References
- Abbass, R. A., P. Kumar, and A. El-Gendy. 2018. “An Overview of Monitoring and Reduction Strategies for Health and Climate Change Related Emissions in the Middle East and North Africa Region.” Atmospheric Environment 175: 33–43. doi:https://doi.org/10.1016/j.atmosenv.2017.11.061.
- Abdul-Wahab, S. A., G. A. Al-Rawas, S. Ali, and H. Al-Dhamri. 2016. “Impact of the Addition of Oil-Based Mud on Carbon Dioxide Emissions in a Cement Plant.” Journal of Cleaner Production 112: 4214–4225. doi:https://doi.org/10.1016/j.jclepro.2015.06.062.
- Aïtcin, P. C., and R. J. Flatt. 2015. “Science and Technology of Concrete Admixtures.” Science and Technology of Concrete Admixtures 1–613. doi:https://doi.org/10.1016/C2015-0-00150-2.
- Akin Altun, I., and Y. Sert. 2004. “Utilization of Weathered Phosphogypsum as Set Retarder in Portland Cement.” Cement and Concrete Research 34 (4): 677–680. doi:https://doi.org/10.1016/j.cemconres.2003.10.017.
- Al Dhamri, H. S., S. A. Abdul-Wahab, C. Velis, and L. Black. 2020. “Oil-Based Mud Cutting as an Additional Raw Material in Clinker Production.” Journal of Hazardous Materials 384. doi:https://doi.org/10.1016/j.jhazmat.2019.121022.
- Ali, M. B., R. Saidur, and M. S. Hossain. 2011. “A Review on Emission Analysis in Cement Industries.” Renewable and Sustainable Energy Reviews 15 (5): 2252–2261. doi:https://doi.org/10.1016/j.rser.2011.02.014.
- Allahverdi, A., and S. Ahmadnezhad. 2014. “Mechanical Activation of Silicomanganese Slag and Its Influence on the Properties of Portland Slag Cement.” Powder Technology 251: 41–51. doi:https://doi.org/10.1016/j.powtec.2013.10.023.
- Aranda Usón, A., A. M. López-Sabirón, G. Ferreira, and E. Llera Sastresa. 2013. “Uses of Alternative Fuels and Raw Materials in the Cement Industry as Sustainable Waste Management Options.” Renewable and Sustainable Energy Reviews 23: 242–260. doi:https://doi.org/10.1016/j.rser.2013.02.024.
- ASTM, 2007. C109/C109M-07. “Standard Test Method for Compressive Strength of Hydraulic Cement Mortars.” Chem. Anal. 04, 1–9. 10.1520/C0109_C0109M–05
- ASTM, 2013. C150. “Standard Test Methods for Chemical Analysis of Hydraulic Cement.” Am. Soc Test. Mater. Proc. 10.1520/C0114–13
- ASTM, 2016. C595/C595M-16. ASTM C595-03. “Standard Specification for Blended Hydraulic Cements.” Annu. B. ASTM Stand. https://doi.org/10.1520/C0595.
- ASTM, 1999. C807, “Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified.” Current 96, 1–4. https://doi.org/10.1520/C0807-08.2.
- ASTM Committee, 2016. C01.10, ASTM C150/C150M-16. “Standard Specification for Portland Cement.” Annual Book of ASTM Standards 04.1. https://doi.org/10.1520/C0150.
- Baeza-Brotons, F., P. Garcés, J. Payá, and J. M. Saval. 2014. “Portland Cement Systems with Addition of Sewage Sludge Ash. Application in Concretes for the Manufacture of Blocks.” Journal of Cleaner Production 82: 112–124. doi:https://doi.org/10.1016/j.jclepro.2014.06.072.
- Barcelo, L., J. Kline, G. Walenta, and E. Gartner. 2014. “Cement and Carbon Emissions.” Materials and Structures/Materiaux Et Constructions 47 (6): 1055–1065. doi:https://doi.org/10.1617/s11527-013-0114-5.
- Benhelal, E., G. Zahedi, E. Shamsaei, and A. Bahadori. 2013. “Global Strategies and Potentials to Curb CO2 Emissions in Cement Industry.” Journal of Cleaner Production 51: 142–161. doi:https://doi.org/10.1016/j.jclepro.2012.10.049.
- Bijen, J. 1996. “Benefits of Slag and Fly Ash.” Construction and Building Materials 10 (5 SPEC. ISS.): 309–314. doi:https://doi.org/10.1016/0950-0618(95)00014-3.
