Proposing of new building scheme and composite towards global warming mitigation for Malaysia

References

• Abdul Quader, M., A. Shamsuddin, R. G. Ariffin, A. Shameem, and D. Mahidzal. 2015. “A Comprehensive Review on Energy Efficient CO2 Breakthrough Technologies for Sustainable Green Iron And Steel Manufacturing.” Renewable and Sustainable Energy 50 (10): 594–614. doi:10.1016/j.rser.2015.05.026.
   Web of Science ®Google Scholar
• Adalberth, K. 1997b. “Energy Use during the Life Cycle of Single-unit Dwellings: Examples.” Building and Environment 32 (4): 321–329. doi:10.1016/S0360-1323(96)00069-8.
   Web of Science ®Google Scholar
• Adalberth, K. 1997. “Energy Use during the Life Cycle of Buildings: A Method.” Journal of Building and Environment 32 (4): 317–320. doi:10.1016/S0360-1323(96)00068-6.
   Web of Science ®Google Scholar
• Anink, D., C. Boonstra, and J. Mak. 1996. Handbook of Sustainable Building. London: James & James Science Publishers.
   Google Scholar
• Burck, J., B. Christoph, and K. Bohnenberge. 2015. The Climate Change Performance Index Results. http://www.germanwatch.org.
   Google Scholar
• Burden, E. 2004. Illustrated Dictionary of Architectural Preservation: Restoration, Renovation, Rehabilitation and Reuse. New York: McGraw Hill.
   Google Scholar
• Che-Ani, A. I., A. Zaharim, M. F. M. Zain, N. Mohd-Tawil, and M. Surat. 2009. “Timber Defects in Building: A Study of Telapak Naning, Malacca, Malaysia.” WSEAS Transactions on Environment and Development Malaysia 5 (1): 109–118.
   Google Scholar
• Chen, T. Y., J. Burnett, and C. K. Chau. 2001. “Analysis of Embodied Energy Use in the Residential Building of Hong Kong.” Energy 26 (4): 323–340. doi:10.1016/S0360-5442(01)00006-8.
   Web of Science ®Google Scholar
• CIDB. 2009. Industrialised Building System (IBS): Implementation Strategy from R&D Perspective, Kuala Lumpur.
   Google Scholar
• Citherlet, S., and T. Defaux. 2007. “Energy and Environmental Comparison of Three Variants of a Family House during Its Whole Life Span.” Building and Environment 42 (2): 591–598. doi:10.1016/j.buildenv.2005.09.025.
   Web of Science ®Google Scholar
• Derinaldis, P. P., and G. Tampone. 2007. “The Failure of the Timber Structures Caused by Incorrect Design-execution of the Joints.” International Symposium Mechanical Behaviour and Failures of the Timber Structures, Florence, Venice and Vicenza Italy.
   Google Scholar
• Ding, G. 2007. “Life Cycle Energy Assessment of Australian Secondary Schools.” Building Research & Information 35 (5): 487–500. doi:10.1080/09613210601116408.
   Web of Science ®Google Scholar
• Dryzek, J. S., R. B. Norgaard, and B. Schlosberg. 2011. “The Oxford Handbook of Climate Change and Society, Oxford Handbooks” Politics & International Relations. Oxford University Press. https://www.amazon.com/Oxford-Handbook-Climate-Society-Handbooks/dp/0199566607
   Google Scholar
• Frenette, C. D., C. Bulle, R. Beauregard, A. Salenikovich, and D. Derome. 2010. “Using Life Cycle Assessment to Derive an Environmental Index for Light-frame Wood Wall Assemblies.” Building and Environment 45 (10): 2111–2122. doi:10.1016/j.buildenv.2010.03.009.
   Web of Science ®Google Scholar
• Gustavsson, L., and R. Sathre. 2006. “Variability in Energy and Carbon Dioxide Balances of Wood and Concrete Building Materials.” Building and Environment 41 (7): 940–951. doi:10.1016/j.buildenv.2005.04.008.
   Web of Science ®Google Scholar
• Gutkowski, R. M., N. Miller, M. Fragiacomo, and J. Balogh. 2011. “Composite Wood-concrete Beams Using Utility Poles: Time-dependent Behavior.” Journal of Structural Engineering 137 (6): 625–634. doi:10.1061/(ASCE)ST.1943-541X.0000293.
   Web of Science ®Google Scholar
• Huberman, N., and D. Pearlmutter. 2008. “A Life-cycle Energy Analysis of Building Materials in the Negev Desert.” Energy and Buildings 40 (5): 837–848. doi:10.1016/j.enbuild.2007.06.002.
   Web of Science ®Google Scholar
• ISO-14040, ISO 14040. 2006. Environmental Management – Life Cycle Assessment – Principles and Framework. [CHD 34 : Environmental Management].
   Google Scholar
• Johar, S., A. I. Che-Ani, N. M. Tawil, M. Surat, and S. N. Kamaruzzaman. 2013. “Preliminary Survey and Defects Analysis of Traditional Timber Mosques in Malaysia.” WSEAS Transactions on Environment and Development 9 (1): 13–23.
   Google Scholar
• José, L. M., and A. D. Antonio. 2015. “Structural Efficiency of Full-scale Timber–Concrete Composite Beams Strengthened with Fiberglass Reinforced Polymer.” Composite Structures 128: 145–154. doi:10.1016/j.compstruct.2015.03.054.
