Modular architecture principles – MAPs: a key factor in the development of sustainable open architecture products

References

• Ameli, M., S. Mansour, and A. Ahmadi-Javid. 2016. “A Multi-Objective Model for Selecting Design Alternatives and End-Of-Life Options under Uncertainty: A Sustainable Approach.” Resources, Conservation and Recycling 109: 123–136. doi:10.1016/j.resconrec.2016.01.011.
   Web of Science ®Google Scholar
• Bhamu, J., and K. Sangwan. 2014. “Lean Manufacturing: Literature Review and Research Issues.” International Journal of Operations & Production Management 34 (7): 876–940. doi:10.1108/IJOPM-08-2012-0315.
   Web of Science ®Google Scholar
• Byggeth, S., G. Broman, and K.-H. Robert. 2007. “A Method for Sustainable Product Development Based on A Modular System of Guiding Questions.” Journal of Cleaner Production 15: 1–11. doi:10.1016/j.jclepro.2006.02.007.
   Web of Science ®Google Scholar
• Chang, T.-R., C.-S. Wang, and -C.-C. Wang. 2013. “A Systematic Approach for Green Design in Modular Product Development.” International Journal of Advanced Manufacturing Technology 68: 2729–2741. doi:10.1007/s00170-013-4865-5.
   Web of Science ®Google Scholar
• Chung-Shing, W. 2009. “Web-Based Modular Interface Geometries with Constraints in Assembly Models.” Computers & Industrial Engineering 56 (4): 1675–1686. doi:10.1016/j.cie.2008.10.018.
   Web of Science ®Google Scholar
• Cor, E., and P. Zwolinski. 2014. “A Procedure to Define the Best Design Intervention Strategy on A Product for A Sustainable Behavior of the User.” Procedia CIRP 15: 425–430. doi:10.1016/j.procir.2014.06.075.
   Google Scholar
• Dahmus, J., J. Gonzalez-Zugasti, and K. Otto. 2001. “Modular Product Architecture.” Design Studies 22 (1): 409–424. doi:10.1016/S0142-694X(01)00004-7.
   Google Scholar
• Devanathan, S., D. Ramanujan, W. Z. Bernstein, F. Zhao, and K. Ramani. 2010. “Integration of Sustainability into Early Design through the Function Impact Matrix.” Journal of Mechanial Design 132: 081004. doi:10.1115/1.4001890.
   Web of Science ®Google Scholar
• Eddy, D., S. Krishnamurty, I. Grosse, J. Wileden, and K. Lewis. 2015. “A Predictive Modelling-Based Material Selection Method for Sustainable Product Design.” Jorunal of Engineering Design 26 (10–12): 365–390. doi:10.1080/09544828.2015.1070258.
   Web of Science ®Google Scholar
• Erixon, G., A. von Yxkull, and A. Arnström. 1996. “Modularity - the Basis for Product and Factory Reengineering.” CIRP Annals 45: 1–6. doi:10.1016/S0007-8506(07)63005-4.
   Google Scholar
• Fiorineschi, L., F. Fricilli, P. Rissone, and G. Cascini. 2015. “Product Architecture Definition: Evaluating the Potentiality of TRIZ Tools.” Procedia Engineering 131: 359–371. doi:10.1016/j.proeng.2015.12.415.
   Google Scholar
• Fujita, K. 2002. “Product Variety Optimization under Modular Architecture.” Computer-Aided Design 34 (12): 953–965. doi:10.1016/S0010-4485(01)00149-X.
   Web of Science ®Google Scholar
• Gifford, R., and A. Nilsson. 2014. “Personal and Social Factors that Influence Pro-Environmental Concern and Behaviour: A Review.” International Journal of Psychology 49 (3): 141–157. doi:10.1002/ijop.12034.
   PubMed Web of Science ®Google Scholar
• Giudice, F., F. Balisteri, and G. Risitano. 2009. “A Concurrent Design Method Based on DFMA-FEA Integrated Approach.” Concurrent Engineering 17 (3): 183–202. doi:10.1177/1063293X09343337.
   Web of Science ®Google Scholar
• Gu, P., M. Hashemian, and A. Nee. 2004. “Adaptable Design.” CIRP Annals 53 (2): 539–557. doi:10.1016/S0007-8506(07)60028-6.
   Web of Science ®Google Scholar
• He, B., W. Tang, J. Wang, S. Huang, Z. Deng, and Y. Wang. 2015. “Low-Carbon Conceptual Design Based on Product Lifecycle Assessment.” International Journal of Advanced Manufacturing Technology 81: 863–874. doi:10.1007/s00170-015-7253-5.