- Chatterjee, A., and T. Sui. 2019. “Alternative Fuels – Effects on Clinker Process and Properties.” Cement and Concrete Research 123. doi:https://doi.org/10.1016/j.cemconres.2019.105777.
- Chen, H., X. Ma, and H. Dai. 2010. “Reuse of Water Purification Sludge as Raw Material in Cement Production.” Cement and Concrete Composites 32 (6): 436–439. doi:https://doi.org/10.1016/j.cemconcomp.2010.02.009.
- Chen, Z., and C. S. Poon. 2017. “Comparative Studies on the Effects of Sewage Sludge Ash and Fly Ash on Cement Hydration and Properties of Cement Mortars.” Construction and Building Materials 154: 791–803. doi:https://doi.org/10.1016/j.conbuildmat.2017.08.003.
- Collins, F., and J. G. Sanjayan. 2000. “Effect of Pore Size Distribution on Drying Shrinkage of Alkali-Activated Slag Concrete.” Cement and Concrete Research 30 (9): 1401–1406. doi:https://doi.org/10.1016/S0008-8846(00)00327-6.
- Cordeiro, G. C., and C. P. Sales. 2015. “Pozzolanic Activity of Elephant Grass Ash and Its Influence on the Mechanical Properties of Concrete.” Cement and Concrete Composites 55: 331–336. doi:https://doi.org/10.1016/j.cemconcomp.2014.09.019.
- Czarnecki, L., and H. Justnes. 2012. “Sutainable & Durable Concrete.” Cement, Wapno, Beton 6: 341–362.
- Dabhade, A. N., S. R. Chaudari, and A. R. Gajbhaye. 2014. “Effect of Flyash on Recycle Coarse Aggregate Concrete.” International Journal of Civil Engineering Research 5 (35–42). http://www.ripublication.com/ijcer.htm
- Deolalkar, S. P. 2016. “Designing Green Cement Plants, Designing Green Cement Plants.” https://doi.org/10.1016/B978-0-12-803420-0.00023-8
- Donatello, S., and C. R. Cheeseman. 2013. “Recycling and Recovery Routes for Incinerated Sewage Sludge Ash (ISSA): A Review.” Waste Management 33 (11): 2328–2340. doi:https://doi.org/10.1016/j.wasman.2013.05.024.
- Donoghue, A. M. 2004. “Occupational Health Hazards in Mining: An Overview.” Occupational Medicine 54 (5): 283–289. doi:https://doi.org/10.1093/occmed/kqh072.
- EN 197-1. 2011. “Cement - Part 1: Composition, Specifications and Conformity Criteria for Common Cements.” European Committee for Standardization. NSAI Standards. https://infostore.saiglobal.com/preview/is/en/2011/i.s.en197-1-2011.pdf?sku=1492629
- Farzanegan, M. R., and G. Markwardt. 2018. “Development and Pollution in the Middle East and North Africa: Democracy Matters.” Journal of Policy Modeling 40 (2): 350–374. doi:https://doi.org/10.1016/j.jpolmod.2018.01.010.
- Fthenakis, V. M. 2003. “Overview of Potential Hazards.” Practical Handbook of Photovoltaics: Fundamentals and Applications 1–984. doi:https://doi.org/10.1016/B978-1-85617-390-2.X5000-4.
- Fytili, D., and A. Zabaniotou. 2008. “Utilization of Sewage Sludge in EU Application of Old and New Methods-A Review.” Renewable and Sustainable Energy Reviews 12 (1): 116–140. doi:https://doi.org/10.1016/j.rser.2006.05.014.
- Gartner, E. 2004. “Industrially Interesting Approaches to “Low-co2” Cements.” Cement and Concrete Research 34 (9): 1489–1498. doi:https://doi.org/10.1016/j.cemconres.2004.01.021.
- Gesoǧlu, M., E. Güneyisi, M. E. Kocabaǧ, V. Bayram, and K. Mermerdaş. 2012. “Fresh and Hardened Characteristics of Self Compacting Concretes Made with Combined Use of Marble Powder, Limestone Filler, and Fly Ash.” Construction and Building Materials 37: 160–170. doi:https://doi.org/10.1016/j.conbuildmat.2012.07.092.
