Effect of electromagnetic energy harvesting technology on safety and low power generation in sustainable transportation: a feasibility study

References

• Aswathaman, V., and M. Priyadharshini. 2011. “Every Speed Breaker Is Now a Source of Power.” Paper presented at the Proc. of 2010 International Conference on Biology, Environment and Chemistry IPCBEE.Singapore, Singapore.
   Google Scholar
• Bhagdikar, P., S. Gupta, N. Rana, and R. Jegadeeshwaran. 2014. “Generation of Electricity with the Use of Speed breakers.” International Journal of Advances in Engineering & Technology 7 (2): 589.
   Google Scholar
• Billah, K., and A. Sabbir. 2018. “Pedestrian Crash Analysis for San Antonio.” University of Texas at San Antonio.
   Google Scholar
• Chen, M., W. Shaopeng, H. Wang, and J. Zhang. 2011. “Study of Ice and Snow Melting Process on Conductive Asphalt Solar collector.” Solar Energy Materials and Solar Cells 95 (12): 3241–3250. doi:10.1016/j.solmat.2011.07.013.
   Web of Science ®Google Scholar
• Chiarelli, A., A. Al-Mohammedawi, A. R. Dawson, and A. Garcia. 2017. “Construction and Configuration of Convection-powered Asphalt Solar Collectors for the Reduction of Urban Temperatures.” International Journal of Thermal Sciences 112: 242–251. doi:10.1016/j.ijthermalsci.2016.10.012.
   Web of Science ®Google Scholar
• Datta, U. 2016. “Harvesting of Thermoelectric Energy from Asphalt pavements.” University of Texas at San Antonio.
   Google Scholar
• Datta, U., S. Dessouky, and A. T. Papagiannakis. 2017. “Harvesting Thermoelectric Energy from Asphalt pavements.” Transportation Research Record: Journal of the Transportation Research Board, no. 2628: 12–22. doi:10.3141/2628-02.
   Web of Science ®Google Scholar
• Dawson, A., R. Mallick, A. G. Hernandez, and P. K. Dehdezi. 2014. “Energy Harvesting from Pavements.” In Climate Change, Energy, Sustainability and Pavements, 481–517. Berlin, Heidelberg: Springer.
   Google Scholar
• Ding, G., X. Zhao, F. Sun, and J. Wang. 2018. “Effect of Subgrade on Piezoelectric Energy Harvesting under Traffic loads.” International Journal of Pavement Engineering 19 (8): 661–674. doi:10.1080/10298436.2017.1413241.
   Web of Science ®Google Scholar
• Duarte, F., and A. Ferreira. 2016. “Energy Harvesting on Road Pavements: State of the art.” Proceedings of the Institution of Civil Engineers: Energy 169 (2): 1–12.
   Web of Science ®Google Scholar
• Efthymiou, C., M. Santamouris, D. Kolokotsa, and A. Koras. 2016. “Development and Testing of Photovoltaic Pavement for Heat Island mitigation.” Solar Energy 130: 148–160. doi:10.1016/j.solener.2016.01.054.
   Web of Science ®Google Scholar
• Eom, H. J. 2013. “Faraday’s Law of Induction.” In Primary Theory of Electromagnetics, 95–111. Dordrcht: Springer.
   Google Scholar
• Faisal, F., W. Nan, and K. Kapoor. 2016. “Energy Harvesting in Pavement from Passing Vehicles with Piezoelectric Composite Plate for Ice Melting.” Paper presented at the Active and Passive Smart Structures and Integrated Systems 2016.
   Google Scholar
• Gao, Q., Y. Huang, L. Ming, Y. Liu, and Y. Y. Yan. 2010. “Experimental Study of Slab Solar Collection on the Hydronic System of road.” Solar Energy 84 (12): 2096–2102. doi:10.1016/j.solener.2010.09.008.
   Web of Science ®Google Scholar
• Garcia-Pozuelo, D., A. Gauchia, E. Olmeda, and V. Diaz. 2014. “Bump Modeling and Vehicle Vertical Dynamics prediction.” Advances in Mechanical Engineering 6: 736576. doi:10.1155/2014/736576.
   Google Scholar
• Gholikhani, M., R. Nasouri, S. A. Tahami, S. Legette, S. Dessouky, and A. Montoya. 2019a. “Harvesting Kinetic Energy from Roadway Pavement through an Electromagnetic Speed bump.” Applied Energy 250: 503–511. doi:10.1016/j.apenergy.2019.05.060.