   Web of Science ®Google Scholar
• Hu, S., J. Ko, L. Weyland, H. ElMaraghy, T. Lien, Y. Koren, … M. Shpitalni. 2011. “Assembly System Design and Operations for Product Variety.” CIRP Annals-Manufacturing Technology 60 (2): 715–733. doi:10.1016/j.cirp.2011.05.004.
   Web of Science ®Google Scholar
• Jian, P., J. Leng, K. Ding, P. Gu, and Y. Koren. 2016. “Social Manufacturing as a Sustainable Paradigm for Mass Individualization.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. doi:10.1177/0954405416666903.
   Web of Science ®Google Scholar
• Kimura, F., S. Kato, T. Hata, and T. Masuda. 2001. “Product Modularization for Parts Reuse in Inverse Manufacturing.” CIRP Annals - Manufacturing Technology 50 (1): 89–92. doi:10.1016/S0007-8506(07)62078-2.
   Web of Science ®Google Scholar
• Kissling, R., C. Fitzpatrick, H. Boeni, C. Luepschen, S. Andrew, and J. Dickenson. 2012. “Definition of Generic Re-Use Operating Models for Electrical and Electronic Equipment.” Resources, Conservation and Recycling 65: 85–99. doi:10.1016/j.resconrec.2012.04.003.
   Web of Science ®Google Scholar
• Koga, T., and K. Aoyama (2008). “Modular Design Method for Sustainable Life-Cycle of Product Family considering Future Market Changes.” Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. Brooklyn, New York.
   Google Scholar
• Kollmuss, A., and J. Agyeman. 2010. “Mind the Gap: Why Do People Act Environmentally and What are the Barriers to Pro-Environmental Behavior?” Environmental Education Research 8 (3): 239–260. doi:10.1080/13504620220145401.
   Google Scholar
• Koren, Y., S. Hu, P. Gu, and M. Shpitalni. 2013. “Open-Architecture Products.” CIRP Annals - Manufacturing Technology 62: 719–729. doi:10.1016/j.cirp.2013.06.001.
   Web of Science ®Google Scholar
• Koren, Y., M. Shpitalni, P. Gu, and S. Hu. 2015. “Product Design for Mass-Individualization.” Procedia CIRP - 25th Design Conference Innovative Product Creation 36: 64–71.
   Google Scholar
• Kovács, G. 2008. “Corporate Environmental Responsibility in the Supply Chain.” Journal of Cleaner Production 16 (15): 1571–1578. doi:10.1016/j.jclepro.2008.04.013.
   Web of Science ®Google Scholar
• Kriwet, A., E. Zussman, and G. Seliger. 1995. “Systematic Integration of Design-For-Recycling into Product Design.” International Journal of Production Economics 38 (1): 15–22. doi:10.1016/0925-5273(95)99062-A.
   Web of Science ®Google Scholar
• Kyoung-Yun, K., D. Manley, and H. Yang. 2006. “Ontology-Based Assembly Design and Information Sharing for Collaborative Product Development.” Computer-Aided Design 38 (12): 1233–1250. doi:10.1016/j.cad.2006.08.004.
   Web of Science ®Google Scholar
• Lu, B., B. Li, L. Wang, J. Yang, J. Liu, and X. Wang. 2014. “Reusability Based on Life Cycle Sustainability Assessment: Case Study on WEEE.” Procedia CIRP 15: 473–478. doi:10.1016/j.procir.2014.06.046.
   Google Scholar
• Ma, J., and G. Kremer. 2016. “A Sustainable Modular Product Design Approach with Key Components and Uncertain End-Of-Life Strategy Consideration.” The International Journal of Advanced Manufacturing Technology 85 (1): 741–763. doi:10.1007/s00170-015-7979-0.
   Web of Science ®Google Scholar
• Mesa, J., H. Maury, R. Arrieta, A. Bula, and C. Riba. 2015. “Characterization of Modular Architecture Principles Towards Reconfiguration: A Firts Approach in Its Selection Process.” International Journal of Advanced Manufacturing Technology 80 (1): 221–232. doi:10.1007/s00170-015-6951-3.
   Web of Science ®Google Scholar
• Mutha, A., and S. Pokharel. 2009. “Strategic Network Design for Reverse Logistics and Remanufacturing Using New and Old Product Modules.” Computers & Industrial Engineering 56 (1): 334–346. doi:10.1016/j.cie.2008.06.006.
   Web of Science ®Google Scholar
• Orlitzky, M., D. Siegel, and D. Waldman. 2011. “Strategic Corporate Social Responsibility and Environmental Sus.” Business & Society 50 (1): 6–27. doi:10.1177/0007650310394323.
   Web of Science ®Google Scholar
• Ramani, K., D. Ramanujan, W. Z. Bernstein, F. Zhao, J. Sutherland, C. Handwerker, … D. Thurson. 2010. “Integrated Sustainable Lifecycle Design: A Review.” Journal of Mechanical Design 136: 091004–1 091004–15. doi:10.1115/1.4002308.