   Web of Science ®Google Scholar
• Kadir, B. M., and A. B. Tighnavard. 2015. “Combinations of Building Construction Material for Residential Building for the Global Warming Mitigation for Malaysia.” Construction and Building Materials 85: 100–108. doi:10.1016/j.conbuildmat.2015.03.083.
   Web of Science ®Google Scholar
• Kavi, H., A. K. Toksoy, and M. Guden. 2006. “Predicting Energy Absorption in a Foam-filled Thin-walled Aluminum Tube Based on Experimentally Determined Strengthening Coefficient.” Materials and Design 27 (4): 263–269. doi:10.1016/j.matdes.2004.10.024.
   Web of Science ®Google Scholar
• Keeling, C. D., and T. P. Whorf. 2004. “Atmospheric CO2 from Continuous Air Samples at Mauna Loa Observatory, Hawaii, U.S.A.” In Carbon Dioxide Information Analysis Center, Oak Ridge National Laboratory.
   Google Scholar
• Kellenberger, D., and H. J. Althaus. 2009. “Relevance of Simplifications in LCA of Building Components.” Building and Environment 44 (4): 818–825. doi:10.1016/j.buildenv.2008.06.002.
   Web of Science ®Google Scholar
• Koch, P. 1992. “Wood versus Nonwood Materials in U.S. Residential Construction: Some Energy-related Global Implications.” Forest Products Journal 42 (5): 31–42.
   Web of Science ®Google Scholar
• Kuenniger, T., and K. Richter. 1995. “Life Cycle Analysis of Utility Poles: A Swiss Case Study.” In: Proceedings of the 3rd International Wood Preservation Symposium, Cannes-Mandelieu, France, February 6–7.
   Google Scholar
• Mithraratne, N., and B. Vale. 2004. “Life Cycle Analysis Model for New Zealand Houses.” Building and Environment 39 (4): 483–492. doi:10.1016/j.buildenv.2003.09.008.
   Web of Science ®Google Scholar
• Moeck, M., and J. Y. Yoon. 2004. “Green Buildings and Potential Electric Light Energy Savings.” Journal of Architectural Engineering 10 (4): 143–159. doi:10.1061/(ASCE)1076-0431(2004)10:4(143).
   Google Scholar
• Monteiro, H., and F. Freire. 2012. “Life-cycle Assessment of a House with Alternative Exterior Walls: Comparison of Three Impact Assessment Methods.” Energy and Buildings 47: 572–583. doi:10.1016/j.enbuild.2011.12.032.10.1016/j.enbuild.2011.12.032
   Web of Science ®Google Scholar
• Nabilah, A. B., and T. Balendra. 2012. “Seismic Hazard Analysis for Kuala Lumpur, Malaysia.” Journal of Earthquake Engineering 16 (7): 1076–1094. doi:10.1080/13632469.2012.685208.
   Web of Science ®Google Scholar
• Petersen, A. K., and B. Solberg. 2002. “Greenhouse Gas Emissions, Life-cycle Inventory and Cost-efficiency of Using Laminated Wood Instead of Steel Construction. Case: Beams at Gardermoen Airport.” Journal of Environmental Science & Policy 5 (2): 169–182. doi:10.1016/S1462-9011(01)00044-2.
   Google Scholar
• Peuportier, B. 2011. “Life Cycle Assessment Applied to the Comparative Evaluation of Single Family Houses in the French Context.” Journal of Energy Building 33 (5): 443–450. doi:10.1016/S0378-7788(00)00101-8.
   Web of Science ®Google Scholar
• Roodman, D. M., and N. Lenssen. 1995. “A Building Revolution: How Ecology and Health Concerns are Transforming Construction.” Worldwatch 124, Washington, DC.
   Google Scholar
• Scharai-Rad, M., and J. Welling. 2002. Environmental and Energy Balances of Wood Products and Substitutes. Rome: Food and Agriculture Organization of the United Nations (FAO).
   Google Scholar
• Tighnavard, A. B., and B. M. Kadir. 2013. “Life Cycle Assessment of IBS in Malaysia and Comparing Human Health on Timber and Concrete Pre-cast.” Research Journal of Applied Sciences, Engineering and Technology 6 (24): 4697–4702.
   Google Scholar
• Ulrike, D., L. Jianchun, R. Rajendra, and C. Keith. 2016. “A Dynamic-based Method for the Assessment of Connection Systems of Timber Composite Structures.” Construction and Building Materials 102 (2): 999–1008. doi:10.1016/j.conbuildmat.2015.10.009.
   Web of Science ®Google Scholar
• Varma, A. H., J. M. Ricles, R. Sause, and L. W. Lu. 2002. “Experimental Behavior of High Strength Square Concrete-filled Steel Tube Beam-columns.” Journal of Structural Engineering 128 (3): 309–318. doi:10.1061/(ASCE)0733-9445(2003)129:9(1286).
   Web of Science ®Google Scholar
• Wang, W., R. Zmeureanua, and H. Rivard. 2005. “Applying Multi-objective Genetic Algorithms in Green Building Design Optimization.” Building and Environment 40 (11): 1512–1525. doi:10.1016/j.buildenv.2004.11.017.
   Web of Science ®Google Scholar
• Yoke, L.L., S. Hassim, and M. R. A. Kadir. 2003. “Computer-based Cost Control Model for Industrialised Building System Construction.” International Conference of Industrialised Building Systems, Kuala Lumpur, Malaysia, July 20–21.
   Google Scholar