- Gidarakos, E., and M. Aivalioti. 2012. “Industrial and Hazardous Waste Management.” Journal of Hazardous Materials 207-208: 1–2. doi:https://doi.org/10.1016/j.jhazmat.2011.10.083.
- Giergiczny, Z. 2019. “Fly Ash and Slag.” Cement and Concrete Research 124. doi:https://doi.org/10.1016/j.cemconres.2019.105826.
- Gineys, N., G. Aouad, and D. Damidot. 2010. “Managing Trace Elements in Portland Cement - Part I: Interactions between Cement Paste and Heavy Metals Added during Mixing as Soluble Salts.” Cement and Concrete Composites 32 (8): 563–570. doi:https://doi.org/10.1016/j.cemconcomp.2010.06.002.
- Hawkins, P., P. Tennis, and R. Detwiler. 2003. “The Use of Limestone in Portland Cement: A State-of-the-Art Review.”, Portland Cement Association. ISBN: 0-89312-229-7.Skokie, Ill. : Portland Cement Association, ©2003. https://www.worldcat.org/title/use-of-limestone-in-portland-cement-a-state-of-the-art-review/oclc/52539405
- Hendriks, C. A., E. Worrell, D. de Jager, K. Blok, and P. Riemer. 1998. “Emission Reduction of Greenhouse Gases from the Cement Industry” in Fourth International Conference on Greenhouse Gas Control Technologies, Interlaken, Switzerland. https://doi.org/10.1101/lm.722908
- Herfort, D., G. K. Moir, V. Johansen, F. Sorrentino, and H. Bolio Arceo. 2010. “The Chemistry of Portland Cement Clinker.” Advances in Cement Research 22 (4): 187–194. doi:https://doi.org/10.1680/adcr.2010.22.4.187.
- Hewlett, P. C. 2003. “Lea’s Chemistry of Cement and Concrete.” Lea’s Chemistry of Cement and Concrete 1–1057). doi:https://doi.org/10.1016/B978-0-7506-6256-7.X5007-3.
- Hsu, S., M. Chi, and R. Huang. 2018. “Effect of Fineness and Replacement Ratio of Ground Fly Ash on Properties of Blended Cement Mortar.” Construction and Building Materials 176: 250–258. doi:https://doi.org/10.1016/j.conbuildmat.2018.05.060.
- Huntzinger, D. N., and T. D. Eatmon. 2009. “A Life-Cycle Assessment of Portland Cement Manufacturing: Comparing the Traditional Process with Alternative Technologies.” Journal of Cleaner Production 17 (7): 668–675. doi:https://doi.org/10.1016/j.jclepro.2008.04.007.
- Husillos Rodríguez, N., S. Martínez-Ramírez, M. T. Blanco-Varela, M. Guillem, J. Puig, E. Larrotcha, and J. Flores. 2011. “Evaluation of Spray-Dried Sludge from Drinking Water Treatment Plants as a Prime Material for Clinker Manufacture.” Cement and Concrete Composites 33 (2): 267–275. doi:https://doi.org/10.1016/j.cemconcomp.2010.10.020.
- Ishak, S. A., and H. Hashim. 2015. “Low Carbon Measures for Cement Plant - A Review.” Journal of Cleaner Production 103: 260–274. doi:https://doi.org/10.1016/j.jclepro.2014.11.003.
- Ishak, S. A., H. Hashim, and T. S. Ting. 2016. “Eco Innovation Strategies for Promoting Cleaner Cement Manufacturing.” Journal of Cleaner Production 136: 133–149. doi:https://doi.org/10.1016/j.jclepro.2016.06.022.
- Kääntee, U., R. Zevenhoven, R. Backman, and M. Hupa. 2004. “Cement Manufacturing Using Alternative Fuels and the Advantages of Process Modelling.” Fuel Processing Technology 85 (4): 293–301. doi:https://doi.org/10.1016/S0378-3820(03)00203-0.
- Kajaste, R., and M. Hurme. 2016. “Cement Industry Greenhouse Gas Emissions - Management Options and Abatement Cost.” Journal of Cleaner Production 112: 4041–4052. doi:https://doi.org/10.1016/j.jclepro.2015.07.055.
- Kenai, S., W. Soboyejo, and A. Soboyejo. 2004. “Some Engineering Properties of Limestone Concrete.” Materials and Manufacturing Processes 19 (5): 949–961. doi:https://doi.org/10.1081/AMP-200030668.