   Web of Science ®Google Scholar
• Gholikhani, M., S. A. Tahami, and S. Dessouky. 2019. “Harvesting Energy from Pavement–Electromagnetic Approach.” Paper presented at the MATEC Web of Conferences, San Antonio: TX. doi:10.1051/matecconf/201927106001
   Google Scholar
• Gopalakrishnan, S. 2012. “A Public Health Perspective of Road Traffic accidents.” Journal of Family Medicine and Primary Care 1 (2): 144. doi:10.4103/2249-4863.104987.
   PubMedGoogle Scholar
• Guo, L., and L. Qing. 2017. “Potentials of Piezoelectric and Thermoelectric Technologies for Harvesting Energy from pavements.” Renewable and Sustainable Energy Reviews 72: 761–773. doi:10.1016/j.rser.2017.01.090.
   Web of Science ®Google Scholar
• Han, C., W. Guangxi, and X. B. Yu. 2018. “Performance Analyses of Geothermal and Geothermoelectric Pavement Snow Melting System.” Journal of Energy Engineering 144 (6): 04018067. doi:10.1061/(ASCE)EY.1943-7897.0000585.
   Web of Science ®Google Scholar
• Iqbal, M., and F. U. Khan. 2018. “Hybrid Vibration and Wind Energy Harvesting Using Combined Piezoelectric and Electromagnetic Conversion for Bridge Health Monitoring applications.” Energy Conversion and Management 172: 611–618. doi:10.1016/j.enconman.2018.07.044.
   Web of Science ®Google Scholar
• Izadgoshasb, I., Y. Y. Lim, N. Lake, L. Tang, R. V. Padilla, and T. Kashiwao. 2018. “Optimizing Orientation of Piezoelectric Cantilever Beam for Harvesting Energy from Human walking.” Energy Conversion and Management 161: 66–73. doi:10.1016/j.enconman.2018.01.076.
   Web of Science ®Google Scholar
• Jiang, W., D. Yuan, X. Shudong, H. Huitao, J. Xiao, A. Sha, and Y. Huang. 2017. “Energy Harvesting from Asphalt Pavement Using Thermoelectric technology.” Applied Energy 205: 941–950. doi:10.1016/j.apenergy.2017.08.091.
   Web of Science ®Google Scholar
• Jiang, X. Z., Y. C. Li, J. Wang, and J. C. Li. 2014. “Electromechanical Modeling and Experimental Analysis of a Compression-based Piezoelectric Vibration Energy harvester.” International Journal of Smart and Nano Materials 5 (3): 152–168. doi:10.1080/19475411.2014.919971.
   Google Scholar
• Johnson, L., and A. J. Nedzesky. 2004. “A Comparative Study of Speed Humps, Speed Slots and Speed Cushions.” Paper presented at the ITE Annual Meeting.
   Google Scholar
• Leijon, M., O. Danielsson, M. Eriksson, K. Thorburn, H. Bernhoff, J. Isberg, J. Sundberg, I. Ivanova, E. Sjöstedt, and Å. Olov. 2006. “An Electrical Approach to Wave Energy conversion.” Renewable Energy 31 (9): 1309–1319. doi:10.1016/j.renene.2005.07.009.
   Web of Science ®Google Scholar
• Li, Z., L. Zuo, J. Kuang, and G. Luhrs. 2012. “Energy-harvesting Shock Absorber with a Mechanical Motion Rectifier.” Smart Materials and Structures 22 (2): 025008. doi:10.1088/0964-1726/22/2/025008.
   Web of Science ®Google Scholar
• Li, Z., Z. Yan, J. Luo, and Z. Yang. 2019. “Performance Comparison of Electromagnetic Energy Harvesters Based on Magnet Arrays of Alternating Polarity and configuration.” Energy Conversion and Management 179: 132–140. doi:10.1016/j.enconman.2018.10.060.
   Web of Science ®Google Scholar
• Mallick, R., J. Carelli, L. Albano, S. Bhowmick, and A. Veeraragavan. 2011. “Evaluation of the Potential of Harvesting Heat Energy from Asphalt pavements.” International Journal of Sustainable Engineering 4 (2): 164–171. doi:10.1080/19397038.2010.550336.