   Google Scholar
• Remery, M., C. Mascle, and B. Agard. 2012. “A New Method for Evaluating the Best Product End-Of-Life Strategy during the Early Design Phase.” Journal of Engineering Design 23 (6): 419–441. doi:10.1080/09544828.2011.605061.
   Web of Science ®Google Scholar
• Rizzi, F., I. Bartolozzi, A. Borghini, and M. Frey. 2012. “Environmental Management of End-Of-Life Products: Nine Factors of Sustainability in Collaborative Networks.” Business Strategy and the Environment 22 (8): 561–572. doi:10.1002/bse.1766.
   Web of Science ®Google Scholar
• Romli, A., P. Prickett, R. Setchi, and S. Soe. 2015. “Integrated Eco-Design Decision-Making for Sustainable Product Development.” International Journal of Production Research 53 (2): 549–571. doi:10.1080/00207543.2014.958593.
   Web of Science ®Google Scholar
• Rusinko, C. 2007. “Green Manufacturing: An Evaluation of Environmentally Sustainable Manufacturing Practices and Their Impact on Competitive Outcomes.” IEEE Transactions on Engineering Management 54 (3): 445–454. doi:10.1109/TEM.2007.900806.
   Web of Science ®Google Scholar
• Seliger G., Weinert N., Zettl M.. (2007). Module Configurator for the Development of Products for Ease of Remanufacturing. In: Takata S., Umeda Y. (eds) Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses. London: Springer
   Google Scholar
• Shrivastava, P., and S. Berger. 2010. “Sustainability Principles: A Review and Directions.” Organization Management Journal 7 (4): 246–261. doi:10.1057/omj.2010.35.
   Google Scholar
• Simpson, T. 2004. “Product Platform Design and Customization: Status and Promise.” Artificial Inteligence for Engineering Design, Analysis and Manufacturing 18: 3–20.
   Web of Science ®Google Scholar
• Smith, S., and -C.-C. Yen. 2010. “Green Product Design through Product Modularization Using Atomic Theory.” Robotics and Computer-Integrated Manufacturing 26 (6): 790–798. doi:10.1016/j.rcim.2010.05.006.
   Web of Science ®Google Scholar
• Stevels, A. 1997. Optimization of the End-Of-Life System. Ecodesign: A promising Approach. UNEP Working Group on sustainable Product Development.
   Google Scholar
• Subramaniyam, P., K. Srinivassan, and M. Prabaharan. 2011. “Approach for Green Product Design.” International Journal of Innovation, Management and Technology 2 (3): 244–248.
   Google Scholar
• Tian, J., and M. Chen. 2014. “Sustainable Design for Automotive Products: Dismantling and Recycling of End-Of-Life Vehicles.” Waste Management 34: 458–467. doi:10.1016/j.wasman.2013.11.005.
   PubMed Web of Science ®Google Scholar
• Tseng, K., B. Lin, and C.-M. Han. 2012. “An Intelligent System for Sustainable Product Design at the Concept Development Stage.” Computer-Aided Design and Applications 9 (3): 397–408. doi:10.3722/cadaps.2012.397-408.
   Google Scholar
• Umeda, Y., S. Fukushige, K. Tonoike, and S. Kondoh. 2008. “Product Modularity for Life Cycle Design.” CIRP Annals - Manufacturing Technology 57 (1): 13–16. doi:10.1016/j.cirp.2008.03.115.
   Web of Science ®Google Scholar
• UPSTART. (2016, 05). “News from the Entrepreneurship Community in Singapore.” START-UPS:Singaporean engineer builds the world’s first multi-configuration bicycle with help from ACE Start-up Grant(3). Retrieved 10 May 2017. http://www.upstartnews.sg/archive/03/05.html
   Google Scholar
• Vinodh, S., and G. Rathod. 2010. “Integration of ECQFD and LCA for Sustainable Product Design.” Journal of Cleaner Production 18: 833–842. doi:10.1016/j.jclepro.2009.12.024.
   Web of Science ®Google Scholar
• Yan, J., and C. Feng. 2014. “Sustainable Design-Oriented Product Modularity Combined with 6R Concept: A Case Study of Rotor Laboratory Bench.” Clean Technologies and Environmental Policiy 16: 95–109. doi:10.1007/s10098-013-0597-3.
   Web of Science ®Google Scholar
• Yung, W., H. Chan, D. Wong, J. So, and A. Choi. 2012. “Eco-Redesign of a Personal Electronic Product Subject to the Energy-Using Product Directive.” International Journal of Production Research 50 (5): 1411–1423. doi:10.1080/00207543.2011.571941.
   Web of Science ®Google Scholar