- Khankhaje, E., M. W. Hussin, J. Mirza, M. Rafieizonooz, M. R. Salim, H. C. Siong, and M. N. M. Warid. 2016. “On Blended Cement and Geopolymer Concretes Containing Palm Oil Fuel Ash.” Materials & Design 89: 385–398. doi:https://doi.org/10.1016/j.matdes.2015.09.140.
- Khurana, S., R. Banerjee, and U. Gaitonde. 2002. “Energy Balance and Cogeneration for a Cement Plant.” Applied Thermal Engineering 22 (5): 485–494. doi:https://doi.org/10.1016/S1359-4311(01)00128-4.
- Kiddee, P., R. Naidu, and M. H. Wong. 2013. “Electronic Waste Management Approaches: An Overview.” Waste Management 33 (5): 1237–1250. doi:https://doi.org/10.1016/j.wasman.2013.01.006.
- Kurdowski, W. 2014. “Cement and Concrete Chemistry.” Cement and Concrete Chemistry 9789400779457: 1–700. doi:https://doi.org/10.1007/978-94-007-7945-7.
- Lee, N. K., and H. K. Lee. 2013. “Setting and Mechanical Properties of Alkali-Activated Fly Ash/slag Concrete Manufactured at Room Temperature.” Construction and Building Materials 47: 1201–1209. doi:https://doi.org/10.1016/j.conbuildmat.2013.05.107.
- Li, H., W. Xu, X. Yang, and J. Wu. 2014. “Preparation of Portland Cement with Sugar Filter Mud as Lime-based Raw Material.” Journal of Cleaner Production 66: 107–112. doi:https://doi.org/10.1016/j.jclepro.2013.11.003.
- Lin, K.-L., and C.-Y. Lin. 2005. “Hydration Characteristics of Waste Sludge Ash Utilized as Raw Cement Material.” Cement and Concrete Research 35 (10): 1999–2007. doi:https://doi.org/10.1016/j.cemconres.2005.06.008.
- Liu, J., Q. Qin, and Q. Yu. 2020. “The Effect of Size Distribution of Slag Particles Obtained in Dry Granulation on Blast Furnace Slag Cement Strength.” Powder Technology 362: 32–36. doi:https://doi.org/10.1016/j.powtec.2019.11.115.
- Liu, X., and N. Zhang. 2011. “Utilization of Red Mud in Cement Production: A Review.” Waste Management and Research 29 (10): 1053–1063. doi:https://doi.org/10.1177/0734242X11407653.
- Ludwig, H.-M., and W. Zhang. 2015. “Research Review of Cement Clinker Chemistry.” Cement and Concrete Research 78: 24–37. doi:https://doi.org/10.1016/j.cemconres.2015.05.018.
- Madlool, N. A., R. Saidur, M. S. Hossain, and N. A. Rahim. 2011. “A Critical Review on Energy Use and Savings in the Cement Industries.” Renewable and Sustainable Energy Reviews 15 (4): 2042–2060. doi:https://doi.org/10.1016/j.rser.2011.01.005.
- Marchon, D., and R. J. Flatt. 2016. “Mechanisms of Cement Hydration.” Science and Technology of Concrete Admixtures 129–145. doi:https://doi.org/10.1016/B978-0-08-100693-1.00008-4.
- Medina, C., W. Zhu, T. Howind, M. I. Sánchez De Rojas, and M. Frías. 2014. “Influence of Mixed Recycled Aggregate on the Physical-Mechanical Properties of Recycled Concrete.” Journal of Cleaner Production 68: 216–225. doi:https://doi.org/10.1016/j.jclepro.2014.01.002.
- Mehta, A., and D. K. Ashish. 2019. “Silica Fume and Waste Glass in Cement Concrete Production: A Review.” Journal of Building Engineering. doi:https://doi.org/10.1016/j.jobe.2019.100888.
- Mikulčić, H., H. Cabezas, M. Vujanović, and N. Duić. 2016. “Environmental Assessment of Different Cement Manufacturing Processes Based on Emergy and Ecological Footprint Analysis.” Journal of Cleaner Production 130: 213–221. doi:https://doi.org/10.1016/j.jclepro.2016.01.087.
- Nagaratnam, B. H., M. E. Rahman, A. K. Mirasa, M. A. Mannan, and S. O. Lame. 2016. “Workability and Heat of Hydration of Self-Compacting Concrete Incorporating Agro-Industrial Waste.” Journal of Cleaner Production 112: 882–894. doi:https://doi.org/10.1016/j.jclepro.2015.05.112.
