References
- Akçaözoğlu, S., C. D. Atis, and K. Akçaözoğlu. 2010. “An Investigation on the Use of Shredded Waste PET Bottles as Aggregate in Lightweight Concrete.” Waste Management 30 (2): 285–290. doi:https://doi.org/10.1016/j.wasman.2009.09.033.
- AL-Manaseer, A. A., and T. R. Dalal. 1997. “Concrete Containing Plastic Aggregates.” Concrete International 19 (8): 47–52.
- Al-Tayeb, M. M., B. A. Bakar, H. Ismail, and H. M. Akil. 2013. “Effect of Partial Replacement of Sand by Recycled Fine Crumb Rubber on the Performance of Hybrid Rubberized-normal Concrete under Impact Load: Experiment and Simulation.” Journal of Cleaner Production 59: 284–289. doi:https://doi.org/10.1016/j.jclepro.2013.04.026.
- Al-Tayeb, M. M., H. Ismail, O. Dawoud, S. R. Wafi, and I. Al Daoor. 2017. “Ultimate Failure Resistance of Concrete with Partial Replacements of Sand by Waste Plastic of Vehicles under Impact Load.” International Journal of Sustainable Built Environment 6 (2): 610–616. doi:https://doi.org/10.1016/j.ijsbe.2017.12.008.
- American Society for Testing and Materials (ASTM) C192/192. 2006. “Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, Vol. 4.02.” West Conshohocken, PA, USA.
- American Society for Testing and Materials (ASTM) C39/C39. 2001. “Test Method for Compressive Strength of Cylindrical Concrete Specimens.” Pennsylvania: Annual Book of ASTM Standards.
- American Society for Testing and Materials (ASTM) C469. 1994. “Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression.” Pennsylvania: Annual Book of ASTM Standards.
- American Society for Testing and Materials (ASTM) C78. 1994. “Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-point Loading).” West Conshohocken, PA: ASTM International.
- Banthia, N. 1987. “Impact Resistance of Concrete.” PhD thesis, University of British Columbia, Vancouver, B.C., Canada.
- Banthia, N., S. Mindess, A. Bentur, and M. Pigeon. 1989. “Impact Testing of Concrete Using a Drop-weight Impact Machine.” Experimental Mechanics 29 (1): 63–69. doi:https://doi.org/10.1007/BF02327783.
- Bhardwaj, B., and P. Kumar. 2017. “Waste Foundry Sand in Concrete: A Review.” Construction and Building Materials 156: 661–674. doi:https://doi.org/10.1016/j.conbuildmat.2017.09.010.
- Chopra, A. K. 2007. Dynamics of Structures: Theory and Application to Earthquake Engineering. 3rd ed. Prentice-Hall.
- Fu, H., M. Erki, and M. Seckin. 1991. “Review of Effects of Loading Rate on Concrete in Compression.” Journal of Structural Engineering 117 (12): 3645. doi:https://doi.org/10.1061/(ASCE)0733-9445(1991)117:12(3645).
- Gholipour, G., C. Zhang, and A. A. Mousavi. 2018. “Effects of Axial Load on Nonlinear Response of RC Columns Subjected to Lateral Impact Load: Ship-pier Collision.” Engineering Failure Analysis 91: 397–418. doi:https://doi.org/10.1016/j.engfailanal.2018.04.055.
- Gholipour, G., C. Zhang, and A. A. Mousavi. 2019. “Loading Rate Effects on the Responses of Simply Supported RC Beams Subjected to the Combination of Impact and Blast Loads.” Engineering Structures 201: 109837. doi:https://doi.org/10.1016/j.engstruct.2019.109837.
- Ismail, Z. Z., and E. A. AL-Hashmi. 2008. “Use of Waste Plastic in Concrete Mixture as Aggregate Replacement.” Waste Management 28 (11): 2041–2047. doi:https://doi.org/10.1016/j.wasman.2007.08.023.
- LUSAS 14. 2006. “Theory Manual Volume 1.” FEA Ltd., V.14.0.3. Surrey, UK.
- MoEU. 2012. “Information Received during the Eionet Consultation of the Paper, Email of 14 November 2012 from Arzu Nuray.” Turkish Ministry of Environment and Urbanisation.
- Mohammadhosseini, H., A. S. M. Abdul Awal, and J. B. Mohd Yatim. 2017. “The Impact Resistance and Mechanical Properties of Concrete Reinforced with Waste Polypropylene Carpet Fibres.” Construction and Building Materials 143: 147–157. doi:https://doi.org/10.1016/j.conbuildmat.2017.03.109.
- Mohammadhosseini, H., M. M. Tahir, and A. R. M. Sam. 2018. “The Feasibility of Improving Impact Resistance and Strength Properties of Sustainable Concrete Composites by Adding Waste Metalized Plastic Fibres.” Construction and Building Materials 169: 223–236. doi:https://doi.org/10.1016/j.conbuildmat.2018.02.210.
- Naik, T. R., S. S. Singh, C. O. Huber, and B. S. Brodersen. 1996. “Use of Post-consumer Waste Plastics in Cement-based Composites.” Cement and Concrete Research 26 (10): 1489–1492. doi:https://doi.org/10.1016/0008-8846(96)00135-4.
- Oñate, E. 2009. Structural Analysis with the Finite Element Method. Linear Statics, Volume 1: Basis and Solids (Lecture Notes on Numerical Methods in Engineering and Sciences). Springer.
- Saikia, N., and J. de Brito. 2012. “Use of Plastic Waste as Aggregate in Cement Mortar and Concrete Preparation: A Review.” Construction and Building Materials 34: 385–401. doi:https://doi.org/10.1016/j.conbuildmat.2012.02.066.
- Siddique, R., J. Khatib, and I. Kaur. 2008. “Use of Recycled Plastic in Concrete: A Review.” Waste Management 28 (10): 1835–1852. doi:https://doi.org/10.1016/j.wasman.2007.09.011.
- Sobhan, K. H., and M. Mashna. 2002. “Tensile Strength and Toughness of Soil–Cement–Fly-Ash Composite Reinforced with Recycled High-Density Polyethylene Strips.”.Journal of Materials in Civil Engineering 14 (2): 177–184. doi:https://doi.org/10.1061/(ASCE)0899-1561(2002)14:2(177).
- Suaris, W. 1983. “Properties of Concrete Subjected to Impact.” Journal of Structural Engineering 109 (7): 1727. doi:https://doi.org/10.1061/(ASCE)0733-9445(1983)109:7(1727).
- Zhang, C., G. Gholipour, and A. A. Mousavi. 2019. “Nonlinear Dynamic Behavior of Simply-supported RC Beams Subjected to Combined Impact-blast Loading.” Engineering Structures 181: 124–142. doi:https://doi.org/10.1016/j.engstruct.2018.12.014.