References
- Amarnath, Y., and C. Ramachandrudu. 2013. “Production and Properties of Foamed Concrete.” Proceedings of the International Conference & Exhibition on Lightweight Construction, Pune, India, February.
- ASTM C 796-97 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam. 1997.
- Awang, H., and Z. S. Alijoumaily. 2017. “Influence of Ground Granulated Blast Furnace Slag on Mechanical Properties of Foam Concrete.” Cognent Engineering, Civil & Environmental Engineering 4 (1). doi:https://doi.org/10.1080/23311916.2017.1409853.
- Chore, H. S., and M. P. Joshia. 2015. “Strength Evaluation of Concrete with Fly Ash and GGBFS as Cement Replacing Materials.” Advances in Concrete Construction 3 (3): 223–236. doi:https://doi.org/10.12989/acc.2015.3.3.223.
- Hong, S. I., and K. Y. Ann. 2017. “Estimation of Corrosion-Free Life for Concrete Containing Ground Granulated Blast-Furnace Slag under a Chloride-Bearing Environment.” Hindawi, Advances in Materials Science and Engineering 2017: 10. Article ID 3186371. doi:https://doi.org/10.1155/2017/3186371.
- IS: 2185 (Part3) − 1984 Indian Standard Specification for Concrete Masonry Units PART 3 Autoclaved Cellular (Aerated) Concrete Blocks. Bureau of Indian Standards, 1985, Manak Bhavan, 9 Baiiadur Shah Marg, New Delhi.
- IS:383-1970 Indian Standard Specification for Coarse and Fine Aggregates from Natural Sources for Concrete. Second Revision ed. Bureau of Indian Standards, 1971, Manak Bhavan, 9 Baiiadur Shah Marg, New Delhi.
- Jang, S.-Y., S. Karthick, and S.-J. Kwon. 2017. “Investigation on Durability Performance in Early Aged High-Performance Concrete Containing GGBFS and FA.” Advances in Materials and Engineering 2017: 1–11. doi:https://doi.org/10.1155/2017/3214696.
- Jones, M. R., and A. McCarthy. 2005. “Preliminary Views on the Potential of Foamed Concrete as a Structural Material.” Magazine of Concrete Research 57 (1): 21–31. doi:https://doi.org/10.1680/macr.2005.57.1.21.
- Kearsley, E. P., and H. F. Mostert. 2005. “Designing Mix Composition of Foamed Concrete with High Fly Ash Contents.” Proceedings of the International Conference, Scotland, UK: University of Dundee. August.
- Kearsley, E. P., and P. J. Wainwright. 2001. “Porosity and Permeability of Foamed Concrete.” Cement and Concrete Research 31 (5): 805–812. doi:https://doi.org/10.1016/S0008-8846(01)00490-2.
- Kearsley, E. P., and P. J. Wainwright. 2002. “Ash Content for Optimum Strength of Foamed Concrete.” Cement and Concrete Research 32: 241–246. doi:https://doi.org/10.1016/S0008-8846(01)00666-4.
- Mohd, P. S., Z. J. Hilmi, B. U. Mahmud, and J. Alengaram. 2013. “Oil Palm Shell Lightweight Concrete Containing High Volume Ground Granulated Blast Furnace Slag.” Construction and Building Materials 40: 231–238. doi:https://doi.org/10.1016/j.conbuildmat.2012.10.007.
- Muhammad, N., S. Hadi, N. Farhan, and M. Neaz Sheikh. 2017. “Design of Geopolymer Concrete with GGBFS at Ambient Curing Condition Using Taguchi Method.” Construction and Building Materials 140: 424–431. doi:https://doi.org/10.1016/j.conbuildmat.2017.02.131.
- Nambiar, E. K. K., and K. Ramamurthy. 2006. “Influence of Filler Type on the Properties of Foam Concrete.” Cement and Concrete Composites 28 (5): 475–480. doi:https://doi.org/10.1016/j.cemconcomp.2005.12.001.
- Nambiar, E. K. K., and K. Ramamurthy. 2007. “Sorption Characteristics of Foam Concrete.” Cement and Concrete Research 37 (9): 1341–1347. doi:https://doi.org/10.1016/j.cemconres.2007.05.010.
- Nambiar, E. K. K., and K. Ramamurthy. 2008. “Models for Strength Prediction of Foam Concrete.” Materials and Structures 41: 247–254. doi:https://doi.org/10.16117/s11527-007-9234-0.
- Osake, F. I. 2017. “Durability of Concrete Incorporating Ground Granulated Blast Furnace Slag for Water Infrastructures.” Nigerian Journal of Scientific Research 16 (3): 258–263. www.researchgate. net/publication/327321456.
- Panesar, D. K. 2013. “ Cellular concrete properties and the effect of synthetic and protein foaming agents.“Construction and building materials 44 (2013): 575–584.
- Richard, A. O., and M. Ramli. 2013.“Experimental production of sustainable lightweight foamed concrete. “Current Journal of Applied Science & Technology (2013): 994–1005.
- Sahu, S. S., I. S. R. Gandhi, and S. Khwairakpam. 2018. “State of the Art Review on the Characteristics of Surfactants and Foam from Foam Concrete Perspective.” Journal of Institution of Engineers India 99 (2): 391–405. doi:https://doi.org/10.1007/s40030-018-0288-5.
- Samad, S., A. Shah, and M. C. Limbachiya. 2017. “Strength Development Characteristics of Concrete Produced with Blended Cement Using Ground Granulated Blast Furnace Slag (GGBS) under Various Curing Conditions.” Sadhana 42 (7): 1203–1213. July. doi:https://doi.org/10.1007/s12046-017-0667-z.
- Saranya, P., P. Nagarajan, and A. P. Shashikala. 2018. “Eco-friendly GGBS Concrete: A State-of-The-Art Review.” Materials Science and Engineering 330: 012057. doi:https://doi.org/10.1088/1757-899X/330/1/012057.
- Siddique, R., and D. Kaur. 2012. “Properties of Ground Granulated Blast Furnace Slag (GGBFS) at Elevated Temperatures.” Journal of Advanced Research 3 (1): 45–51. doi:https://doi.org/10.1016/j.jare.2011.03.004.
- Zhao, X., S. K. Lim, C. S. Tan, B. Li, T. C. Ling, R. Huang, and Q. Wang. 2015. “Properties of Foamed Mortar Prepared with Granulated Blast-Furnace Slag.” Materials 8 (2): 462–473. doi:https://doi.org/10.3390/ma8020462.