Eco-design improvement for the diaphragm forming process

References

• Abele, E., R. Anderl, and H. Birkhofer. 2005. Environmentally-friendly Product Development: Method and Tools. London: Springer.10.1007/b138604
   Google Scholar
• Akao, Y. 1990. Quality Function Deployment: Integrating Customer Requirements into Product Design. New York: Productivity Press.
   Google Scholar
• Ashby, M. F. 2013. Materials and the Environment. Oxford: Elsevier.
   Google Scholar
• Bersee, H., S. Lindstedt, G. Niño, and A. Beukers. 2007. “Diaphragm Forming of Thermoset Composites.” Paper Presented at the 16th International Conference on Composite Materials, Kyoto International Conference Center, Kyoto.
   Google Scholar
• Cristofari, M., A. Deshmukh, and B. Wang. 1996. “Green Quality Function Deployment.” Proceedings of the 4th International Conference on Environmentally Conscious Design and Manufacturing, July 23–25, Cleveland, Ohio, pp. 297–304.
   Google Scholar
• Devanathan, S., D. Ramanujan, W. Z. Bernstein, F. Zhao, and K. Ramani. 2010. “Integration of Sustainability into Early Design through the Function Impact Matrix.” Journal of Mechanical Design 132 (8): 081004–081001.10.1115/1.4001890
   Web of Science ®Google Scholar
• Dieter, G., and L. Schmidt. 2009. Engineering Design. 4th ed. New York: McGraw Hill.
   Google Scholar
• Dong, C., C. Zhang, and B. Wang. 2003. “Integration of Green Quality Function Deployment and Fuzzy Multi-attribute Utility Theory-based Cost Estimation for Environmentally Conscious Product Development.” International Journal of Environmentally Conscious Design & Manufacturing 11 (1): 12–28.
   Google Scholar
• Duflou, J. R., J. W. Sutherland, D. Dornfeld, C. Herrmann, J. Jeswiet, S. Kara, M. Hauschild, and K. Kellens. 2012. “Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach.” CIRP Annals-Manufacturing Technology 61 (2): 587–609.10.1016/j.cirp.2012.05.002
   Web of Science ®Google Scholar
• Fiksel, J. 2009. Design for Environment: A Guide to Sustainable Product Development. New York: McGraw Hill.
   Google Scholar
• Gibovic, D., and J. de Ciurana. 2008. Introduction and Applications of DIN 8580. University of Girona, 978–984.
   Google Scholar
• Gutowski, T., J. Dahmus, and A. Thiriez. 2006. “Electrical Energy Requirements for Manufacturing Processes.” Paper Presented at the 13th CIRP International Conference on Life Cycle Engineering, Leuven, Belgium, 623–627.
   Google Scholar
• Haapala, K. R., A. V. Catalina, M. L. Johnson, and J. W. Sutherland. 2012. “Development and Application of Models for Steelmaking and Casting Environmental Performance.” Journal of Manufacturing Science and Engineering 134 (5): 051013-1–051013-13.10.1115/1.4007463
   Google Scholar
• Haapala, K. R., F. Zhao, J. Camelio, J. W. Sutherland, S. J. Skerlos, D. A. Dornfeld, I. Jawahir, A. F. Clarens, and J. L. Rickli. 2013. “A Review of Engineering Research in Sustainable Manufacturing.” Journal of Manufacturing Science and Engineering 135 (4): 041013-1–041013-16.10.1115/1.4024040
   Google Scholar
• Hamraz, B., N. H. Caldwell, and P. J. Clarkson. 2013. “A Matrix-calculation-based Algorithm for Numerical Change Propagation Analysis.” IEEE Transactions on Engineering Management 60 (1): 186–198.10.1109/TEM.2012.2203307
   Web of Science ®Google Scholar
• Ingarao, G., R. Di Lorenzo, and F. Micari. 2011. “Sustainability Issues in Sheet Metal Forming Processes: An Overview.” Journal of Cleaner Production 19 (4): 337–347.10.1016/j.jclepro.2010.10.005
   Web of Science ®Google Scholar
• Jacobus, O. D., V. J. Henning, and C. I. Keith, and P. P. Christiaan. 2001. “Modelling of the Off-gas Exit Temperature and Slag Foam Depth of an Electric Arc Furnace.” ISIJ International 41 (4): 399–401.