   Google Scholar
• Mallick, R. B., B.-L. Chen, and S. Bhowmick. 2009. “Harvesting Energy from Asphalt Pavements and Reducing the Heat Island effect.” International Journal of Sustainable Engineering 2 (3): 214–228. doi:10.1080/19397030903121950.
   Google Scholar
• Mallick, R. B., B.-L. Chen, and S. Bhowmick. 2012. “Harvesting Heat Energy from Asphalt Pavements: Development of and Comparison between Numerical Models and experiment.” International Journal of Sustainable Engineering 5 (2): 159–169. doi:10.1080/19397038.2011.574742.
   Google Scholar
• McCarthy, J. M., S. Watkins, A. Deivasigamani, and S. J. John. 2016. “Fluttering Energy Harvesters in the Wind: A review.” Journal of Sound and Vibration 361: 355–377. doi:10.1016/j.jsv.2015.09.043.
   Web of Science ®Google Scholar
• Mihyeon Jeon, C., and A. Amekudzi. 2005. “Addressing Sustainability in Transportation Systems: Definitions, Indicators, and metrics.” Journal of Infrastructure Systems 11 (1): 31–50. doi:10.1061/(ASCE)1076-0342(2005)11:1(31).
   Web of Science ®Google Scholar
• Mirzanamadi, R., C.-E. Hagentoft, and P. Johansson. 2018. “An Analysis of Hydronic Heating Pavement to Optimize the Required Energy for anti-icing.” Applied Thermal Engineering 144: 278–290. doi:10.1016/j.applthermaleng.2018.08.053.
   Web of Science ®Google Scholar
• Moure, A., M. A. Izquierdo Rodríguez, S. Hernández Rueda, A. Gonzalo, F. Rubio-Marcos, D. Urquiza Cuadros, A. Pérez-Lepe, and J. F. Fernández. 2016. “Feasible Integration in Asphalt of Piezoelectric Cymbals for Vibration Energy Harvesting.” Energy Conversion and Management 112: 246–253. doi:10.1016/j.enconman.2016.01.030.
   Web of Science ®Google Scholar
• Múčka, P. 2016. “Energy-harvesting Potential of Automobile Suspension.” Vehicle System Dynamics 54 (12): 1651–1670. doi:10.1080/00423114.2016.1227077.
   Web of Science ®Google Scholar
• Nawy, E. G. 2008. Concrete Construction Engineering Handbook. Boca Raton, FL: CRC press.
   Google Scholar
• Obeid, H. H., A. K. Jaleel, and N. A. Hassan. 2014. “Design and Motion Modeling of an Electromagnetic Hydraulic Power Hump Harvester.” Advances in Mechanical Engineering 6: 150293. doi:10.1155/2014/150293.
   Google Scholar
• Oliveira-Pinto, S., P. Rosa-Santos, and F. Taveira-Pinto. 2019. “Electricity Supply to Offshore Oil and Gas Platforms from Renewable Ocean Wave Energy: Overview and Case Study Analysis.” Energy Conversion and Management 186: 556–569. doi:10.1016/j.enconman.2019.02.050.
   Web of Science ®Google Scholar
• Pan, P., W. Shaopeng, Y. Xiao, and G. Liu. 2015. “A Review on Hydronic Asphalt Pavement for Energy Harvesting and Snow Melting.” Renewable and Sustainable Energy Reviews 48: 624–634. doi:10.1016/j.rser.2015.04.029.
   Web of Science ®Google Scholar
• Papagiannakis, A. T., A. Montoya, S. Dessouky, and J. Helffrich. 2017. “Development and Evaluation of Piezoelectric Prototypes for Roadway Energy Harvesting.” Journal of Energy Engineering 143 (5): 04017034. doi:10.1061/(ASCE)EY.1943-7897.0000467.
   Web of Science ®Google Scholar
• Parkhill, M., R. Sooklall, and G. Bahar. 2007. “Updated Guidelines for the Design and Application of Speed Humps.” Paper presented at the ITE 2007 Annual Meeting and Exhibit. Pittsburgh: Institute of Transportation Engineers.
   Google Scholar
• Partodezfoli, M., A. Rezaey, Z. Baniasad, and H. Rezaey. 2012. “A Novel Speed-breaker for Electrical Energy Generation Suitable for Elimination of Remote Parts of Power Systems Where Is near to Roads.” Journal of Basic and Applied Scientific Research 2 (6): 6285–6292.