- Nazer, A., J. Payá, M. V. Borrachero, and J. Monzó. 2016. “Use of Ancient Copper Slags in Portland Cement and Alkali Activated Cement Matrices.” Journal of Environmental Management 167: 115–123. doi:https://doi.org/10.1016/j.jenvman.2015.11.024.
- Nemerow, N. L. 2007. “Industrial Waste Treatment.” Industrial Waste Treatment. doi:https://doi.org/10.1016/B978-0-12-372493-9.X5031-5.
- Neupane, K. 2016. “Fly Ash and GGBFS Based Powder-Activated Geopolymer Binders: A Viable Sustainable Alternative of Portland Cement in Concrete Industry”. Mechanics of Materials 103: 110–122. doi:https://doi.org/10.1016/j.mechmat.2016.09.012.
- Nnorom, I. C., and O. Osibanjo. 2008. “Overview of Electronic Waste (E-waste) Management Practices and Legislations, and Their Poor Applications in the Developing Countries.” Resources, Conservation and Recycling 52 (6): 843–858. doi:https://doi.org/10.1016/j.resconrec.2008.01.004.
- Pacewska, B., and I. Wilińska. 2013. “Hydration of Cement Composites Containing Large Amount of Waste Materials.” Procedia Engineering 57: 53–62. doi:https://doi.org/10.1016/j.proeng.2013.04.009.
- Panesar, D. K. 2019. “Supplementary Cementing Materials.” Developments in the Formulation and Reinforcement of Concrete. doi:https://doi.org/10.1016/B978-0-08-102616-8.00003-4.
- Park, K.-B., S.-J. Kwon, and X.-Y. Wang. 2016. “Analysis of the Effects of Rice Husk Ash on the Hydration of Cementitious Materials.” Construction and Building Materials 105: 196–205. doi:https://doi.org/10.1016/j.conbuildmat.2015.12.086.
- Peray, K. E., and J. J. Waddell. 1986. “The Rotary Cement Kiln.” https://doi.org/10.1007/s13398-014-0173-7.2
- Puertas, F., I. García-Díaz, A. Barba, M. F. Gazulla, M. Palacios, M. P. Gómez, and S. Martínez-Ramírez. 2008. “Ceramic Wastes as Alternative Raw Materials for Portland Cement Clinker Production.” Cement and Concrete Composites 30 (9): 798–805. doi:https://doi.org/10.1016/j.cemconcomp.2008.06.003.
- Rai, P. K. 2016. “Impacts of Particulate Matter Pollution on Plants: Implications for Environmental Biomonitoring.” Ecotoxicology and Environmental Safety 129: 120–136. doi:https://doi.org/10.1016/j.ecoenv.2016.03.012.
- Rashad, A. M. 2013. “Metakaolin as Cementitious Material: History, Scours, Production and Composition-A Comprehensive Overview.” Construction and Building Materials 41: 303–318. doi:https://doi.org/10.1016/j.conbuildmat.2012.12.001.
- Roslan, N. H., M. Ismail, N. H. A. Khalid, and B. Muhammad. 2020. “Properties of Concrete Containing Electric Arc Furnace Steel Slag and Steel Sludge.” Journal of Building Engineering 28. doi:https://doi.org/10.1016/j.jobe.2019.101060.
- Saraya, M. E. S. I. 2014. “Study Physico-Chemical Properties of Blended Cements Containing Fixed Amount of Silica Fume, Blast Furnace Slag, Basalt and Limestone, a Comparative Study.” Construction and Building Materials 72: 104–112. doi:https://doi.org/10.1016/j.conbuildmat.2014.08.071.
- Sathawane, S. H., V. S. Vairagade, and K. S. Kene. 2013. “Combine Effect of Rice Husk Ash and Fly Ash on Concrete by 30% Cement Replacement.” Procedia Engineering 51: 35–44. doi:https://doi.org/10.1016/j.proeng.2013.01.009.
- Schneider, M. 2019. “The Cement Industry on the Way to a Low-carbon Future.” Cement and Concrete Research 124: 105792. doi:https://doi.org/10.1016/j.cemconres.2019.105792.
- Schneider, M., M. Romer, M. Tschudin, and H. Bolio. 2011. “Sustainable Cement Production-Present and Future.” Cement and Concrete Research 41 (7): 642–650. doi:https://doi.org/10.1016/j.cemconres.2011.03.019.