   Web of Science ®Google Scholar
• Jiang, Z., Z. Fan, J. W. Sutherland, H. Zhang, and X. Zhang. 2014. “Development of an Optimal Method for Remanufacturing Process Plan Selection.” The International Journal of Advanced Manufacturing Technology 72 (9–12): 1551–1558.10.1007/s00170-014-5783-x
   Web of Science ®Google Scholar
• Kaebernick, H., S. Kara, and M. Sun. 2003. “Sustainable Product Development and Manufacturing by Considering Environmental Requirements.” Robotics and Computer-Integrated Manufacturing 19 (6): 461–468.10.1016/S0736-5845(03)00056-5
   Web of Science ®Google Scholar
• Kellens, K., W. Dewulf, M. Overcash, M. Z. Hauschild, and J. R. Duflou. 2012. “Methodology for Systematic Analysis and Improvement of Manufacturing Unit Process Life Cycle Inventory (UPLCI) CO2PE! Initiative (Cooperative Effort on Process Emissions in Manufacturing). Part 2: Case Studies.” The International Journal of Life Cycle Assessment 17 (2): 242–251.10.1007/s11367-011-0352-0
   Web of Science ®Google Scholar
• Kim, D. B., S. J. Shin, G. Shao, and A. Brodsky. 2014. “A Decision-guidance Framework for Sustainability Performance Analysis of Manufacturing Processes.” The International Journal of Advanced Manufacturing Technology 78 (9–12): 1455–1471.
   Web of Science ®Google Scholar
• Lo, C. H., K. C. Tseng, and C. H. Chu. 2010. “One-step QFD Based 3D Morphological Charts for Concept Generation of Product Variant Design.” Expert Systems with Applications 37 (11): 7351–7363.10.1016/j.eswa.2010.04.028
   Web of Science ®Google Scholar
• Long, A. C. 2007. Composites Forming Technologies. Cambridge: Woodhead Publishing.
   Google Scholar
• Masui, K., T. Sakao, M. Kobayashi, and A. Inaba. 2003. “Applying Quality Function Deployment to Environmentally Conscious Design.” International Journal of Quality & Reliability Management 20 (1): 90–106.
   Google Scholar
• McCarty, T., M. Jordan, and D. Probst. 2011. Six Sigma for Sustainability. New York: McGraw Hill.
   Google Scholar
• Otto, K., and K. Wood. 2001. Product Design. New Jersey, NJ: Prentice Hall.
   Google Scholar
• Overcash, M., J. Twomey, and J. Isaacs. 2009. “Manufacturing Unit Process Life Cycle Inventories (Uplci).” Proceedings of the 9th Workshop on Performance Metrics for Intelligent Systems, Gaithersburg.
   Google Scholar
• Pahl, G., and W. Beitz. 2007. Engineering Design: A Systematic Approach. 3rd ed. London: Springer.10.1007/978-1-84628-319-2
   Google Scholar
• Paralikas, J., K. Salonitis, and G. Chryssolouris. 2013. “Energy Efficiency of Cold Roll Forming Process.” The International Journal of Advanced Manufacturing Technology 66 (9–12): 1271–1284.10.1007/s00170-012-4405-8
   Web of Science ®Google Scholar
• Rathod, G., S. Vinodh, and U. Madhyasta. 2011. “Integration of ECQFD and LCA for Enabling Sustainable Product Design in an Electric Vehicle Manufacturing Organisation.” International Journal of Sustainable Engineering 4 (3): 202–214.10.1080/19397038.2010.547624
   Google Scholar
• Russo, D., C. Rizzi, and G. Montelisciani. 2014. “Inventive Guidelines for a TRIZ-based Eco-design Matrix.” Journal of Cleaner Production 76: 95–105.10.1016/j.jclepro.2014.04.057
   Web of Science ®Google Scholar
• Sakao, T. 2007. “A QFD-centred Design Methodology for Environmentally Conscious Product Design.” International Journal of Production Research 45 (18–19): 4143–4162.10.1080/00207540701450179
   Web of Science ®Google Scholar
• Smiley, A., and R. Pipes. 1988. “Analysis of the Diaphragm Forming of Continuous Fiber Reinforced Thermoplastics.” Journal of Thermoplastic Composite Materials 1 (4): 298–321.10.1177/089270578800100401
   Google Scholar
• Tucker, C. 1997. Forming of Advanced Composites, 297–372. New York: Wiley.
   Google Scholar
• Ulrich, K. T., and S. D. Eppinger. 2012. Product Design and Development. 5th ed. New York: McGraw-Hill.
   Google Scholar
• Vinodh, S., and G. Rathod. 2010. “Application of QFD for Enabling Environmentally Conscious Design in an Indian Rotary Switch Manufacturing Organisation.” International Journal of Sustainable Engineering 3 (2): 95–105.10.1080/19397030903494837
   Google Scholar
• Yüksel, H. 2010. “Design of Automobile Engines for Remanufacture with Quality Function Deployment.” International Journal of Sustainable Engineering 3 (3): 170–180.10.1080/19397038.2010.486046
   Google Scholar
• Zhang, Y. 1999. “Green QFD-II: A Life Cycle Approach for Environmentally Conscious Manufacturing by Integrating LCA and LCC into QFD Matrices.” International Journal of Production Research 37 (5): 1075–1091.10.1080/002075499191418
   Web of Science ®Google Scholar