   Google Scholar
• Pears, A. 2005. “Sustainability and Roads: Capturing the ESD Opportunity.” Urban Policy and Research 23 (2): 235–245. doi:10.1080/08111470500136365.
   Google Scholar
• Rome, L. C., L. Flynn, E. M. Goldman, and T. D. Yoo. 2005. “Generating Electricity while Walking with Loads.” Science 309 (5741): 1725–1728. doi:10.1126/science.1111063.
   PubMed Web of Science ®Google Scholar
• Roshani, H., P. Jagtap, S. Dessouky, A. Montoya, and A. T. Papagiannakis. 2017. “Theoretical and Experimental Evaluation of Two Roadway Piezoelectric-Based Energy Harvesting Prototypes.” Journal of Materials in Civil Engineering 30 (2): 04017264. doi:10.1061/(ASCE)MT.1943-5533.0002112.
   Web of Science ®Google Scholar
• Saleh, N. F., A. A. Zalghout, S. A. Sari Ad Din, G. R. Chehab, and G. A. Saad. 2019. “Design, Construction, and Evaluation of Energy-harvesting Asphalt Pavement Systems.” Road Materials and Pavement Design 1–28. doi:10.1080/14680629.2018.1564352.
   Web of Science ®Google Scholar
• Santamouris, M. 2013. “Using Cool Pavements as a Mitigation Strategy to Fight Urban Heat island—A Review of the Actual Developments.” Renewable and Sustainable Energy Reviews 26: 224–240. doi:10.1016/j.rser.2013.05.047.
   Web of Science ®Google Scholar
• Sarma,, B. S., V. Jyothi, and D. Sudhir. 2014. “Design of Power Generation Unit Using Roller Mechanism.” IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE) 9 (3): 55–60. doi:10.9790/1676.
   Google Scholar
• Sun, W., L. Guoyang, Y. Cheng, S. Chen, Y. Hou, D. Wang, L. Wang, and M. Oeser. 2018. “The State of the Art: Application of Green Technology in Sustainable Pavement.” Advances in Materials Science and Engineering 2018, 2018, 1-9.
   Web of Science ®Google Scholar
• Tahami, S. A., M. Gholikhani, R. Nasouri, and S. Dessouky. 2019a. “Evaluation of a Novel Road Thermoelectric Generator System.” Paper presented at the MATEC Web of Conferences, San Antonio: TX. doi:10.1051/matecconf/201927108002.
   Google Scholar
• Tahami, S. A., M. Gholikhani, R. Nasouri, S. Dessouky, and A. T. Papagiannakis. 2019b. “Developing a New Thermoelectric Approach for Energy Harvesting from Asphalt Pavements.” Applied Energy 238: 786–795. doi:10.1016/j.apenergy.2019.01.152.
   Web of Science ®Google Scholar
• Talebsafa, M., S. A. Romanoschi, A. T. Papagiannakis, and C. Popescu. 2019. “Evaluation of Strains at the Bottom of the Asphalt Base Layer of a Semi-Rigid Pavement under a Class 6 Vehicle.” Paper presented at the MATEC Web of Conferences, San Antonio, TX. doi:10.1051/matecconf/201927108008.
   Google Scholar
• Todaria, P., L. Wang, A. Pandey, J. O’Connor, D. McAvoy, T. Harrigan, B. Chernow, and L. Zuo. 2015. “Design, Modeling and Test of a Novel Speed Bump Energy Harvester.” Paper presented at the SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring.
   Google Scholar
• Wang, H., A. Jasim, and X. Chen. 2018. “Energy Harvesting Technologies in Roadway and Bridge for Different applications–A Comprehensive Review.” Applied Energy 212: 1083–1094. doi:10.1016/j.apenergy.2017.12.125.
   Web of Science ®Google Scholar
• Wang, L., J. Park, W. Zhou, J. Ban, and L. Zuo. 2014. “On-Road Energy Harvesting for Traffic Monitoring.”
   Google Scholar
• Wang, L., J. Park, W. Zhou, and L. Zuo. 2016a. “A Large-Scale On-Road Energy Harvester From Highway Vibration.” Paper presented at the ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference.Charlotte, North Carolina: American Society of Mechanical Engineers Digital Collection.
   Google Scholar
• Wang, L., P. Todaria, A. Pandey, J. O’Connor, B. Chernow, and L. Zuo. 2016b. “An Electromagnetic Speed Bump Energy Harvester and Its Interactions with Vehicles.” IEEE/ASME Transactions on Mechatronics 21 (4): 1985–1994. doi:10.1109/TMECH.2016.2546179.