- Scott, P. W., J. M. Eyre, D. J. Harrison, and A. J. Bloodworth. 2005. “Markets for Industrial Mineral Products from Mining Waste.” Geological Society Special Publication 250. doi:https://doi.org/10.1144/GSL.SP.2005.250.01.06.
- Scrivener, K. L., P. Juilland, and P. J. M. Monteiro. 2015. “Advances in Understanding Hydration of Portland Cement.” Cement and Concrete Research 78: 38–56. doi:https://doi.org/10.1016/j.cemconres.2015.05.025.
- Siddique, R., and J. Klaus. 2009. “Influence of Metakaolin on the Properties of Mortar and Concrete: A Review.” Applied Clay Science 43 (3–4): 392–400. doi:https://doi.org/10.1016/j.clay.2008.11.007.
- Singh, G., S. Kumar, M. K. Singh, and S. K. Mohapatra. 2016. “Environmental Impact Assessment of Ash Disposal System of a Thermal Power Plant.” International Journal of Hydrogen Energy 41 (35): 15887–15891. doi:https://doi.org/10.1016/j.ijhydene.2016.03.171.
- Smarzewski, P., and D. Barnat-Hunek. 2016. “Mechanical and Durability Related Properties of High Performance Concrete Made with Coal Cinder and Waste Foundry Sand.” Construction and Building Materials 121: 9–17. doi:https://doi.org/10.1016/j.conbuildmat.2016.05.148.
- Snellings, R., A. Salze, and K. L. Scrivener. 2014. “Use of X-Ray Diffraction to Quantify Amorphous Supplementary Cementitious Materials in Anhydrous and Hydrated Blended Cements.” Cement and Concrete Research 64: 89–98. doi:https://doi.org/10.1016/j.cemconres.2014.06.011.
- Soltanzadeh, F., M. Emam-Jomeh, A. Edalat-Behbahani, and Z. Soltan-Zadeh. 2018. “Development and Characterization of Blended Cements Containing Seashell Powder.” Construction and Building Materials 161: 292–304. doi:https://doi.org/10.1016/j.conbuildmat.2017.11.111.
- Stefanović, G. M., G. D. Vučković, M. M. Stojiljković, and M. B. Trifunović. 2010. “CO2 Reduction Options in Cement Industry - the Novi Popovac Case.” Thermal Science 14 (3): 671–679. doi:https://doi.org/10.2298/TSCI091211014S.
- Taruya, T., N. Okuno, and K. Kanaya. 2002. “Reuse of Sewage Sludge as Raw Material of Portland Cement in Japan.” In Water Science and Technology, 46 (10): 255–258. doi:org/10.2166/wst.2002.0347.
- Treiman, A. H., and E. J. Essene. 1984. “A Periclase-Dolomite-Calcite Carbonatite from the Oka Complex, Quebec, and Its Calculated Volatile Composition.” Contributions to Mineralogy and Petrology 85 (2): 149–157. doi:https://doi.org/10.1007/BF00371705.
- Uwasu, M., K. Hara, and H. Yabar. 2014. “World Cement Production and Environmental Implications.” Environmental Development 10 (1): 36–47. doi:https://doi.org/10.1016/j.envdev.2014.02.005.
- Valderrama, C., R. Granados, J. L. Cortina, C. M. Gasol, M. Guillem, and A. Josa. 2012. “Implementation of Best Available Techniques in Cement Manufacturing: A Life-Cycle Assessment Study.” Journal of Cleaner Production 25: 60–67. doi:https://doi.org/10.1016/j.jclepro.2011.11.055.
- Valdes-Vidal, G., A. Calabi-Floody, and E. Sanchez-Alonso. 2018. “Performance Evaluation of Warm Mix Asphalt Involving Natural Zeolite and Reclaimed Asphalt Pavement (RAP) for Sustainable Pavement Construction.” Construction and Building Materials 174: 576–585. doi:https://doi.org/10.1016/j.conbuildmat.2018.04.149.
- Valipour, M., F. Pargar, M. Shekarchi, and S. Khani. 2013. “Comparing A Natural Pozzolan, Zeolite, to Metakaolin and Silica Fume in Terms of Their Effect on the Durability Characteristics of Concrete: A Laboratory Study.” Construction and Building Materials 41: 879–888. doi:https://doi.org/10.1016/j.conbuildmat.2012.11.054.
