke Single Cylinder Direct Injection Diesel Engine Operated on Dual Fuel Mode with Producer Gas as Inducted Fuel and Honge Oil and Its Methyl Ester (HOME) as Injected Fuels”.” Renewable Energy 33: 2007–2018.10.1016/j.renene.2007.11.017
   Web of Science ®Google Scholar
• Bari, S., C. W. Yu, and T. H. Lim. 2004. “Effect of Fuel Injection Timing with Waste Cooking Oil as a Fuel in a Direct Injection Diesel Engine.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 218: 93–104.10.1243/095440704322829209
   Web of Science ®Google Scholar
• Basha, Syed Ameer, K. Raja Gopal, and S. Jebaraj. 2009. “A Review on Biodiesel Production, Combustion, Emissions and Performance.” Renewable and Sustainable Energy Reviews 13: 1628–1634.
   Web of Science ®Google Scholar
• Ekrem, B., E. Tahsin, and C. Muhammet. 2006. “Effects of Thermal Barrier Coating on Gas Emissions and Performance of a LHR Engine with Different Injection Timings and Valve Adjustments.” Energy Conversion and Management 47: 1298–1310.
   Web of Science ®Google Scholar
• Gajendra Babu, M. K. 2007. “Studies on Performance and Exhaust Emissions of a CI Engine Operating on Diesel and Diesel Biodiesel Blends at Different Injection Pressures and Injection Timings.” Society of Automotive Engineers, Paper No.: 2007-01-0613, 2007.
   Google Scholar
• Hountalas, D. T., D.A. Kouremenos, K. B. Binder, A. Raab, and M. H. Schnabel. 2001. “Using Advanced Injection Timing and EGR to Improve DI Engine Efficiency at Acceptable NO and Soot Levels.” Society of Automotive Engineers, Paper No.: 2001-01-0199.  SAE (Society of Automotive Engineers). 
   Google Scholar
• Jaichandar, S., and P. Tamilporai. 2003. “Low Heat Rejection Engines – An Overview”. Society of Automotive Engineers, Paper No.: 2003-01-0405, SAE (Society of Automotive Engineers), USA.
   Google Scholar
• Karnwal, Ashish, M. M. Naveen Kumar, Rajeev Chaudhary Hasan, Arshad Noor Siddiquee, and Zahid A. Khan. 2010. “Production of Biodiesel from Thumba Oil: Optimization of Process Parameters.” Journal of Energy & Environment. 1 (4): 352–358.
   Google Scholar
• Martin, M. Leenus Jesu, and Edwin Geo. 2011. “Effect of Diesel Addition on the Performance of Cottonseed Oil Fuelled DI Diesel Engine.” International Journal of Energy and Environment 2 (2): 321–330.
   Google Scholar
• Morshed, Mahbub, Kaniz Ferdous, Maksudur R. Khan, M. S. I. Mazumder, M. A. Islam, and Md T. Uddin. 2011. “Rubber Seed Oil as a Potential Source for Biodiesel Production in Bangladesh.” Fuel 90: 2981–2986.10.1016/j.fuel.2011.05.020
   Web of Science ®Google Scholar
• Nabi, Md Nurun, Md. Mustafizur Rahman, and M. Shamim Akhter. 2009. “Biodiesel from Cotton Seed Oil and Its Effect on Engine Performance and Exhaust Emissions.” Applied Thermal Engineering 29: 2265–2270.10.1016/j.applthermaleng.2008.11.009
   Web of Science ®Google Scholar
• Naga, Sarada S., M. Shailaja, A. V. Sita Rama Raju, and K. Kalyani Radha. 2010. “Optimization of Injection Pressure for a Compression Ignition Engine with Cotton Seed Oil as an Alternate Fuel.” International Journal of Engineering, Science and Technology 2 (6): 142–149.
   Google Scholar
• Ong, H. C., T. M. I. Mahlia, H. H. Masjuki, and R. S. Norhasyima. 2011. “Comparison of Palm Oil, Jatropha curcas and Calophyllum inophyllum for Biodiesel: A Review.” Renewable and Sustainable Energy Reviews 15: 3501–3515.10.1016/j.rser.2011.05.005
   Web of Science ®Google Scholar
• Puhan, Sukumar, R. Jegan, K. Balasubbramanian, and G Nagarajan. 2009. “Effect of Injection Pressure on Performance, Emission and Combustion Characteristics of High Linolenic Linseed Oil Methyl Ester in a DI Diesel Engine.” Renewable Energy 34: 1227–1233.10.1016/j.renene.2008.10.001
   Web of Science ®Google Scholar
• Rakopoulos, C. D., D. C. Rakopoulos, E. G. Giakoumis, and A. M. Dimaratos. 2010. “Investigation of the Combustion of Neat Cottonseed Oil or Its Neat Bio-Diesel in a HSDI Diesel Engine by Experimental Heat Release and Statistical Analyses.” Fuel 89 (12): 3814–3826.10.1016/j.fuel.2010.07.012
   Web of Science ®Google Scholar
• Ramadhas, A. S., S. Jayaraj, and C. Muraleedharan. 2005. “Characterization and Effect of Using Rubber Seed Oil as Fuel in the Compression Ignition Engines.” Renewable Energy 30: 795–803.10.1016/j.renene.2004.07.002
   Web of Science ®Google Scholar
• Roy, M. M. 2009. “Effect of Fuel Injection Timing and Injection Pressure on Combustion and Odorous Emissions in DI Diesel Engine.” Journal of Energy Resources Technology, ASME Transactions 131: 1–8.
   Web of Science ®Google Scholar
• Sahoo, P. K., L. M. Das, M. K. J. Babu, and S. N. Naik. 2007. “Biodiesel Development from High Acid Value Polanga SeedOil and Performance Evaluation in a CI Engine.” Fuel 86: 448–454.
   Web of Science ®Google Scholar
• Suresh, G., H. C. Kamath, and N. R. Banapurmath. 2014. “Effect of injection timing, injector opening pressure and nozzle geometry on the performance of cotton seed oil methyl ester fuelled diesel engine. International Journal of Sustainable Engineering.” Taylor and Francis Publications 7 (1): 82–92.10.1016/j.fuel.2006.07.025
   Web of Science ®Google Scholar
• Tao F., Y. Liu, B. H. Rempel Ewert, D. E. Foster, R. D. Reitz, D. Choi, and P. C. Miles. 2005. “Modelling the Effect of EGR and Retarded Injection on Soot Formation in a High Speed Diesel Injection (HSDI) Diesel Engine Using a Multi Step Phenomenological Soot Model.” Society of Automotive Engineers, Paper No.: 2005 -01-0121.  Society of Automotive Engineers (SAE).
   Google Scholar
• Yang, Ru, Mengxing Su, Jianchun Zhang, Fuqiang Jin, Chunhong Zha, Min Li, and Xinmin Hao. 2011. “Biodiesel Production from Rubber Seed Oil Using Poly (Sodium Acrylate) Supporting NaOH as a Water-Resistant Catalyst.” Bioresource Technology 102: 2665–2671.10.1016/j.biortech.2010.10.131
   PubMed Web of Science ®Google Scholar