   Web of Science ®Google Scholar
• Wang, W., J. Cao, N. Zhang, J. Lin, and W.-H. Liao. 2017. “Magnetic-spring Based Energy Harvesting from Human Motions: Design, Modeling and Experiments.” Energy Conversion and Management 132: 189–197. doi:10.1016/j.enconman.2016.11.026.
   Web of Science ®Google Scholar
• Wardlaw, J. L., I. Karaman, and A. Karsilayan. 2013. “Low-power Circuits and Energy Harvesting for Structural Health Monitoring of Bridges.” IEEE Sensors Journal 13 (2): 709–722. doi:10.1109/JSEN.2012.2226712.
   Web of Science ®Google Scholar
• Xiang, B., X. Cao, Y. Yuan, L. Sun, W. Hongwei, and F. Haghighat. 2018. “A Novel Hybrid Energy System Combined with Solar-road and Soil-regenerator: Dynamic Model and Operational Performance.” Energy Conversion and Management 156: 376–387. doi:10.1016/j.enconman.2017.11.066.
   Web of Science ®Google Scholar
• Xu, H., D. Wang, Y. Tan, J. Zhou, and M. Oeser. 2018. “Investigation of Design Alternatives for Hydronic Snow Melting Pavement Systems in China.” Journal of Cleaner Production 170: 1413–1422. doi:10.1016/j.jclepro.2017.09.262.
   Web of Science ®Google Scholar
• Xu, H., and Y. Tan. 2015. “Modeling and Operation Strategy of Pavement Snow Melting Systems Utilizing Low-temperature Heating Fluids.” Energy 80: 666–676. doi:10.1016/j.energy.2014.12.022.
   Web of Science ®Google Scholar
• Yang, C. H., Y. Song, M. S. Woo, J. H. Eom, G. J. Song, J. H. Kim, J. Kim, T. H. Lee, J. Y. Choi, and T. H. Sung. 2017a. “Feasibility Study of Impact-based Piezoelectric Road Energy Harvester for Wireless Sensor Networks in Smart Highways.” Sensors and Actuators A: Physical 261: 317-324.
   Web of Science ®Google Scholar
• Yang, H., M. Guo, L. Wang, Y. Hou, Q. Zhao, D. Cao, B. Zhou, and D. Wang. 2017b. “Investigation on the Factors Influencing the Performance of Piezoelectric Energy Harvester.” Road Materials and Pavement Design 18 (sup3): 180–189. doi:10.1080/14680629.2017.1329873.
   Web of Science ®Google Scholar
• Yu, W., Y. Xin, M. Guo, and L. Chen. 2014. “State of the Art and Practice of Pavement Anti-icing and De-icing Techniques.” Sciences in Cold and Arid Regions 6 (1): 14–21.
   Google Scholar
• Zhang, L. B., H. L. Dai, Y. W. Yang, and L. Wang. 2019. “Design of High-efficiency Electromagnetic Energy Harvester Based on a Rolling Magnet.” Energy Conversion and Management 185: 202–210. doi:10.1016/j.enconman.2019.01.089.
   Web of Science ®Google Scholar
• Zhang, X., and K. T. Chau. 2011. “An Automotive Thermoelectric–Photovoltaic Hybrid Energy System Using Maximum Power Point Tracking.” Energy Conversion and Management 52 (1): 641–647. doi:10.1016/j.enconman.2010.07.041.
   Web of Science ®Google Scholar
• Zhang, X., Z. Zhang, H. Pan, W. Salman, Y. Yuan, and Y. Liu. 2016a. “A Portable High-efficiency Electromagnetic Energy Harvesting System Using Supercapacitors for Renewable Energy Applications in Railroads.” Energy Conversion and Management 118: 287–294. doi:10.1016/j.enconman.2016.04.012.
   Web of Science ®Google Scholar
• Zhang, Z., X. Zhang, Y. Rasim, C. Wang, D. Bing, and Y. Yuan. 2016b. “Design, Modelling and Practical Tests on a High-voltage Kinetic Energy Harvesting (EH) System for a Renewable Road Tunnel Based on Linear Alternators.” Applied Energy 164: 152–161. doi:10.1016/j.apenergy.2015.11.096.
   Web of Science ®Google Scholar