- Van Oss, H. G., and A. C. Padovani. 2002. “Cement Manufacture and the Environment - Part I: Chemistry and Technology.” Journal of Industrial Ecology 6 (1): 89–106. doi:https://doi.org/10.1162/108819802320971650.
- Vejmelková, E., D. Koňáková, T. Kulovaná, M. Keppert, J. Žumár, P. Rovnaníková, Z. Keršner, M. Sedlmajer, and R. Černý. 2015. “Engineering Properties of Concrete Containing Natural Zeolite as Supplementary Cementitious Material: Strength, Toughness, Durability, and Hygrothermal Performance.” Cement and Concrete Composites 55: 259–267. doi:https://doi.org/10.1016/j.cemconcomp.2014.09.013.
- Voglis, N., G. Kakali, E. Chaniotakis, and S. Tsivilis. 2005. “Portland-Limestone Cements. Their Properties and Hydration Compared to Those of Other Composite Cements.” Cement and Concrete Composites 27 (2): 191–196. doi:https://doi.org/10.1016/j.cemconcomp.2004.02.006.
- Vollpracht, A., and W. Brameshuber. 2016. “Binding and Leaching of Trace Elements in Portland Cement Pastes.” Cement and Concrete Research 79: 76–92. doi:https://doi.org/10.1016/j.cemconres.2015.08.002.
- Wagih, A. M., H. Z. El-Karmoty, M. Ebid, and S. H. Okba. 2013. “Recycled Construction and Demolition Concrete Waste as Aggregate for Structural Concrete.” HBRC Journal 9 (3): 193–200. doi:https://doi.org/10.1016/j.hbrcj.2013.08.007.
- Wasilewski, M., and J. Duda. 2012. “Influence Construction of Suspension Preheater on Energy Consumption Process during Burning in Rotary Kiln.” XIVth International Symposium on Heat Transfer and Renewable Sources of Energy, Poland .
- Weng, C.-H., D.-F. Lin, and P.-C. Chiang. 2003. “Utilization of Sludge as Brick Materials.” Advances in Environmental Research 7 (3): 679–685. doi:https://doi.org/10.1016/S1093-0191(02)00037-0.
- Xu, W., J. Xu, J. Liu, H. Li, B. Cao, X. Huang, and G. Li. 2014. “The Utilization of Lime-Dried Sludge as Resource for Producing Cement.” Journal of Cleaner Production 83: 286–293. doi:https://doi.org/10.1016/j.jclepro.2014.07.070.
- Yan, K., H. Sun, F. Gao, D. Ge, and L. You. 2020. “Assessment and Mechanism Analysis of Municipal Solid Waste Incineration Bottom Ash as Aggregate in Cement Stabilized Macadam.” Journal of Cleaner Production 244. doi:https://doi.org/10.1016/j.jclepro.2019.118750.
- Yen, C.-L., D.-H. Tseng, and -T.-T. Lin. 2011. “Characterization of Eco-Cement Paste Produced from Waste Sludges.” Chemosphere 84 (2): 220–226. doi:https://doi.org/10.1016/j.chemosphere.2011.04.050.
- Yildirim, I. Z., and M. Prezzi. 2011. “Chemical, Mineralogical, and Morphological Properties of Steel Slag.” Advances in Civil Engineering 463638. doi:https://doi.org/10.1155/2011/463638.
- Younes, M. M., H. A. Abdel-Rahman, and M. M. Khattab. 2018. “Utilization of Rice Husk Ash and Waste Glass in the Production of Ternary Blended Cement Mortar Composites.” Journal of Building Engineering 20: 42–50. doi:https://doi.org/10.1016/j.jobe.2018.07.001.
- Zhang, H., H. Wang, X. Zhu, Y. J. Qiu, K. Li, R. Chen, and Q. Liao. 2013. “A Review of Waste Heat Recovery Technologies Towards Molten Slag in Steel Industry.” Applied Energy 112: 956–966. doi:https://doi.org/10.1016/j.apenergy.2013.02.019.
- Zhang, W., Y. Hama, and S. H. Na. 2015. “Drying Shrinkage and Microstructure Characteristics of Mortar Incorporating Ground Granulated Blast Furnace Slag and Shrinkage Reducing Admixture.” Construction and Building Materials 93: 267–277. doi:https://doi.org/10.1016/j.conbuildmat.2015.05.103.